Allen-Bradley Bulletin 700S-CF User manual

Safety Control
Relays–The
Safe Solution
Bulletin 700S-CF
Bulletin 700S-P

Bulletin 700S-CF
Bulletin 700S-P
Rockwell Automation introduces a new category of relays
designed to meet the latest and emerging worldwide safety
standards. These safety control relays offer special features
to enable you to design safe control circuits with current
ratings up to 20 Amps.
Bulletin 700S Safety Control Relays provide mechanically-linked
contacts on all poles. Mechanically-linked contacts are required in
feedback circuits for modern safety applications, such as e-stops,
safety gates, light curtains, and master control relays.
Mechanically-Linked Contacts
This feature allows detection of a welded contact condition.
Mechanically-linked contacts are linked together; they are not
independent. If a N.O. contact welds, all N.C. contacts remain
open. If a N.C. contact welds, all N.O. contacts remain open.
Double-Break Contacts
This design provides better protection against contact welding
than a single break design. It offers greater DC load breaking
capability and better isolation. This feature also provides
separation of N.O. and N.C. circuits. Double-break contacts open
the circuits in two places, creating two air gaps and reducing the
probability of welded contacts by more that 50% compared to
a single-break design.
Easy Identification
The red faceplate allows easy identification of safety
devices. This face place displays the IEC 60947-5-1
mechanically-linked symbol.
Anti-Tamper
The anti-tamper feature ensures the long-term integrity of your
safety system. All contact blocks are permanently fixed to ensure
that the safety function is not jeopardized. Manual operation and
field modifications are prevented.
Product Profile
Safety Control Relays
Designed To Meet Worldwide
Safety Standards
700S-CF (8 pole)
700S-P (4 –12 pole)
IEC mechanically-linked symbol
Double-break contacts
reduce the probability of a
welded contact.

3
Bulletin 700S-CF
Safety Control Relays
0
Bulletin
700S-CF
•Positively
guided/mechanically
linked contacts
•Mechanically-linked
contacts symbol
prominently displayed
on front
•Red face plate
•8 poles, all permanently
attached
•Ideal for use in safety
circuits
•AC and DC operating
coils
•SUVA third-party
certification
TABLE OF CONTENTS
Description Page Description Page
Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Description
Bulletin 700S-CF Safety Control Relays provide mechanically linked, positively guided
contacts, which are required in feedback circuits for modern safety applications. The
positively guided N.C. auxiliary contacts will not change state if a N.O. contact welds.
Use with safety relays to expand output capability.
Your order must include:
•Cat. No. of the relays required, complete
with coil suffix.
•Cat. No. of adder decks, timers and
accessories required.
•If required, the part number of
replacement coils.
Conformity to Standards Approvals
IEC 947-5-1 CE Certified
EN 50011, EN 50005, EN 50022 CSA Certified
UL 508 UL Listed, File E14840, Guide NKCR
VDE 0660 SUVA Third Party Certified
CSA C22.2 Part 14

Bulletin 700S-CF
Safety Control Relays
4
Product Selection
Type S-CF Safety Control Relays — 8-Pole AC and DC Coil Voltages
⊗AC Coil Voltage Suffix Code
⊗DC Coil Voltage Suffix Code ➊
➊When ordering DJ coil with built-in surge suppression, remove Zfrom the Cat. No.
Example: Cat. No. 700S-CF440Z⊗C becomes Cat. No. 700S-CF440DJC.
Connection Diagrams Contacts 700S-CF
AC Coils DC Coils
Main
Contacts
Auxiliary Contacts
Cat. No. Cat. No. ➊
N.O. N.C.
62 700S-CF620⊗C700S-CF620Z⊗C
53 700S-CF530⊗C700S-CF530Z⊗C
44 700S-CF440⊗C700S-CF440Z⊗C
35 700S-CF350⊗C700S-CF350Z⊗C
Voltage 12 24 32 36 42 48 100 100-
110 110 120 127 200 200- 220 208 208- 240 220- 230
50 Hz R K V W X Y KP – D P S KG – – – F
60Hz QJ–V–X – KP – D – – KG H L –
50/60 Hz – KJ – – – KY KP – KD – – KG – – – –
Voltage 230 230-
240 240 277 347 380 380- 400 400 400- 415 440 480 500 550 600
50 Hz – VA T – – – N – G B – M C –
60Hz––ATIE–––NB––C
50/60 Hz KF – KA – – – – KN – KB – – – –
Voltage 912 24 36 48 60 64 72 80 110 115 125 220 230 250
Standard R Q J W Y Z B G E D P S A F T
With diode
suppressor ——DJ——————————— —
33
34
K1
54
53
62
61
74
73
84
83
54
53
62
61
74
73
84
83
54
53
62
61
74
73
84
83
33
34
K1
54
53
62
61
72
71
84
83
33
34
K1
54
53
62
61
72
71
82
81
33
34
K1

