Zoom 1070 Series User manual

PCI EXPRESS MODEM
Quick Start
This Quick Start describes the PCI Express modem installation
for computers using Windows®Vista, XP, or 2000.
Before You Begin
Before you begin the installation, please make sure that you
have:
•The PCI Express modem card (model 3035)
•A telephone cord
•The software CD that came with your modem
•An available PCIe slot on your computer
If your computer already has an internal PCI modem
installed, you should remove that modem and its drivers to
avoid interference with your installation of the new modem.
Please refer to Removing a PCI Modem and Its Drivers on page
7.
Important Safety Measures
• To reduce the risk of fire, use the supplied phone cord or an AWG 26 or larger
UL-listed or CSA-certified phone cord.
• Do not use this product near water — for example, in a wet basement or next
to a swimming pool.
• Avoid using a telephone (other than a cordless phone) during an electrical
storm.
• Do not use the telephone to report a gas leak while you are in the vicinity of
the leak.
Additional regulatory and compliance information is included in the PCI
Express Modem User Guide, which is located on the product CD.

Installing the Drivers
Important!
Windows 2000 users: You must install the modem card before
installing the drivers. Please follow the steps listed in Installing
the Modem Card on page 3, then install the drivers.
Windows Vista and XP users: You must install the drivers before
installing the modem card. Please complete the following steps.
1Power on your computer and close all running applications.
2Insert the CD that came with your modem into your CD-ROM
drive. If the CD does not start automatically, double-click
Computer or My Computer on your desktop, then double-click
the icon for your CD or DVD drive.
Windows Vista: If the AutoPlay dialog opens, select Run
setup.exe. If the User Account Control dialog opens, click
Allow.
Windows XP: If a Windows logo testing disclaimer
appears, you can safely ignore it. Click Continue Anyway.
3On the Modem Installation window, click Install Modem Drivers.
Windows Vista: If a Windows Security dialog opens, click
Install.
Windows 2000: If a Digital Signature message appears,
you can safely ignore it and click Yes to continue.
The installation program automatically copies driver files to
your hard drive.
4On the Installation Wizard window, click OK to install the
NetWaiting™ Modem on Hold™ application, which lets you take
a phone call while online. See page 6for more information.
5On the Netwaiting Setup window, click Next and follow the
prompts. On the last window, you can select the checkboxes
or leave them unselected, then click Finish.
6On the Modem Installation window, click Exit.
7Remove the installation CD and shut down your computer.
2

Installing the Modem Card
Important!
Windows Vista and XP users: You must install the drivers before
installing the modem card. Please complete the steps listed in
Installing the Drivers on page 2, then install the modem card.
Windows 2000 users: You must install the modem card before
installing the drivers. Please complete the following steps, then
go to Installing the Drivers on page 2.
1Make sure that your computer is powered off, then unplug it.
2Remove the cover from your computer.
3On the back of your computer, unscrew and remove the
metal cover plate that lines up with an empty PCIe slot. Save
the screw.
CAUTION
Electrostatic Discharge Protection
Static electricity can damage modem components
or your computer. Before removing the modem
from its antistatic bag, touch the computer’s metal
chassis to statically discharge yourself.
4Remove the modem from its antistatic bag and record its
serial number.
5Slide the modem card firmly into the available PCIe slot.
PCIe slot
Metal cover plate
3

Be sure that the back end of the card (smaller gold finger
area) is properly seated into the connector. If you have a
tower or mini-tower computer case with a vertical main
board, lay the computer down on its side and push straight
down on the modem card to seat it firmly in its slot. Be sure
that the bracket is lined up properly, then screw the bracket
into the computer using the screw that you removed earlier.
CAUTION
Do not handle any internal modem card when a
phone line is plugged into it. The voltage present
when the line is ringing is potentially harmful.
6Replace the computer cover.
7Connect the telephone cord by plugging one end of the
telephone cord into the modem jack (near the LINE marking)
and the other end into a telephone jack (typically the wall
jack where you would normally connect a telephone).
If you do not use the supplied telecommunications cord, use
an equivalent (minimum AWG 26) line cord.
8Plug in your computer and power it on.
Windows XP: When the Found New Hardware Wizard dialog
box appears, click Next. If a Windows logo testing
disclaimer appears, you can safely ignore it. Click
Continue Anyway.
Windows 2000: If a Digital Signature message appears,
you can safely ignore it and click Yes.
Completing the Installation
1Windows Vista: Select Start >Control Panel > Phone and Modem
Options.
Windows XP and Windows 2000: Select Start > Settings >
Control Panel > Phone and Modem Options.
2If the Location Information dialog appears, type the required
information, then click OK or Close.
4

