
User’s Manual
Tube-U4G
4G/3G
Start Using Tube-U4G
Make sure Tube-U4G is inside a network coverage
area. On your computer’s desktop, double-click
program.
Tube-U4G Program Home Page
Tube-U4G contains the necessary drivers for
-
HARDWARE INSTALLATION
SOFTWARE INSTALLATION
drive added by Tube-U4G in " ",
"
(Please permit the
Tube-U4G program will appear on your computer
desktop.
< NOTE >
If the computer does not have Tube-U4G drivers
running for you.
< NOTE >
When using Tube-U4G with a PIN-enabled SIM card,
input proper PIN code to use Tube-U4G . If the
be locked. To unlock a locked SIM card, a PUK
code is required. The PUK code can be obtained
from the service provider. (When asking for PUK
code, please contact your service provider to
< NOTE >
Insert SIM card as shown in the diagram below.
< NOTE >
Tube-U4G is powered by USB host port, and
designed to work with USB 2.0 / 3.0 port on your
Tube-U4G with mini-USB connector, and plug
port on your computer.
There are various ways to mount Tube-U4G onto
a
Tube-U4G can be installed with TSM1+TSMB1
slanted or level surfaces, as well as various
TSM1, TSM-B1 are sold seperately.
< NOTE >
b
border, roof, or rear end of vehicle, as well as
TSM1, TSM-B1 are sold seperately.
< NOTE >