5
Bulletin 700S-CF
Safety Control Relays
Specifications
General
➊For sixteen or more strands, end ferrule is required.
➋Defined in IEC 947-5-1 annex L. Mechanically-linked is a relationship
between contacts of opposite types (i.e., N.O. and N.C.).
➌If the accessory is a pneumatic timer or latch, there is no
mechanically-linked guidance; the accessory contacts are
independent.
Cat. No.
700S-CF
main poles
front auxiliary
contacts
Contact Ratings — NEMA A600, P600 A600, Q600
UL General Purpose Current 20A !0A
Minimum Contact Rating 17 – 19.9V 30 mA
20 – 24V 20 mA
Contact Ratings — IEC
AC-15 (solenoids,
contactors) at rated
voltage
IEC 947, EN 60947
24V 15 A 6 A
48V 15 A 6 A
120V 14 A 6 A
240V 10 A 5 A
400/415V 5 A 3 A
480V/500V 2.5 A 1.6 A
600V 1.8 A 1.2 A
690V 1 A 1.0 A
AC-12
(Control of
AC resistive
loads)
IEC 947, EN
60947
40°C
I
th 20 A 10 A
230V 10 kW
400V 17 kW
690V 30 kW
60°C
I
th 20 A 6 A
230V 8 kW
400V 14 kW
690V 24 kW
DC-12
(Control of DC resistive
loads)
IEC 947
EN 60947
24V 12 A 12 A
48V 9 A 9 A
60V 5.0 A 3.5 A
110V 3.5 A 3.5 A
125V 3.0 A 3.0 A
220V 0.55 A 0.55 A
440V 0.2 A 0.2 A
DC-13 IEC 947,
EN 60947,
Solenoids and
contactors 24V 5 A 5 A
48V 2 A 2 A
60V 1.5 A 1.5 A
125V 0.7 A 0.55 A
220V 0.25 A 0.25 A
440V 0.12 A 0.12 A
600V 0.1 A 0.1 A
Avg-Mechanical Life
(ops) [Mil] 15 15
Average-
Electrical
Life
(ops)
AC-15
(240V, 3 A) [Mil] 1.1 0.75
Terminal Cross-Sections
Terminal Type
Terminal Size per IEC 947-1 2 x A4 2 x A4
Solid/
Stranded ➊
1 or 2
Conductor
Conductor
[mm2]
[mm2]
1.5…6
1…4
0.5…2.5
0.75…2.5
Max. Wire Size per UL/CSA [AWG] 16…10 18…14
Tightening Torque [lb.-in.] 8.9…22 8.9…13.3
Tightening Torque [N•m] 1…2.5 1…1.5
Yes Yes
Location of
welded
N.O.
contacts
State of N.C. Contacts if N.O. contact welds
Main Front aux. Left side
aux. Right side aux.
Main Open Open ➌Open Open
Front aux. Open Open ➌Open Open
Left side
aux. Open Open ➌Open Open
Right side
aux. Open Open ➌Open Open
Mechanically
-linked
Contacts ➋

Bulletin 700S-CF
Safety Control Relays
6
Specifications, Continued
Control Circuit
➊For 9V DC, code ZR, use operating voltage 0.65… 1.3 x Us.
For 24V DC, code ZJ or DJ, use operating voltage 0.7… 1.25 x Us.
General
➋8 kV for main poles, 6 kV for front aux. contacts.
➌40 degree max. for 700S-CF350 with DC coil.
➍Operation in 70°C ambient is permitted with current reduction of 15%
below rated values
Cat. No.
700S-CF
Operating Voltage
AC 50/60 Hz Pickup [x Us]0.85…1.1
Dropout [x Us]0.3…0.6
DC ➊Pickup [x Us]0.8…1.1
Dropout [x Us]0.1…0.6
Coil Consumption at nominal voltage
AC 50/60 Hz Inrush [VA/W] 70/50
Seal [VA/W] 8/2.6
DC Inrush/Seal
warm coil [W] 6.5
Inrush/Seal
cold coil [W] 8.5
Operating Times
AC 50/60 Hz Pickup Time [ms] 15…30
Dropout Time [ms]10…60
DC Pickup Time [ms] 40…70
Dropout Time [ms]7…15
With integrated suppression [ms]14…20
With diode
suppression [ms]70…95
Cat. No. 700S-CF
Rated Insulation Voltage
U
i
IEC 690V
UL; CSA 600V
Dielectric Withstand Voltage 2500V
Rated Impulse Strength
U
imp 8 kV ➋
Rated Voltage
U
e
AC 115, 230, 400, 500, 690V
DC 24, 48, 110, 220, 440V
Short-Circuit Protection IEC 947-5
Fuse-Type GG 20 A
Rated Frequency 50/60 Hz, DC
Ambient Temperature
Storage –55…+80°C (–67…176°F)
Operation at nominal current –25…+60°C (–13…140°F)➌➍
Corrosion Resistance
humid-alternating climate,
cyclic, per IEC 68-2-30 and
DIN 50 016, 56 cycles
Altitude 2000 m above mean sea level,
per IEC 947-4
Type of Protection IP2X in connected state
Finger Protection
safe from touch by fingers and
back of hand per VDE 0106,
Part 100

