Alien ALR-M702-FCC Quick setup guide

ALIEN TECHNOLOGY®
ALR-M702-FCC
OEM Integration
Guide
August 2019
ALR-M702-FCC

Legal Notices
Copyright ©2019 Alien Technology, LLC. All rights reserved.
Alien Technology, LLC and/or its affiliated companies have intellectual property rights relating to technology embodied in the
products described in this document, including without limitation certain patents or patent pending applications in the U.S. or other
countries.
This document and the products to which it pertains are distributed under licenses restricting their use, copying, distribution and
decompilation. No part of this product documentation may be reproduced in any form or by any means without the prior written
consent of Alien Technology, LLC and its licensors, if any. Third party software is copyrighted and licensed from Licensors. Alien,
Alien Technology, the Alien logo, Nanoblock, FSA, Gen2Ready, Squiggle, the Squiggle logo, Nanoscanner and other graphics,
logos, and service names used in this document are trademarks of Alien Technology, LLC and/or its affiliated companies in the U.S.
and other countries. All other trademarks are the property of their respective owners. U.S. Government approval required when
exporting the product described in this documentation.
Federal Acquisitions: Commercial Software -- Government Users Subject to Standard License Terms and Conditions. U.S.
Government: If this Software is being acquired by or on behalf of the U.S. Government or by a U.S. Government prime contractor or
subcontractor (at any tier), then the Government's rights in the Software and accompanying documentation shall be only as set forth
in this license; this is in accordance with 48 C.F.R. 227.7201 through 227.7202-4 (for Department of Defense (DoD) acquisitions)
and with 48 C.F.R. 2.101 and 12.212 (for non-DoD acquisitions).
DOCUMENTATION IS PROVIDED “AS IS” AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND
WARANTEES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
NON-INFRINGMENT ARE HEREBY DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE
LEGALLY INVALID.
FCC Compliance
This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with instruction manual, may cause harmful interference with radio
communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver
- Connect the equipment to a different outlet than that to which the receiver is connected
- Consult the dealer or an experienced radio communications technician
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Any change or modification to this product voids the user’s authority to operate per FCC Part 15 Subpart A. Section 15.21
regulations.
Caution
To comply with RF exposure requirements, a minimum separation distance of 20 cm must be maintained between the user’s body
and the device, including the antenna. This device is designed and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. Use only the antenna
defined in the integration guide.

Industry Canada Compliance
Avertissement: Tout changement ou toute modification non expressément approuvé par les reponsables de la conformité (Alien
Technology, LLCC, 845 Embedded Way, San Jose, CA 95138, Tél: 1.408.782.3900) peut faire perdre a l’utilisatuer son droit
d’utiliser l’equipement
CAN ICES-3(B) / NMB-3(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-3(B) / NMB-3(B)
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
Caution
To comply with RF exposure requirements, a minimum separation distance of 18.28 cm must be maintained between the user’s
body and the device, including the antenna. This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by RSS-102. Use only the antenna defined in the integration guide.
Mise en garde
Pour se conformer aux exigences en matière d’exposition aux radiofréquences, une distance minimale de 18.28 cm doit être
respectée entre le corps de l’utilisateur et le périphérique, y compris l’antenne. Cet appareil est conçu et fabriqué pour ne pas
dépasser les limites d'émission définies pour l'exposition au radiofréquence (RF) définie par RSS-102. Utilisez uniquement l’antenne
définie dans le guide d’intégration.

TABLE OF CONTENTS
ALR-H450 USER GUIDE
DOC. CONTROL #8102146-000 REV E
i
Alien Technology®
User Integration Guide
ALR-M702-FCC Module
Table of Contents
CHAPTER 1 INTRODUCTION ........................................................................................................ 1
1.1 About this Manual ....................................................................................................................... 1
1.2 Device Specifications ................................................................................................................................. 1
CHAPTER 2 INTEGRATION GUIDE ................................................................................................ 2
2.1 General ........................................................................................................................................ 2
2.2 Applicable FCC Rules ................................................................................................................. 2
2.3 Operational Use Conditions ........................................................................................................ 2
2.5 Trace Antenna Design ................................................................................................................. 2
2.6 RF Exposure Considerations ...................................................................................................... 2
2.7 Antennas ..................................................................................................................................... 2
2.8 Label and Compliance Information ............................................................................................. 3
2.9 Information on Test Modes and Additional Testing Requirements .............................................. 3
2.10 Part B Disclaimer ........................................................................................................................ 3

