Alfa Network APS08 User manual

APS08
4+4 10/100M PoE Switch
The device is a powerful, high-performance Fast Ethernet Switch, with all 8 ports capable of 10 or 100Mbps
auto-negotiation operation (NWay), which means the switch could automatically negotiate with the connected
partners on the network speed and duplex mode. It is ideal for micro-segmenting large networks into smaller,
connected subnets for improved performance, enabling the bandwidth demanding multimedia and imaging
applications. Moreover, the 10/100Mbps auto-sensing ability provides an easy way to migrate 10Mbps to
100Mbps network with no pain.
This Switch supports PoE, which supplies power for connected devices via CAT 5 and above twisted cables.
By integrating the data transmitting cable and power cord, it eliminates the effort constructing your network.
You could easily connect a wirelessAP or a VoIP phone to this switch without looking outlets for them. Over
current protection and circuit shorting protection are also supported to ensure the safety
Features
zComplies with 10BASE-T specifications of the IEEE802.3 standard
zComplies with 100BASE-TX specifications of the IEEE802.3u standard
zCompliant with IEEE 802.3af PoE standard (DTE power via MDI-X)
zProvides 4 PoE ports with classification identify
zSupports 15.4W maximum per PoE port
zSupports over current protection and circuit shorting protection
z8 x RJ-45 ports for 100BASE-TX and 10BASE-T connectivity
zSupport Nway protocol for speed (10/100Mbps) and duplex mode (Half/Full) auto-detection
zStore-and-forward architecture filters fragment & CRC error packets
zSupport 1k MAC entries
z768K Bits buffer memory

Specifications
Standard IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3af
Power over Ethernet
IEEE802.3x flow control
Interface 8 x 10/100 Mbps auto
MDI/MDI-X RJ-45 ports
(port 1~4 support PoE power feeding)
Network Data Rate 10/100 Mbps
Auto-negotiation
Transmission Mode 10/100Mbps Full-duplex
Half-duplex
LED indications System: power
Ports: 10/100M , PoE
Memory 1k MAC entries
768k Bit buffer memory
Power Consumption 64.32W (max. with 4x15.4w PoE Device connected)
4.848W (max. with no PoE Device connected)
Operating Temperature 0°C ~40°C
Operating Humidity 10%-90% (non-condensing)