3On the Phone and Modem Options page, click the Modems tab,
select the new modem, then click the Properties button.
4On the Properties page, click the Diagnostics tab.
5On the Diagnostics page, click Query Modem. You will see a list
of AT commands and responses, indicating that your new
modem is properly connected.
6Click OK to close the Diagnostics page.
7On the Phone and Modem Options page, click OK to exit.
Congratulations! You have successfully installed your modem.
Important—If your PC had an existing modem or you are
creating a new connection, you must redirect your application
software so that it recognizes your new modem.
•America Online 9.x Users: On the AOL® Sign On screen,
select Connect Options. On the Connect Options screen, select
Advanced Settings, then click the Modems tab and verify that
your new modem is selected.
•Dial-up Networking Users:From your computer’s desktop,
double-click Computer or My Computer, then select the Network
icons and tasks that let you view, set up, and make a new
connection. Select your new modem and follow the prompts.
To connect to the Internet, you must have an ISP account.
Tip: If your modem is not working, first try turning off your
computer and restarting it. Sometimes this will help Windows
identify and activate the correct drivers.
Note: If you ever need to reinstall the operating system, you
must physically remove the PCI modem first. After reinstalling
the operating system, reinstall the modem by following the
instructions that begin on page 2of this Quick Start.
Installing the Communications Software
The product CD describes the communications software
included with your modem and provides an easy, point-and-click
installation. If necessary, consult the CD’s online help. Please
5

run the modem’s CD now. You should not install the drivers
again, but you can install any application software on the CD.
How to Use NetWaiting Modem-on-Hold
Your modem includes the NetWaiting Modem-on-Hold program.
Basic information on this software is included here. For more
details, please refer to the NetWaiting online help.
Note: Your Internet Service Provider must support the V.92
protocol for all the Modem-on-Hold features to work. Contact your
provider if you are unsure. You must have Call Waiting/Caller ID
(Type 2 Caller ID) service from your telephone company to use
the modem’s Call Waiting/Caller ID feature.
When you power on your computer after installing your modem
software and hardware, you will see the NetWaiting phone icon on
the screen. (If you do not see it, from the desktop go to Start >
Programs > NetWaiting, and select NetWaiting to display the icon.)
Tip: To avoid the need to reactivate Modem-On-Hold every time
you log on, right-click the NetWaiting icon and select Settings >
Launch at Windows startup.
If someone calls while you are online, the NetWaiting dialog
appears on your computer screen, offering three choices.
•Click the green OK icon to place your Internet connection on
hold and accept the call.
•Click the red Xicon to reject the call and remain connected
to the Internet.
6

•Click the yellow Disconnect icon to drop your Internet
connection and accept the call.
Note: The length of time that your modem can be on hold varies,
depending on your ISP.
Removing a PCI Modem and Its Drivers
You should follow these instructions if your computer already has
a PCI modem installed, and you want to replace it with your new
modem.
1From the desktop, open Control Panel, and then click Add or
Remove Programs. In the dialog that opens, select the modem
that you want to uninstall and click Remove. (Depending on
your operating system, some of these buttons may have
slightly different labels.)
2Follow the on-screen instructions and click Finish.
3In one of the subsequent dialogs (depending on your
operating system - Modems, Phone and Modem Options, or
Modem Properties), select the modem you want to uninstall
and click Remove.
4Close all applications, shut down, then unplug the computer.
5Remove the computer's cover, unplug any cords connected
to the modem card, remove the screw that is holding the
modem card in place, then slide the card out.
CAUTION
Do not handle any internal modem card when a
phone line is plugged into it. The voltage present
when the line is ringing is potentially harmful.
Regulatory Information
Electrostatic Discharge Statement
The unit may require resetting after a severe electrostatic discharge event
Declaration of Conformity
Declaration of Conformity Déclaration de conformité Konformitätserklärung
Δήλωση Συμμόρφωσης Dichiarazione di conformità Deklaracja zgodności
Declaración de conformidade Konformitetsdeklaration Uyum Beyanatı
Declaração de Conformidade
7