CHAPTER 1 INTRODUCTION
ALR-M702-FCC USER AND INTEGRATION GUIDE
DOC. CONTROL #TBD REV A
1
Chapter 1
Introduction
1.1 About this Manual
This manual provides you with safety information, technical support information, and sources for
additional product information.
Who should read this manual?
This manual is written for the person who is responsible for integrating the ALR-M702-FCC
module into host equipment. This manual provides you with information about the features of the
ALR-M702-FCC and how to integrate, configure, operate, and maintain it.
Before you operate your ALR-M702-FCC, please read through and become familiar with the
contents of this manual.
Introduction
The ALR-M702-FCC is a limited certification module for use in Alien developed products. It is
not for sale to outside companies and this manual is considered a confidential manufacturing
document per KDB 996369 D03 OEM Manual v01. The module is a compact RFID EPC Gen 2
reader. Only the BRA-40U antenna may be used with this module.
1.2 Device Specifications
ALR-M702-FCC Characteristics
Dimensions 56x36x7.5 mm
Weight <25 grams
RF Interface MMCX-50KE
Power and Control 12 Pin ZIF Ribbon Cable Connector
Operating Temp. -20℃ to +55℃
RFID (UHF) UHF 902-928MHz,
EPC Class1 Gen2 / ISO18000-6C
Input Voltage/Current 3.3 VDC (min) @ 2.9 ADC (max)
5.5 VDC (max) @ 1.1 ADC (typ)
Frequency of Operation 902 – 928 MHz
FHSS Parameters 50 channels, 500 kHz spacing, 400 mS hop time
Approved Antennas Alien version of BRA-40U
RF Output Power 0.975 watts
Control Line Voltage 0 – 3.3 VDC

CHAPTER 2 INTEGRATION GUIDE
ALR-M702-FCC USER AND INTEGRATION GUIDE
DOC. CONTROL #TBD REV A
2
Chapter 2
Integration Guide
2.1 General
The ALR-M702-FCC module is intended solely for use in Alien Technology RFID
subsystems to be attached to handheld data terminals. It is an RFID reader
module and operates in the 902 – 928 MHz unlicensed spectrum.
2.2 Applicable FCC Rules
Part 15.247
2.3 Operational Use Conditions
2.3.1 Antennas
The ALR-M702-FCC was verified with the Alien version of the BRA-40U
antenna designed for handheld data terminal operation. Only this
antenna may be used with the module. The module includes a unique
connector (MMCX-50KE).
2.3.2 Input Voltage Range
3.3 – 5.5 VDC
2.3.3 Digital Signal Interface
0 – 3.3 VDC
2.4 Limited Module Procedures
The ALR-M702-FCC module meets all requirements for modular certification.
However, it will only be used in Alien Technology products. This module is not
intended for sale to 3rd parties and per KDB 996369 D03 OEM Manual v01.
2.5 Trace Antenna Design
Not Applicable
2.6 RF Exposure Considerations
To comply with RF exposure requirements, a minimum separation distance of
20cm must be maintained between the user’s body and the device, including the
antenna. This device is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. Use only the antenna
specified in the integration guide.
2.7 Antennas
The ALR-M702-FCC was verified with the Alien version of the BRA-40U antenna
designed for handheld data terminal operation. Only this antenna may be used
with the module.

CHAPTER 2 INTEGRATION GUIDE
ALR-M702-FCC USER AND INTEGRATION GUIDE
DOC. CONTROL #TBD REV A
3
2.8 Label and Compliance Information
2.8.1 Products Sold in the US
Products including the ALR-M702-FCC must include a physical or e-
label stating “Contains FCC ID P65ALRM702” in accordance with
“Guidelines for Labeling and User Information for RF Devices – KDB
Publication 784748”.
2.8.2 Products Sold in Canada
Products including the ALR-M702-FCC must include a physical or e-
label stating “Contains IC 4370A-ALRM702” in accordance with
“Certification of Radio Apparatus RSS-102” paragraph 3.2.
2.9 Information on Test Modes and Additional Testing Requirements
2.9.1 The host manufacturer must perform Part 15 Subpart B testing of the
integrated assembly
2.9.2 Where other transmitters are included, the manufacturer must perform
colocation testing of the integrated.
2.9.3 Where integration cannot maintain the required 20 cm separation
additional RF exposure evaluation will be required.
2.9.3 Alien Technology provides a development board and SW that can be
used to control the module frequency and power.
2.9.4 Alien Technology creates specialized versions of engineering test
software as required for specific hosts.
2.10 Part B Disclaimer
The ALR-M702-FCC FCC ID is only authorized by the FCC for the rules listed on
the grant. The host manufacturer (Alien Technology) is responsible for
compliance with any other FCC rules that apply to the host not covered by the
modular certification.

CHAPTER 2 INTEGRATION GUIDE
ALR-M702-FCC USER AND INTEGRATION GUIDE
DOC. CONTROL #TBD REV A
4
Revision History
ECO # Revision Date: Originator: Description of Change:
TBD A 8/8/19 J. Hattick Initial release
Table of contents
Other Alien RFID System manuals
Popular RFID System manuals by other brands

RHOMBUS
RHOMBUS DR20 user manual

MCS ELECTRONICS
MCS ELECTRONICS BASCOM-AVR EM4095 RFID Reader user manual

Feig Electronic
Feig Electronic OBID i-scan HF ID ISC.ANT1300/680-GPC Installation

Metra Electronics
Metra Electronics 114 Technical manual

Siemens
Siemens SIMATIC Ident RF360M operating instructions

Avid Technology
Avid Technology MiniTracker 3-B user manual