Allegion Schlage Ease S1 Instruction Manual

Schlage EaseTM
Frequently Asked Questions
App Usage
Q
A
What do I do if I lose or change my mobile phone?
In order to regain access to your lock, all you need to do is login into your
Schlage Abode app account, from another mobile phone.
Q
A
What is the One-Touch Unlock function?
Aer pairing the lock with your phone, this feature allows you to unlock your lock
upon arrival with one touch of the keypad. This uses a combination of GPS,
Bluetooth and the Schlage Abode app, to automatically detect your proximity to
the lock and allow you to unlock your lock.
Q
A
How do I turn on the One-Touch Unlock function?
Aer pairing the lock with your phone, this feature can be set up from
the lock settings screen.
Q
A
I cannot find my Schlage Ease™ lock via the Schlage Abode app.
Ensure your Bluetooth is switched on within your mobile phone, you are in close
vicinity to your lock (within Bluetooth range) and lastly touch your lock keypad
before searching.
Q
A
How many users can I share a Bluetooth key with?
Unlimited! But a new Bluetooth key must be created per user.
Q
A
What is the expiry period of the Bluetooth key link aer I share it?
30 minutes aer generation of the link.
Q
A
What if my Bluetooth key link expires?
Create a new link and share again. The Bluetooth key link is only valid for
30 minutes aer generation.

Schlage EaseTM
Frequently Asked Questions
Features
Q
A
How do I add/enrol user PIN codes?
Through the programming mode (refer to the Schlage Ease™ Quick Start
Guide) or the Schlage Abode app (via Bluetooth). We strongly recommend
you use the Schlage Abode app for a greater user experience.
PIN codes can be added/enrolled remotely if you have the Schlage Wi-Fi
Bridge (AB100).
Q
Q
Q
Q
Q
A
A
A
A
A
What is the fake PIN feature?
What is the maximum storage for PIN codes?
How many digits can my PIN code contain?
How do I delete user PIN codes?
How do I change the master PIN code?
It is a visual protection for your PIN. It allows the user to prevent unwanted
exposure of the PIN. You can enter any random digits before and aer the
programmed master PIN or user PIN. Simply enter random digits before and/
or aer your PIN to a maximum of 20 digits.
20 user PIN codes and 1 master PIN code.
The PIN code should be between 4-10 digits.
Through the programming mode (refer to the Schlage Ease™ Quick Start
Guide) or the Schlage Abode app (via Bluetooth). We strongly recommend
you use the Schlage Abode app for a greater user experience.
PIN codes can be deleted remotely if you have the Schlage Wi-Fi Bridge
(AB100).
Through the programming mode (refer to the Schlage Ease™ Quick Start
Guide) or the Schlage Abode app (via Bluetooth). We strongly recommend
you use the Schlage Abode app for a greater user experience.

Q
Q
Q
Q
Q
Q
A
A
A
A
A
A
How do I check the status of my lock?
How do I pair my Schlage Ease™ lock with the Schlage Abode app?
What batteries can I use in my Schlage Ease™ lock?
How do I enable Away Mode?
What is the battery life of batteries when used in the Schlage Ease™ lock?
How do I restore my Schlage Ease™ lock to factory default settings?
Locked/unlocked status could be checked by observing the thumb turn
on the back escutcheon. Vertical means it is unlocked, the horizontal posi-
tion means it is locked. Or via the Schlage Abode app when you are within
Bluetooth range, or if you are remote you will need the Schlage Wi-Fi Bridge
(AB100), to use the Schlage Abode app.
Once logged into the Schlage Abode app, on the home page of the Schlage
Abode app, tap on the + (plus) symbol and follow the on-screen prompts.
AA alkaline batteries should be used. Do not mix used and new batteries.
It is not recommended to use rechargeable AA batteries.
Through the programming mode (Schlage Ease™ Quick Start Guide) or the
Schlage Abode app (via Bluetooth). We strongly recommend you use the
Schlage Abode app for a greater user experience.
Lifetimes of battery are dependent on how you use and set up your lock. Key
factors are the use of Bluetooth or Wi-Fi, use of optional functions/features
and frequency of use. Standard usage, if you unlock and re-lock your door up
to 10 times per day, the batteries should last for 9-12 months.
Please follow the steps below to reset:
1. Open the door and leave the door ajar.
2. Open battery case and find the reset button (as pictured in the
Schlage Ease™ Quick Start Guide).
3. Use a pointed item such as a paper clip or thumbtack to press
and hold the reset button.
4. Keep holding the reset button until you hear a beep.
Schlage EaseTM
Frequently Asked Questions

