AlfaBot N1 User manual

Automatic Nut Milk Maker
N1
Room
Temp
Warm
140°F
Hot
212°F
Boil
Water
Keep
Warm
Self
Clean
Menu
Cancel
Delay
Start
Thanks for your purchase. Any questions please don’t hesitate to contact us, We will
handle all your problem ASAP. Your feedback is vital to us! And we will always try to do
better. For more details, please contact us by email [email protected](Write your
seller’s Order #on the subject of the email, so that we can find your order and better
assist your issue).
User Manual for AlfaBot N1

Safety Precautions
[email protected]
1
ln order to better understand and use this product, please read this
instructions carefully before use and follow the instructions.
1.Before use, please check whether the voltage you use is same as
the rated voltage on the product nameplate.
2.To protect against fire, electric shock, or injury, do not place the
cord, plug, or milk machine in water or other liquid.
3.Do not use the product on the surface of objects that are not
heat-resistant, such as carpets or plastics. Do not place some things
on top of this product.
4. When it works, do not touch the lid or steam to avoid scalding.
5.The water on the surface of the machine and the power cord must
be whipped off before turning on the power.
6. Do not move the product while working to avoid the liquid spilling.
7.Use the handle to carry or move the machine, as the surface may be
hot after use, and to avoid scalding from hot liquid.
8.Close supervision is necessary when this appliance is to be used by
or near children.
9.This machine must be operated on a flat surface away from the
edge of the counter to prevent accidental tipping.
10.Do not use the machine if it has been damaged or modified or ap-
pears to have malfunctioned in any way.
11.Do not operate the machine with a damaged or incorrect cord or
plug. lf the power cord or the product is damaged, in order not to take
the risk, you can contact us by email to solve the problem.
12.Do not allow the cord to hang over the edge of the table or count-
er, or contact any hot surfaces.
13. Do not operate dry to avoid interior damage and fire.
14.To disconnect, remove the plug from the outlet. Do not yank on the
cord as it may damage the cord and eventually cause an electric

[email protected]
2
shock.
15.To avoid an electrical overload, do not operate another high-watt-
age appliance on the same circuit.
16.Do not fill above the MAX line, it may cause liquid to overflow,
which may cause scalding.
17.Do not open the lid during operation unless necessary. It will stop
the function of the machine, which is not conducive to the long-term
use of the machine.
18.Do not place on or near a hot gas or electric burner or in a micro-
wave or heated oven.
19.To protect against fire, electric shock, or injury. Do not wash it with
a dishwasher.
20. Do not use for other than intended use. This appliance is intended
for HOUSEHOLD USE ONLY. Not for commercial or industrial use. Use
for anything other than intended will void the warranty.
21.After the work is completed, please wait for the motor and blade to
stop rotating and ensure the power supply is disconnected, then open
the lid of the cup and pour out the food.
22.The stirring blade is sharp, do not touch the stirring blade with
your hands during emptying the heating cup and cleaning.
23.During the working process of the product, it is strictly forbidden
for any objects to penetrate into the product and contact moving
parts such as blades and motors, so as to avoid injury or damage to
the product.
24.After continuous running twice, let the machine cool down for 30
min and use it again.
Note: lf it has any problems with this product, please contact us.
Non-professionals are strictly prohibited to disassemble the machine.

Operation panel
[email protected]
3
豆
Room
Temp
Warm
140°F
Hot
212°F
Boil
Water
Keep
Warm
Self
Clean
Menu
Cancel
Delay
Start
Room
Temp
Warm
140°F
Hot
212°F
Boil
Water
Keep
Warm
Self
Clean
Menu
Cancel
Delay
Start
6 Stainless Steel Blade
2 Sawtooth Blade
Milk Maker
Handle
Lid
LED Panel
Menu / Cancel
Delay Start
Product Parts

Product Name:
Brand and Model:
Voltage:
Rated Power:
Capacity:
Material:
Item Weight:
Item Size:
Nut Milk Maker x1
Charger x1
Cleaning Brush x1
Measuring spoon x1 (30ml)
Filter funnel x1
Instructionn Manual x1
Nut Milk Maker
AlfaBot N1
110V
600W
600ml
304 Stainless Steel
2.6 lb
10.2*6.7*4.5 inch
Instructions
Package Contents
[email protected]
4

