ALLEN & HEATH XONE:96 User manual

X96 WDSRN_ Issue 1 X96_AFW102_PC 11/18 Page 1 of 3
®
v1.0.2 MAINTENANCE RELEASE
AUDIO FIRMWARE
ALLEN&HEATH®

X96 WDSRN_ Issue 1 X96_AFW102_PC 11/18 Page 2 of 3
This maintenance release implements reconfiguration of the DAC codec for your XONE:96
This bundle includes v1.0.2 Audio Firmware for Windows PC
Xone Product XONE:96
Audio Firmware v1.0.2 [Xone96AudioFirmware1.0.2.bin]
PC Device Drivers v4330
Operating System: Compatible Support Active
Microsoft Windows10  
Microsoft Windows8  
Microsoft Windows7  
see p.3 for software changelog
Installing XONE:96 Audio Firmware
! IMPORTANT: Ensure current ASIO* compatible Device Drivers are fully installed on the host PC
! Ensure you download & install the correct Device Software for your operating system;
 Go to www.allen-heath.com/ahproducts/xone96
Click PC DEVICE SOFTWARE
Download the ‘current’ Audio Firmware bundle: X96_AFW102_PC.zip
 Move the X96_AFW102_PC.zip to your system desktop and extract the Audio Firmware file;
Xone96AudioFirmware1.0.2.bin
 Connect the PC to the mixer’s USB 1 port and power the Xone:96 ON
! IMPORTANT: the host must connect to the USB 1 port during installation.
 If the PC is connected to USB 2 the installer application will not find the Xone:96
 Check that the mixer is correctly connected and visible via the PC’s Sound dialogue;
 Search > Sound (Control Panel) to open the dialogue
And that the Xone:96 mixer is not selected for sound playback and recording during the install.
PLEASE FOLLOW INSTRUCTIONS FOR INSTALLATION CAREFULLY
XONE:96 AUDIO FIRMWARE v1.0.2



X96 WDSRN_ Issue 1 X96_AFW102_PC 11/18 Page 3 of 3
XONE:96 AUDIO FIRMWARE v1.0.2
Xone Product XONE:96
Audio Firmware v1.0.2 [Xone96AudioFirmware1.0.2.bin]
PC Device Driver v4330
Installing XONE:96 Audio Firmware continued...
Close all Audio and MIDI applications before running the install.
 Browse to the install directory of the Device Driver;
 - the default is:
(C):\Program Files\Allen & Heath\XONE USB Driver\XONE 96\W10_x64
 Select the Xone96Dfu.exe application.
 Click Open to run the installer
 The Audio Firmware currently installed is displayed next to
Current Firmware:
 If Current Firmware displays v1.0.2;
 - the XONE:96 is up to date
! - you do not need to run the install.
 Click EXIT to close the application.
 Power-cycle the Xone:96 mixer (turn OFF/ ON)
before further use.
 If Current Firmware displays v1.0.0;
 Click the Browse tab in the installer application and navigate to the desktop
 Select the Xone96AudioFirmware1.0.2.bin file and click Open
 Click the Start tab to install the new Audio Firmware
 Installation takes a few seconds during which various messages are displayed
 After the installation is complete, click EXIT to close the installer application.
 Power-cycle the Xone:96 mixer (turn OFF/ ON) before further use
 The Audio Firmware update is now complete.
Software Changelog
Xone Product XONE:96
Audio Firmware v1.0.2 [Xone96AudioFirmware1.0.2.bin]
Operating System: MS Windows [PC]
 v1.0.2 Audio Firmware maintenance update implementing DAC codec reconfiguration
 XONE96-25 FIXED: de-emphasis filter status @ 44.1kHz / 48kHz sample rates
If you experience a problem during installation, please contact A&H Product Support:
http://support.allen-heath.com
* ASIO is a trademark and software of Steinberg Media Technologies GmbH
PLEASE FOLLOW INSTALL & UPDATE INSTRUCTIONS CAREFULLY