7
Bulletin 700S-CF
Safety Control Relays
Dimensions
AC Safety Control Relays
DC Safety Control Relays
➊All Cat. Nos. are factory stocked.
Accessories
Mounting Positions
abcc1c2∅dd1 d2 Cat. No. ➊
45
(1-25/32)
81
(3-3/16)
119.5
(4-3/4)
114.5
(4-43/64)
6
(1/4)
2 - 4.5
(2 - 3/16)
60
(2-23/64)
35
(1-25/64) 700S-CF
abcc1c2∅dd1 d2 Cat. No. ➊
45
(1-25/32)
81
(3-3/16)
145.5
(5-49/64)
140.5
(5-37/64)
6
(1/4)
2 - 4.5
(2 -3/16)
60
(2-23/64)
35
(1-25/64) 700S-CF
Safety Control Relays with mm (inches)
Auxiliary contact block for side mounting 1- or 2-pole a + 9 (a + 23/64)
Electronic Timing Module on coil terminal side b + 24 (b + 15/16)
Mechanical Interlock on side of contactor a + 9 (a + 23/64)
Interface Module on coil terminal side b + 9 (b + 23/64)
Surge Suppressor on coil terminal side b + 3 (b + 1/8)
Labeling with label sheet
marking tag sheet with clear cover
marking tag adapter for System Bul. 1492W
+ 0
+ 0
+ 5.5
(+ 0)
(+ 0)
(+ 7/32)
c2
c
c1
➊
Mounting Position
AC Safety Control Relays DC Safety Control Relays

Bulletin 700S-P
Safety Control Relays
8
0
Bulletin 700S-P
•Mechanically-linked
contacts meeting
IEC 947-5-1-L
•2…12 poles–all
mechanically-linked
•Red faceplate for easy
identification of safety
circuits
•IEC mechanically-linked
contacts symbol
displayed on front
•Double-break contacts
to reduce probability of
welded contacts
•Visual indication of
contact state
•TamperresistantLexan®
cover helps prevent
changes which could
jeopardize safety
•Complete catalog
number displayed on
front
•Ideal for use in safety
circuits
TABLE OF CONTENTS
Description Page Description Page
Product Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Approximate Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Description
The 700S-P safety control relay is designed with special features for use in safety circuits. It is designed to reduce the possibility
of a welded contact, and, with external monitoring, a welded contact can be detected if one ever occurs. It features mechanically
linked contacts for all N.O./N.C. contact pairs which allow detection of a welded contact in any of the poles. Contacts cannot be
added, removed, nor changed so that the safety function is never jeopardized. Similarly, there is no “push-to-test” function so that
safety function is not jeopardized. Typical applications: use with E-stops, light curtains, safety gates, safety interlocks.
Your order must include:
•Cat. No. of the relays required,
complete with coil suffix.
Conformity to Standards Approvals
NEMA ICS-5-2
EN/IEC 60947-5-1, including
Mechanically-linked Contacts
IEC337-1 CENELEC
BS4794
cULus Listed
VDE 0660
UL File #E14840, Guide NKCR
CSA C22.2 No. 14
ANSIB11.19, section 5.5.1, Control Reliability
UL508
CE Certified