Manufacturer/Producent/Fabrikant/
Constructeur/Hersteller/Κατασκευαστής/
Fabbricante/Fabricante/Tillverkare/Üretici
Zoom Technologies, Inc.
207 South Street
Boston, MA 02111 USA
www.zoom.com
617-423-1072 (main office)
617-753-0962 (technical support)
Brand/Varemærke/Merk/Marque/Marke/
Μάρκα/Marchio/Marka/Marca/Märke/
Thương hiệu
Conexant/Zoom PCIe V.92 Modem
Type/Typ/Μάρκα/Tipo/Türü/Kiểu mẫu Zoom Series 1070
Zoom Model 3035
Conexant Model CX-9Z-NR0134
The manufacturer declares under sole responsibility that this equipment is compliant to
Directive 1999/5/EC via the following. This product is CE marked.
Producenten erklærer under eneansvar, at dette udstyr er i overensstemmelse med direktivet
1999/5/EC via følgende. Dette produkt er CE-mærket.
De fabrikant verklaart geheel onder eigen verantwoordelijkheid dat deze apparatuur voldoet
aan Richtlijn 1999/5/ EC op grond van het onderstaande. Dit product is voorzien van de CE-
markering.
Le constructeur déclare sous son entière responsabilité que ce matériel est conforme à la
Directive 1999/5/EC via les documents ci-dessous. Ce produit a reçu le marquage CE.
Hiermit erklärt Zoom die Übereinstimmung des Gerätes modem mit den grundlegenden
Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EC. Dieses
Produkt ist das gekennzeichnete CE.
Οκατασκευαστής δηλώνει με αποκλειστική του ευθύνη ότι αυτό το προϊόν συμμορφώνεται με
την Οδηγία 1999/5/ΕC μέσω των παρακάτω. Αυτό το προϊόν φέρει τη Σήμανση CE.
Il fornitore dichiara sotto la sola responsabilità che questa apparecchiatura è compliant a
1999/5/EC direttivo via quanto segue. Questo prodotto è CE contrassegnato.
Producent stwierdza że to urządzenie zostało wyprodukowane zgodnie z Dyrektywą
1999/5/EC. Jest to potwierdzone poprzez umieszczenie znaku CE na urządzeniu.
O fabricante declara sob sua exclusiva responsabilidade que este equipamento está em
conformidade com a Directiva 1999/5/EC através do seguinte. Este produto possui Marcação
CE.
El fabricante declara bajo su exclusiva responsabilidad que este equipo satisface la Directiva
1999/5/EC por medio de lo siguiente. Este producto tiene marca CE.
Bu ürünün imalatçısıtüm sorumluluk kendisinde olmak kaydıyla bu cihazın aşağıdaki tabloda
gösterilen biçimde 1999/5/EC (R&TTE Yönetmeliği) no.lu Yönetmeliğe uygun olduğunu beyan
etmektedir. Bu ürün CE İşareti taşımaktadır.
Nhà sản xuất cam kết với trách nhiệm của mình là thiết bịnày tuân theo Hướng dẫn 1999/5/EC
thông qua các mục sau. Sản phẩm này được đánh dấu là CE.
2006/95/EC - LVD EN 60950-1:2001/A11:2004
EMC/RF: 2004/108/EC EN 55024:1998/A1:2001/A2:2003
EN 55022:1998/A1:2000/A2:2003
Director, Hardware Engineering/Direktør, Hardware
Engineering/Director, Sustaining Engineering/Directeur, ingénierie
de soutien/Direktør, Sustaining Engineering/ Διευθυντής,
Μηχανικής Διατήρησης/Direttore, Hardware Engineering/Dyrektor,
Inżynieria ciągła/Director, Engenharia de Manutençã /Director,
Ingeniería de apoyo/Donanım Mühendisliği, Müdür/Giám Đốc Kỹ
thuậtn cứng
A. Pollock
06 January 2009
1070 TCF/TF
0069-B 27594 ©2009
Other manuals for 1070 Series
1
This manual suits for next models
1
Table of contents
Other Zoom Modem manuals