ALGE-Timing Timy User manual

E-05-09-12
Timy
Program
Stopwatch

Stopwatch
Page 2
Table of Content
1Keypad and implementing........................................................................................................ 3
2Explanation display indication................................................................................................. 3
2.1 Start display (1) ........................................................................................................................... 3
2.2 Finish display (2) ......................................................................................................................... 3
2.3 Times list (3)................................................................................................................................4
2.4 Info sign....................................................................................................................................... 4
2.5 Functions for times list................................................................................................................. 4
2.6 Buffer Memo................................................................................................................................5
2.6.1 Disqualifying ............................................................................................................................ 5
2.6.2 Focus....................................................................................................................................... 5
2.6.3 Next screen menu ................................................................................................................... 6
2.7 Editing of the start times.............................................................................................................. 6
2.8 Editing of the finish times............................................................................................................. 6
2.9 Editing of the run time.................................................................................................................. 7
3Change heat (run)...................................................................................................................... 7
3.1 Change run by switching-off/on................................................................................................... 7
3.2 Change run in the menu.............................................................................................................. 8
3.2.1 According to start number ....................................................................................................... 8
3.2.2 According to Bibo .................................................................................................................... 8
3.2.3 Show run time and total time................................................................................................... 8
Technical changes reserved in sense of improvement!
ALGE Timy manual cobyright by:
ALGE-Timing GmbH & Co
Rotkreuzstraße 39
A-6890 Lustenau
www.alge-timing.com
Tel.: 0043 / 5577 / 85966
Fax: 0043 / 5577 / 85966-4

Stopwatch
1 Keypad and implementing
Please see manual TIMY GENERAL
2 Explanation display indication
Here you can find a short description of the most important display indications:
2.1 Start display (1)
In this field (1) you can indicate start numbers from 1 up to 9999. If you indicate a new start
number, confirm it with the green “OK”-button.
The start number automatic is also visible on the display.
Arrow upward Start number hasn’t started yet, start automatic counts upwards
Arrow downward Start number hasn’t started yet, start automatic counts downwards
u Start number is started
blank Start number hasn’t started yet, start automatic off
2.2 Finish display (2)
Input of the start numbers (1 – 9999) which get through the finish line and competitors resp.
intermediate and finish times. If you indicate 0, the display shows the daytime. Please
confirm the start numbers always with the RED “OK”-button.
Page 3

Stopwatch
Page 4
2.3 Times list (3)
Every started competitor will be showed in chronological order with info signs (next point),
start number, timing channel (only print) and time.
LZ Run time
LZM Run time with red „OK“-button
C2-C5 Intermediate time channel with a precision up to 1/10000
C6-C8 Intermediate time channel with a precision of max. 1/100
2.4 Info sign
The info sign is always the first sign in one line. If a competitor is disqualified, then his time
will be cleared in the times list and and marked on the printout.
blank valid time
c times cleared with „CLR“-button
i manually changed time
d disqualified competitor
2.5 Functions for times list
If you press one of these three buttons, then the last
stopped time will stand on the top position of the times list.
If you press these two buttons, the time of the first started
competitor will be showed.
If you press these two buttons, the time of the last started
competitor will be showed.
Times list will be set forward for one start number
Times list will be set back for one start number

Stopwatch
2.6 Buffer Memo
Mostly used if many competitors reach the finish at the same time and if there is not enough
time to indicate every single start number. The incoming times will be listed sequentially,
afterwards you can add the appropriate start numbers.
By pushing the button you will enter and leave the Memo mode. The Memo times will
be marked with a litte “m”. The start number of the second line blinks. Enter the right start
number and confirm it with one of the “OK”-buttons.
If several competitor reached the finish at the same time (ex equo), then please act as
follows:
 Indicate one of the right start numbers at the blinking one and press button
(Copy).
 The time will maintain in the Memo window and you can add the next start number.
 At the last competitor who will get the last time, press instead of “Copy” the “OK”-
button, so the time will be cleard of the Memo window.
 If one time is still left which will not be required, you can clear it with button .
You can leave the Memo window at any time and handle the left times at a later point.
2.6.1 Disqualifying
 Press button
 Add start number of the start number of the competitor who shall be disqualified
 Confirm with button or with one of the „OK“-buttons or cancel with button .
 Competitor will be cleared in the times list (3) and marked on the printout.
2.6.2 Focus
Press button . Now you can see in the top line of the times list always the last stopped
time. Please notice that thus the times list will be removed.
By pressing one if the button you will inactivate the focus function.
Page 5

