AllerAir AirMedic+ none User manual

Model
Operation and Maintenance Manual
Our Famous Guarantee
More filtration.
More features.
Better value.
Call our indoor air quality experts
1-888-852-8247
or
Visit our website:
www.allerair.com
For more information
AllerAir Industries Inc. Toll free: 1-888-852-8247 / Fax: [phone] www.allerair.com
AllerAir_Mk: Manuals:Manual_AirMedic/Oct 05, 2006
AllerAir Advantage
All metal housing to avoid plastic off-gasing
Totally innert gaskets. No use of rubber or neoprene
Separate carbon and HEPA filters for easier,
less costly maintenance
No ozone emissions
Medic
+
Medic
+

Congratulations, you are moments away from fresher, cleaner indoor air. Your new
AllerAir unit will combat many of the chemicals, gases, odors and particles
responsible for poor indoor air quality, and in turn, health concerns such as
allergies, asthma, sick building syndrome and multiple chemical sensitivity. As with
any air cleaner, proper maintenance of your unit is a vital part of keeping it
operating at peak efficiency.
AllerAir Industries Inc.
Air Medic +
+
Operation:
Most Air Medic units are shipped fully assembled and ready for use with the
exception of the D & DX model which ship with their large carbon filters in a
separate box.This is done to safeguard your unit during shipping. To insert the filter,
refertotheFilter Assembly Air Medic, Air Medic D diagram. (note warning)
Please plug units into a 120V-15amp outlet. For best results, situate your unit close
to your sitting, sleeping or work area.
Note: Please save your packaging. Original packaging will be required for all
warranty returns.
Replacement parts:
Models
N6FMPW001
N6FMPB002
N6FH0411
A5FMR002
AM000911
NOTE: white & sandstone units have white prefilters
black units have black prefilters
White prefilter
Black prefilter
HEPA filter
Micro particulate filter
Bulk Exec carbon mix
Packs of 4
Packs of 4
1 filter
Pack of 1
44 lb box
Prefilters Notes Models
AM000912
AM000912 (2")
AM000912 (3")
A4EL0050
A4EL0045
A4EL9008
Bulk Vocarb carbon mix
Bulk Vocarb carbon mix
Bulk Vocarb carbon mix
3-way switch
8'-6" black cord
Control knob
44 lb box
44 lb box
44 lb box
1
1
1
Prefilters Notes
WARNING !
Before removing the top or bottom of the unit for any
reason, always unplug the cord from the power supply.
Maintenance:
HEPA Filter
Change the HEPA filter every 3 - 5 years or after a noticeable decrease in air quality.
Pre-Filter
Change or vacuum the pre-filter every 2 - 4 months depending on the dust level in
the area of use.
Carbon
Change the carbon filter after 2 years or after a noticeable decrease in air quality.
Check out other AllerAir products
TM
Serious Purification Systems (Over 80 Models Available)
* Air flow from 50 to 5000 CFM
UV
UV LIGHT BULB
HEPA FILTE R
CARBON FILTER
PURE AIR DIS CHARGE
5000
SERIES
6000
SERIES
8000
SERIES
4000
SERIES
AIR RETURN
AIR DIFFUSE R
SWITCH BOX
FUSE
DIS CH AR G E E L B OW
CARBON CHARCOAL FILTER
150 FE E T C OR D
PREFILTER
AIR INTAKE
CAUTIONARY
STRIPING
2HEAVEY DUTY
HANDLES
INLET FLANGE
AIR RETURN
FLEX HOSE AIR INTAKE
FURNACE SERIES RESTORATOR UNIT
OFFICE
COMME R CIAL
INDUS T R IAL
PORTABLE
For: Laboratories
Jeweller Soldering For: Allergies
Asthma
Respiratory Problems
Smoking
For: S ick Building S yndrome
Chemicals
Odors
Gases
For: Air Handler
ExhaustSystem
For: Fire Restoration
Sewer Backup
For: Desk Top
Nursery
Travel
Truck Cab
For: Isolation
Day Care
Medical R ecp.
AVAILABLE:
C arbon filters without silicone
R efillable ca rbon filters
Units for multiple chemica l sens itivities
REVERSE LAMINAR FLOW
WAREHOUSE SOLDERING
HOME
400 CFM
400 CFM 400 CFM 400 CFM
50 CFM
200 CFM
TM
INDUSTRIES
I-6500
TM
INDUSTRIES
I-6500
500 to 1000 CFM
2 7

