Morphy Richards 46718 User manual

Upon registration with Morphy Richards
(UK & ROI only)
FP46718 MUK Rev 2
* Register online for your 2 year guarantee. See back of this instruction book for details. (UK and Ireland customers only)
www.facebook.com/morphyrichardsuk
www.twitter.com/loveyourmorphy
www.homeofthehouseproud.com
For competitions, product hints and tips
and more join us at
*
46718
Multifunction Opener
46718 rev2_Layout 1 02/09/2011 12:13 Page 1

2
Features
(1) Grip & Grab Tool
(2) Cutting Release Button
(3) Cutting Assembly
(4) Cutting Lever
(5) Guide Pin
(6) Magnetic Lid Holder
(7) Geared Wheel
(8) Multi Tool
(9) Cord Storage
(10) Metal Cap Bottle Opener
(11) Twist Cap Bottle Opener
(12) Ring Pull Can Opener
(13) Cutting Blade
(For plastic packaging)
1
2
4
5
67
8
9
10
11
12 13
3
9
1
2
3
4
01
11
5
67
2131
8
Product overview
46718 rev2_Layout 1 02/09/2011 12:13 Page 2

3
4
Lower the opening mechanism into place,
pressing down on the Cutting Lever (4). The
Magnetic Lid Holder (6) will connect to the lid
and the multifunction opener will start
automatically.
3
Move the unopened can into place. Position
the rim of the can below the Guide Pin (5) and
on top of the Geared Wheel (7).
22
Raise the Magnetic Lid Holder (6) up and lift
the Cutting Lever (4).
5
When the can has stopped moving, hold the
opened can and lift the Cutting Lever to
release the can.
Using your multifunction opener
1
Plug the multifunction opener into a mains
outlet.
•The motor will automatically stop when the can is
open.
•It is not necessary to hold the lever down or hold
the can while it is being opened.
•If there is a bump, dent, or heavy seam in the rim
of the can, open the other end of the can or start
the cutter just beyond it.
•The motor of the can opener is permanently
lubricated and will require no oiling.
Notes:
46718 rev2_Layout 1 02/09/2011 12:13 Page 3

4
Multi Tool: Twist Cap Bottle Opener
(for plastic bottles)
Multi Tool: Cutting Blade
(for plastic blister packaging)
Multi Tool: Metal Cap Bottle Opener
Multi Tool: Ring Pull Can Opener
Grip & Grab Tool
(fits multiple jar sizes)
MULTI TOOL CONTAINS A SHARP BLADE.
USE CARE WHEN HOLDING OR HANDLING
THE MULTI TOOL.
WARNING: ELECTRICAL SHOCK HAZARD
DO NOT IMMERSE THE MULTIFUNCTION
OPENER BODY OR CORD IN WATER OR ANY
OTHER LIQUID.
•To avoid damaging your can opener, do not use
abrasive cleaners or scouring pads.
WARNING Care & cleaning
Using your Grip & Grab Tool
and Multi Tool
46718 rev2_Layout 1 02/09/2011 12:13 Page 4

5
4
Clean the Multi Tool (8) and Grip & Grab Tool
(1) with a damp cloth.
3
Clean the Cutting Assembly with warm soapy
water.
2
Slide the Cutting Release Button (2) and remove
the Cutting Assembly (3) from the Main Unit.
1
Unplug the multifunction opener from the
mains.
6
Align the alignment arrows on the Cutting
Assembly (3) and Main Unit.
5
Clean the main unit with a damp cloth.
DO NOT IMMERSE IN WATER
7
Slide the Cutting Release Button (2) and
replace the Cutting Assembly into the main unit.
8
Replace the Mutli Tool (1) and Grip & Grab Tool
(8) onto the main unit for storage.
Cleaning your multifunction
opener
46718 rev2_Layout 1 02/09/2011 12:14 Page 5