DJ-190
EdAMVCO
4
FEATURES
n
OPTIONAL ACCESSORIES
0
Large, illuminated display
0
CTCSS encoder (50 tones) equipped
0
Time-Out-Timer equipped
0
40 memory channels, each memory channel stores frequency, offset,
shift-direction, CTCSS setting, CTCSS frequency, power
H/L,
scan-skip, battery-save (On/Off).
0
Scan functions
0
Battery save function (BS)
0
Auto Power Off with Morse alert before turn off.
0
1.5W
transmit output, 5W with optional Ni-Cd battery-pack EBP-36N.
0
Cable cloning function
0
DC.
In Jack for external power source
l
Monitor key
0
Tone burst
1750Hz
emission can be set.
0
2-colour
LED indicator: Green for RX/Red for TX
EJ-28U
EBP-33N
EBP-34N
EBP-35N
EBP-36N
EBP-37N
EDH-16
EDG36
EDG37
EDGGO
EDG61
EDG63
EDG64
EMS-9
EME-12
EME-13
EME-6
ESG26
ESG29
ESG30
EBG6
ERW-4
SC-400
CTCSS Decoder Unit
(4.8V
DC 650mAH) Ni-Cd battery
(4.8V
DC
1200mAH)
Ni-Cd battery
(7.2V
DC
9OOmAH)
Ni-Cd battery
(9.6V
DC 650mAH) Ni-Cd battery
(4.8V
DC 700mAH) Ni-Cd battery (standard)
Dry-cell battery case (AA x4)
Mobile Cigarette lighter adapter with active noise filter
External DC supply cable
(120V AC) Rapid charger
(220V AC) Rapid charger
(120V AC) Wall charger
(220V AC) Wall charger
Speaker microphone
Headset with VOX
Earphone and mic with VOX
Earphone
Softcase
(for use with EBP-33N)
Softcase
(for use with EBP-37N)
Softcase (for use with EBP&IN/35N136N)
Mobile bracket
(for commercial version only) PC Programming cable
(for commercial version only) Scrambler
Frequency Coverage
DJ-190T
(U.S.
Amateur version)
DJ-190E
(European
Amateur version)
DJ-19OTA
(commercid
vetsion)
DJ-19OTA2
(Commercial
version)
Channel Step:
Memory Channels:
Antenna Impedance:
Frequency Stability:
Microphone Input Impedance:
Signal Type:
Offset Range:
Deviation:
TX Output (supply voltage):
RX Sensitivity:
RX Selectivity:
I.F.:
Power Supply Requirements:
Current Consumption
at
13.8V
DC:
Operating Temperature:
Dimensions:
(with EBP-37N without projections)
Weight:
Subaudible Tones (CTCSS):
TX
RX
144.000-
147.995MHz
135.000-
173.995MHz
144.000-145.995MHz
144.000-145.995MHz
135.000-
155.000MHz
135.000-
173.995MHz
150.000-174.000MHz
135.000-
173.995MHz
5, 10, 12.5, 15, 20, 25,
3OkHz
steps
40 Channels
5OQ
unbalanced
+5
ppm
2k62
nominal.
F3E (FM)
0
-
99.995MHz
2
5kHz max.
1.5W
(4.8v) I
3.5W
(7.2v) I 5W
(9.6V)
12dB
SINAD
better than
-
16dBp
-6dB I
f
12kHz
(1st)
21.25MHz
I
(2nd) 450kHz
4.8
-
13.8V
DC
(4.8V
DC standard)
Transmitting: Approx. 1.5 Amp. in High Power
Setting
Receiving: Squelched Approx. 24mA (BS on)
-lo-
+6O”C,
14-14O’=F
57(W) x 151 (H)
x
27(D) mm
2’/4(W) x 6(H) x
1*/16(D)
inches
Approx.
3009
Encoder installed (50 tones)
%pecifications
are subject to change without notice or obligation.
0EDC60 Rapid Charger
(12OV)
l
EDC-61 Rapid Charger
(22Ov)
0EME-12 Head-set with VOX
l
EBP-36N
Ni-Cd Battery Pack
9.6V DC 650mA for 5W output
. EJ-26U
CTCSS Decoder Unit
*Names of products mentioned in this catalog are used for identification
purposes only and may be trade mark and/or registered trademarks of their
respective company.
Authorized Dealer:
ALINCO, INC.
Head office: “TWIN 21” MID Tower
SuitdIng
23F
1-61, P-Chome,
Shiromi,
Chuo-ku,
Osaka 540-8580 Japan
Phone: 06-946-8150 Fax. 06-946-8175 Telex, 63086
U.S.A.: 438 Amapola
Ave
,
Suite
130, Torrance, CA 90501-6201 U.S.A.
Phone: 31 O-61 8-8616 Fax 31 O-61 8-8758
hnp://www.alwxo coml
Germany: Eschborner Landstrasse
55,60489
Frankiwi am Main, Germany
Phone: 069-786018 Fax: 069-789-60766
Copylight
D
1995
Alinco International Ltd.
Pnnfed in Japan
190~1E19508