ALDS MiniBuddyPro User manual

MiniBuddyPro
MiniBuddyPro
MiniBuddyPro warranty information:
General warranty: One Year limited warranty from date of purchase.
ALDS warrants the MiniBuddyPro amplier against defects in
materials
and/or workmanship for a period of 12 months from the date of
purchase.
Accessories such as the following have a 6 month warranty from date of
purchase as a kit with the MiniBuddyPro:
Microphones, charge cables, charger (if supplied with the original sale)
belt clip and carry case.
Exclusions: The warranty does not cover damage to or failure of
the unit or accessories due to heat, moisture, shock, misuse, poor
maintenance, improper charging, unusual wear and tear or tampering.
Warranty repair or replacement: In the event of failure, the
MiniBuddyPro and/or accessories will be repaired or replaced at the
manufacturers discretion.
Warranty Procedure:
All warranties are handled directly by the manufacturer.
To initiate a warranty claim, the procedure is as follows:
Contact ALDS warranty department on +1.866.845.2537 or
email [email protected] to receive a returns goods authorization number.
Send the item(s) back to ALDS with your supplied returns goods
authorization along with a copy of the original bill of purchase.
Include with the package a brief description of the problem.
The item(s) must be sent back to the warranty depot freight pre-paid and
in a safely packaged method. It is advisable to use a shipping method
which provides you with a tracking number of your shipment.
Include your full contact information such as name, phone number,
email, preferred method of contact and return shipping address.
Please Note: Any items returned to the warranty repair depot without
a returns goods authorization will be refused. Any items returned collect
will be refused. Any items returned without a copy of the original bill of
purchase will be refused.
Your MiniBuddyPro was distributed by:
Instruction Manual

Congratulations on your purchase
of an ALDS MiniBuddyPRO
The ALDS MiniBuddyPro voice amplier has been designed for
those with temporary or permanent voice impairment. When using the
MiniBuddyPro, a comfortable speech level can be achieved for eective
everyday communications while reducing vocal stress and strain.
The MiniBuddyPro features:
• Patented stylish design and appearance
• Ergonomic & comfortable design
• Lithium light weight rechargeable battery
• Extended battery life
• Powerful double magnetic trumpet for cleaner penetrating sound
• 10 watts of powerful output with excellent sound coverage
• Superior MP3 audio encoding technology supporting TF card &
U-ash drive disk
1. Power switch & volume control: Rotate the power wheel to
turn on or adjust the amplier volume. When the amplier is
turned on the blue light (8) will be continuously on.
2. Mode: short press: Short press the mode button to select a user
mode (USB, TF). When a USB or TF card is inserted, press the
mode button to cycle to the storage card you wish to play.
3. Play/Pause: A short press of the play/pause button will play or
pause the sound eects from the USB or TF cards. A long press
of the button till the blue light (8) blinks quickly will cause the
playback to continuous cycle the current sound track.
4. Previous: A short press of the button to go to previous sound
eects or a long press to fast backwards to initial starting point.
5. Next: Short press of the button to go to next sound eect track.
A long press will enable fast forwarding.
6. TF card slot: Insert a TF card to play MP3 les.
The MiniBuddyPro is compatible with most brands to a max
capacity of 32GB.
7. 3.5MM microphone jack port (For use with a wired
microphone. Wired microphone not included with kit, but can be
purchased separately)
8. Indicator light: Blue light will be on all the time in the state of
power on and in use. Red Light will blink when charging the unit.
The light will be solid red when MiniBuddyPro is fully charged
9. USB port: Insert a USB to play MP3 les, The MiniBuddyPro is
compatible with most brands to a max capacity of 32GB
10. Mini-USB charge cable port (DC 5V): Use only the supplied
charge cable for charging the MiniBuddyPro. IMPORTANT –
connect the charge cable with a compatible USB charger of DC 5V 9
500mA – 1.5A) charger. Unplug the MiniBuddyPro as soon as it
is fully charged to maintain safety and battery integrity.
11. Detachable belt clip
Wireless Microphone information:
• Put the headset microphone on in a way that feels most comfortable on
your head with the boom microphone coming down along the side of
your face towards your mouth.
• Turn the amplier power on and then turn on the microphone power on
• The microphone and amplier will automatically pair with each other
• If the microphone needs to be paired manually to the amplier; make
sure the amplier is on, press the M key on the amplier for 5 seconds
or until the blue indicator light blinks, then turn on the microphone and
press the (located on top of the microphone
transmitter body just above the volume buttons) for 5 seconds.
The blue icon on the voice amplier will stop ashing when the micro-
phone has successfully paired with the amplier.