9
Bulletin 700S-P
Safety Control Relays
Product Selection
Type S-P Safety Control Relays — AC and DC Coil Voltages
þ For other coil voltages, consult your local Allen-Bradley Sales Office.
➊ For other coil voltages, consult your local Allen-Bradley Sales Office.
⊗AC Voltage Suffix Code
The Cat. No. as listed is incomplete. Select a voltage suffix code from the table below to complete the Cat. No.
Example: Cat. No. 700S-P310 becomes Cat. No. 700S-P310A1 for a 120V AC coil.
Connection Diagrams and terminal markings Contacts AC Coils 24V DC Coils
Coil and Main Contacts Additional Contacts Additional Contacts
Cat. No. ➊Cat. No. ➊
N.O. N.C.
——
31
700S-P310⊗700S-DCP310Z24
——
22
700S-P220⊗700S-DCP220Z24
—71
700S-P710⊗700S-DCP710Z24
—62
700S-P620⊗700S-DCP620Z24
—53
700S-P530⊗700S-DCP530Z24
—44
700S-P440⊗700S-DCP440Z24
—35
700S-P350⊗700S-DCP350Z24
10 2 700S-P1020⊗700S-DCP1020Z24
Hz 24 115-120 230-240 277 460-480
60 A24 A1 A2 A27 A4
A1X
A1Y
A2X
A2Y
A3X
A3Y
A4X
A4Y
K1
K2
A1X
A1Y
A2X
A2Y
A3X
A3Y
A4X
A4Y
K1
K2
A1X
A1Y
A2X
A2Y
A3X
A3Y
A4X
A4Y
K1
K2
B1X
B1Y
B2X
B2Y
B3X
B3Y
B4X
B4Y
A1X
A1Y
A2X
A2Y
A3X
A3Y
A4X
A4Y
K1
K2
B1X
B1Y
B2X
B2Y
B3X
B3Y
B4X
B4Y
A1X
A1Y
A2X
A2Y
A3X
A3Y
A4X
A4Y
K1
K2
B1X
B1Y
B2X
B2Y
B3X
B3Y
B4X
B4Y
A1X
A1Y
A2X
A2Y
A3X
A3Y
A4X
A4Y
K1
K2
B1X
B1Y
B2X
B2Y
B3X
B3Y
B4X
B4Y
A1X
A1Y
A2X
A2Y
A3X
A3Y
A4X
A4Y
K1
K2
B1X
B1Y
B2X
B2Y
B3X
B3Y
B4X
B4Y
A1X
A1Y
A2X
A2Y
A3X
A3Y
A4X
A4Y
K1
K2
B1X
B1Y
B2X
B2Y
B3X
B3Y
B4X
B4Y
C1X C2X C3X C4X
C1Y C2Y C3Y C4Y

Bulletin 700S-P
Safety Control Relays
10
Specifications
➊Coil voltage required for proper operation (percent of rated coil voltage).
➋Temperature inside the panel.
➌ 90% of devices are expected to meet or exceed 12.5 million operations, and 50% of devices are are expected to meet 20 million operations.
Type 700S-P
Electrical
Contact Rating Continuous 10 A @ 600V AC
5 A @ 600V DC
Ratings
Make/Break
AC NEMA A600
DC NEMA P600
Minimum Contact Switching Ratings 10V, 50 mA
DC Switching
Contacts
in Series
Volts DC
24 64 125 250 500 600
1 5 A 2.2 A 1.1 A .55 A .24 A .2 A
2 10 A 10 A 5 A 2 A .7 A .5 A
3 — — 7 A 3 A 1.5 A 1.0 A
4 — — 10 A 5 A 2.5 A 1.5 A
Contact Electrical Life—Resistive Loads 1.5 million operations at 10A break at 120V AC 14 million operations at 1A break at 120V AC
6 million operations at 1A break at 24V DC
Coil Voltage Range ➊
AC 85…110%
DC 80…110%
Battery
Charging 85…115%
Coil Consumption
50 Hz 60 Hz
AC Inrush 132 VA 138 VA
Sealed 19.3 VA 19 VA
DC Inrush 12.7 W
Sealed 12.7 W
Mechanical
Mechanically Linked Contacts All contacts are mechanically linked per IEC 947-5-1 annex L for 2 to 12 poles
Operating Time
Pickup AC – 10…20 ms
DC – 30…50 ms
Dropout AC – 10…20 ms
DC – 20…33 ms
Mechanical Life 12.5 million operations ➌
Construction
Contact Arrangement 2 to 12 Poles, Double Break Contacts
N.O. or N.C. (8 N.C. Maximum)
Contact Material/Design Silver Nickel/Bifurcated
Mounting Panel mount or mount on 700-MP Rail
Horizontal Mounting Recommended
Environmental
Temperature
Operating ➋–20…+65°C (–4…149°F)
Storage –40…+65°C (–40…149°F)
Wire Terminations
Wire size per UL/CSA 1X #18 AWG…2X #12 AWG
Tightening Torque 8…12 lb-in. (0.9…1.4 N•m)