Stopwatch
Page 6
2.6.3 Next screen menu
By pressing the button you will enter the next menu. Here the function buttons are
occupied as following:
Start Editing the start times
Finish Editing the finish times
RT Editieren the run time
->->-> back to last screen menu
2.7 Editing of the start times
Press button (Start). As start time to change, it will automatically recommend the start
number of the start display. This start number blinks and can be overwritten. Add start
number of which you would like to change the start time and confirm with one of the two
“OK”-buttons or with .
With button , you can leave the menu without editing the start time.
All start times of the start numbers will be showed. The at the moment valid start time is
marked with an arrow at the end.
You can choose the new start time with the buttons and and confirm with button
. If you would like to copy the start time to another competitor, press button .
2.8 Editing of the finish times
Press button (Finish). As finish time to change, it will automatically recommend the start
number of the finish display. The start number blinks and can be overwritten. Add start
number of which you would like to change the finish time and confirm with one of the two
“OK”-buttons or with .
With button , you can leave the menu without editing the finish time.
All finish times of the start number will be showed. The at the moment valid finish time is
marked with an arrow at the end.
You can choose the new finish time with the buttons and and confirm with the
button . If you would like to copy the finish time to another competitor, press button
.

Stopwatch
2.9 Editing of the run time
Press button (run time). As run time to change, it will automatically recommend the start
number of the run time display. The start number blinks and can be overwritten. Add start
number of which you would like to change the run time and confirm with one of the two “OK”-
buttons or with .
With button , you can leave the menu without editing the run time.
All run times of the start number will be showed. The at the moment valid run time is marked
with an arrow at the end.
You can choose the new run time with the buttons and and confirm with the
button . If you would like to copy the run time to another competitor, press button .
3 Change heat (run)
You can make up to 256 runs. In every run, the total time of the previous runs as well as the
actual run is stored.
There are two possibilities to get to the next run:
 Switch-off the Timy and on again.
 In the menu at „general“, „change run“
If one run was already changed, the printout will look like this:
Start time of start number 2
Finish time
Run time
Stored time
Total time
3.1 Change run by switching-off/on
Advantage: at a long break, the batteries will be spared. If the Timy is synchronized with
other devices, it may lead to time differences, if not all devices are synchronized newly.
Disadvantage: the Timy and other timing devices must be newly synchronized.
Attention!! At switching-on the Timy, dont’ clear the times but save them.
Page 7

Stopwatch
Page 8
3.2 Change run in the menu
Advantage: you don’t have to synchronize the device newly
Disadvantage: at long waiting times between the runs, the battery resp. the accu are
needlessy bonded. The difference of the synchronized devices is also getting bigger.
If you have choosed one of the two options, go on like following:
 Choose run „same/next“
 At choice „next“, after start number or Bibo
3.2.1 According to start number
The start order of the first run can be adjusted in the menu ( upward counting, manually or
downward counting ).
3.2.2 According to Bibo
The start order is for the whole field carried out by Bibo. The quantity of the competitors to
reverse must be indicated and confirmed with one of the „OK“-buttons.
The Timy is now ready for the next run.
3.2.3 Show run time and total time
If the next run has already started, you can choose between run time (time counts from zero)
or the total time (time counts from the last stopped time).
In order to make this adjustment press as long at the button until you can see at the
left side below „LZ/tz“.