Control Panel Overview
1.Room Temp(Only blend without heating)
1) When pressing the button "Menu" to choose "Room Temp", the light
"Room Temp" will change from flickering to always on.
2) When the light is "Room Temp" always on, the machine will start to
blend.The LED light display panel will enter a 5-minute countdown.
3) When the milk maker emits 10 beeps and the LED light display
panel showing"- -", the machine finishes working.
2.Warm 140F(Blend and heat to about 140°F)
1) When pressing the button "Menu" to choose "Warm 140°F", the
light "Warm140F" will change from flickering to always on.
2) When the light is "Warm 140°F" always on, the machine will start to
heat to about 140F.
3) When the temperature reaches about 140°F , the LED light will
enter a 5-mincountdown.And the machine will start to blend.
4) When the milk maker emits 10 beeps and the LED light display
panel showing"- -", the machine finishes working.
3.Hot 212F (Blend and heat to about 212°F)
1) When pressing the button“Menu" to choose "Hot 212°F", the light
"Hot 212°F" will change from flickering to always on.
2) When the light is "Hot 212°F" always on, the machine will start to
heat to about 212°F.
3 ) When the temperature reaches about 212°F. The LED light will
enter a 13-minute countdown. And the machine will start to blend and
keep heating. 4 ) When the milk maker emits 10 beeps and the LED
light display panel showing"- -", the machine finishes working.
4.Boil Water
1) When pressing the button "Menu" to choose "Boil Water", the light
"Boil Water"will change from flickering to always on.
2) When the light is "Boil Water" always on, the machine will start to
heat. When it is lefts 3min to boil, the LED light display panel will enter
a 3-minute countdown. 3) When the milk maker emits 10 beeps and
the LED light display panel showing"- -", the machine finishes work-
[email protected]
5

[email protected]
6
ing.
5.Keep Warm
1 ) When pressing the button "Menu" to choose "Keep Warm", the
light "Keep Warm" will change from flickering to always on.
2) When the light is "Keep Warm" always on, the machine will start to
keep the temperature at about 140F. The LED light will enter a
6-Hours countdown.
The keep-warm function maintains a constant temperature of about
140F , and the maximum working time is 6 hours.
3) When the milk maker emits 10 beeps and the LED light display
panel showing"- -", the machine finishes working.
6.Self Clean
1) When pressing the button "Menu" to choose "Self Clean", the light
"Self Clean"will change from flickering to always on.
2) When the light is "Self Clean" always on, the machine will start to
Stir to rinse the inside.The LED light display panel will enter a 1-minute
countdown.
3 ) When the milk maker emits 10 beeps and the LED light display
panel showing"- -", the machine finishes working. After using this
function, it is easier to clean with the included brush.
7.Delay Start
1) When pressing the "Delay Start" button, the LED panel will show
the1-Hourcountdown. Function "Room Temp" is selected by default.
Please press the"Menu" button to select the corresponding function if
you need to select other functions.
2)After finishing the function setting, press the button "Delay Start"
continuously to select the appointment time. The maximum delay
time can be up to 18 hours. 3)After the setup is complete, wait for 3
seconds. The LED display will enter a countdown for 1-18 Hours you
set. The selected function will automatically operate after the count-
down ends.
4) When the milk maker emits 10 beeps and the LED light display
panel showing"- -", the machine finishes working.

[email protected]
7
Room
Temp
Warm
140°F
Hot
212°F
Boil
Water
Keep
Warm
Self
Clean
Menu
Cancel
Delay
Start

Maintenance and Care
How to Care For the Product
1.While not in use, please unplug the power from the power outlet
in time.
2.Please store the machine away from water sources, and avoid
water entering the power cord socket so as to avoid leakage fail-
ure.
3.Please wipe the machine with a wet towel when the body is
dirty, but don't put it into the water for cleaning so as to avoid
power leakage and fault. Do not use any chemical or abrasive
powder cleaner to clean the outer surface of the machine.
4.Do not use the steel ball when cleaning. The liner can be cleaned
with the brush in the box.
5. lf the bottom of the machine is difficult to clean, you can soak it
in warm water first, then use a cleaning brush to brush in the same
direction then rinse with clean water.
6.The lid can be rinsed directly, not immersed in water.
7.You can add an appropriate amount of water to the cup and
press the "Menu"button to select the "self Clean" function to auto-
matically stir and clean.
[email protected]
8

Troubleshooting
[email protected]
9
Problem
Smell at first use
Liquid spill
E1
E2
E3
E5
E6
E7
E8
Food can not be
completel
ybroken down
1)Too much /too littleIngre
dients
2) lnsufficient water
1) Cancel the function and adjust the
proportion of Ingredients.
2) Please add more water below the
maximum water line.
Normal in Initial use
Too much water
Defective machine
(Sensor disconnection alarm)
Lid is not closed correctly
Heating element not working
Abnormal heating alarm
Motor overcurrent alarm
Not heating, the motor
does not work
Clean the machine and let it
cool down for half an hour
before using it.
Cancel the function and adjust
the proportion of food.
Unplug the power, then plug it
back in after 5 minutes.
Defective machine
(Sensor short circuit alarm) Contact us to solve it
Only Heat
without blend Circuit board damaged Contact us to solve it
Put the lid on correctly
Contact us to solve it
Contact us to solve it
We recommend boiling with
water and tea to release the
favor of the new product.
Please reduce water according
to the MAX line.
Possible Cause Possible Resolution