Schlage EaseTM
Frequently Asked Questions
Q
Q
Q
Q
A
A
A
A
How to change the sound of my Schlage Ease™ lock?
What does Power Saver ‘enable’ and ‘disable’ mean in the Schlage
Abode app?
Which type of key should I use if I need more keys for my Schlage
Ease™ lock?
Will the Schlage Ease™ lock be unpaired with my app if someone restored
my lock to factory settings?
The Schlage Ease allows you to mute the tones in the programming mode
(refer to the Schlage Ease™ Quick Start Guide) or the Schlage Abode app
(via Bluetooth). We strongly recommend you use the Schlage Abode app
for a greater user experience.
Power Saver enabled means Bluetooth will actively work and is always ready
to connect with the Schlage Abode app. Power Saver disabled means
Bluetooth will deactivate aer a short period aer the keypad light is off.
It will reactivate once you activate your lock screen by touching the keypad.
This depends on the Schlage Ease™ model (S1 or S2). The keyway will either
be a C5 or a GR9. You can check this with the item number located on your
receipt or box packaging. If you cannot find this, please contact your retailer
or Schlage Ease™ supplier.
No, the unpairing process can only be completed in the admin screen of the
Schlage Abode app, by the administration account holder. Simply reconnect
your Schlage Abode app to your Schlage Ease™ lock, to regain access if
the lock has had a factory reset.

Installation
Q
A
Is my door suitable for installation?
The Schlage Ease™ S1 & S2 models can be installed on wooden doors which
have a door thickness of 35-50mm. Please refer to our packaging for door
preparation and check if your door contains any hole preparation before pur-
chasing the Schlage Ease™ lock.
Q
Q
Q
Q
Q
A
A
A
A
A
Do I need to drill holes in my door?
What tools will I need to install the Schlage Ease™ lock?
Can I keep my existing mechanical deadbolt as well as a Schlage
Ease™ deadbolt?
Is the backset adjustable on my Schlage Ease™ lock?
What if I have lost some components within the screw pack?
If you are retrofitting/replacing an existing lock, ensure your existing hole is
a 54mm hole. If so, no additional holes are required. An optional 10mm hole
can be drilled for the optional fixing post for added stability.
For new door installation, you will need to drill a 54mm hole, an optional 10mm
fixing hole, along with the hole preparation for the latch/bolt. Refer to our hole
preparation guide included in the packaging of the Schlage Ease™ lock.
To retrofit/replace an existing lock, once the old lock has been removed all you
need is a #2 Philips head screwdriver. For the optional fixing post, you will need a
3/8” (10mm) drill bit.
For new doors without holes, you will need a 2-1/8” (54mm) hole saw, 1” (26mm)
Spade bit, 7/64” (2.5mm) drill bit, 3/8” (10mm) drill bit, chisel and hammer.
No, most mechanical deadbolts are not compatible with the Schlage Ease™
deadbolt, it may cause your lock to malfunction. Once you have installed a
keyless lock, you should remove mechanical deadbolts to avoid being locked
out of your property.
Yes, the backset can be changed between 60mm (2-3/8”) and 70mm (2-3/4”).
Please contact the retailer where you bought the product from or contact
Allegion for support.
Schlage EaseTM
Frequently Asked Questions

Schlage EaseTM
Frequently Asked Questions
Q
Q
Q
A
A
A
What environmental conditions will the Schlage Ease™ operate within?
Is my Schlage Ease™ lock waterproof?
How can I change the handing of my Schlage Ease™ lock?
Based on test results, our product works in a temperature range from -30oC
to 60oC. We do not recommend installing the Schlage Ease™ S1, S1 Keyless
and S2 series in high humidity environments.
IP rating of the external escutcheon is weather resistant to an IP rating of
IP55.The interior assembly should not be exposed to rain and weather.
This product is not suitable for external gates or fully exposed outdoor use.
Schlage Ease™ S1 Series: At installation, when the lock is first powered,
handing will be automatic. If it has not automatically handed or you require
to re-hand it, simply factory reset the lock to repeat this process.
For Schlage Ease™ S2 Smart Entry Lock, you will need to hand the levers
to the correct orientation of your door. If you require to re-hand the lock,
follow these simple instructions:
1. Ensure your door is open and the Schlage Ease™ lock is unlocked.
2. Insert your override key and turn it clockwise to unlock it.
3. Use a pointed object, like a paper clip, to depress the catch
mechanism located on the underside of your lever. This should
release the lever for you to remove it.
4. Remove and rotate the cylinder ensure the tail piece is vertical to align
with the turn plate.
5. Remount your lever in the correct direction and reinsert the key to turn
clockwise to unlock. This should allow you to click the lever in place,
turn back the key to remove.