FILTERS ASSEMBLY - Air Medic +
+
Step 3
Gently grasp wheels. Remove the
base by pulling gently on the wheel
Step 1
Turn Power Off and
unplug from receptacle.
Lay unit upside down.
Step 4
Reach inside the unit and remove
only1ofthe2feltpads.
Step 5
Gently insert HEPA filter into the
unit.
Step 6
Than put in the Carbon filter.
Step 2
With a #2 Philips screw driver,
remove the four screws from the
bottom of the unit.
Step 8
Place lid back to its proper position
by aligning the arrow with the rear
seam.
Step 9
With a screw driver, place 4
screws back into their positions.
Step 10
Gently turn the unit back onto its wheels. And your AllerAir purifier is now ready for use.
Step 7
Put back the felt pad removed in
Step 4.
Congratulations, you are moments away from fresher, cleaner indoor air. Your new
AllerAir unit will combat many of the chemicals, gases, odors and particles
responsible for poor indoor air quality, and in turn, health concerns such as
allergies, asthma, sick building syndrome and multiple chemical sensitivity. As with
any air cleaner, proper maintenance of your unit is a vital part of keeping it
operating at peak efficiency.
The AllerAir AirMedic+
+
- Indoor Air Purification System
Operation:
Your unit is shipped fully assembled and ready for use. Plug into 120V-15amp
outlet. For best results situate your unit close to your sitting, sleeping or work area.
NOTE: Please save your packaging. Original packaging will be required for all
warranty returns.
AllerAir Industries Inc. Toll free: 1-888-852-8247 / Fax: [phone] www.allerair.com
Follow this instruction when your filters and unit are shipped in separated boxes.
6 3
TEN YEAR LIMITED WARRANTY
AllerAir units in this series are covered by a ten-year warranty against defects in
materials and workmanship for a period of ten years from the date of purchase.
Warranties are limited to the original purchaser and are thus non-
transferrable.
Units must be shipped back to AllerAir in their original packaging. Clients are
responsible for insuring packages with carriers such as UPS.
The warranty does not cover expendable parts such as filters and pre-filters.
AllerAir Industries Inc. is not liable for any consequential damages for breach of this
or any other warranty expressed or implied whatsoever.
Five years parts and labor additional five years parts.
AllerAir top quality air purification machines are distributed worldwide
for commercial, residential, institutional and industrial use. The units
employ cutting-edge technology, and are built according to the highest
standards required for health and safety.

ALLERAIR'S AIR PURIFICATION SYSTEM
LASER TESTED TRUE HEPA
HEPA (High Efficiency Particulate Arrestance) filters were developed for the Atomic
Energy Commission to remove radio active dust from their laboratories.The are now the
primary filtration systems for electonic clean room assembly, hospital surgeries, bio
engineering, pharmaceutical laboratories and any other space where clean air is critical.
HEPA will trap microscopic dust which will give you distress from allergies, asthma,
respiratory problems, chemical sensitivities and sick building syndrome. It will trap
99.97% of all particles down to 0.3 microns (including bacteria, dust mite antigens,
respiratory particles, fungal and other microbiologicals. For these reasons that HEPA
filtration is recommended by more allergists, medical professionals and clean air
consultants than any other filter system available.
CARBON FILTER (ACTIVATED AND GRANULATED)
We use only activated granular carbon mixed with zeolite and specially impregnated
carbons. We stay away from dust carbon which has been impregnated onto a poly or
foam material. This type of carbon filter has to be changed as often as every week to be
fully effective. AllerAir's carbon filter can last up to 2 or 3 years and more, depending on
the level of toxins in the area.
The activated carbon we use can adsorb up to 60% of its own weight in toxic gases,
fumes and chemicals. These toxic substances make us ill, and are found in every home,
office and industry.
OTHER FILTERING SYSTEMS AVAILABLE
Ozone generators, negative ion machines and electrostatically charged units all
generate ozone which is a toxic substance. Any unit which provides ozone cannot be
recommended by Health and Welfare or by the Lung Association.
AllerAir's units on the other hand do not produce any ozone whatsoever. The latest air
purification technology does not add anything to the air (especially impurities like
ozone or P.V.C.s). AllerAir's unit scrubs impurities and toxins out of the air.
ENERGY COSTS
We use a high efficiency motor which cost pennies a day to operate in contrast to
almost all other manufactures who use the lowest price motor available. One of the
reasons we can offer ten year warranty is because of the sophisticated motor we use. We
have spared no effort to give you the most for the least.
ADDITIONAL INFORMATION
The AirMedic+ unit you have purchase is equiped with a variable speed control to allow
you to control the air flow and sound to a very low level.
The air coming out of the unit may feel cool to your hand, but the temperature of the air
is actually the same. And AllerAir units are specially designed to have no offgasing
because our entire unit housing is made of steel.
IMPORTANT NOTICE
To receive maximum use of HEPA filter media when used in freshly painted room, you
should first remove the HEPA filter from the unit to avoid contaminating the HEPA
media. Turn unit off and Unplug unit. Remove bottom screws. Open bottom of unit,
Grasp outer filter ring firmly with both hands and remove carefully. Close unit, plug into
grounded receptacle then turn on. Replace carbon filter before reinstalling HEPA filter.
Do not allow any object to be stuck or poked into any opening of the unit.
Never service the unit before turning unit off and removing electrical plug
from the wall receptacle.
AllerAir Industries Inc. Toll free: 1-888-852-8247 / Fax: [phone] www.allerair.com
4 5
FILTER ASSEMBLY - Air Medic D
D Models have a 3" deep carbon filter.
STEP 7
Place lid back to its proper
position by aligning the arrow
with the rear seam.
STEP 8
Replace the four screws.
STEP 9
Turn the unit back onto its
wheels. It is now ready for
immediate use.
STEP 1
Turn Power off and
unplug receptacle.
Lay unit upside down.
STEP 2
With a #2 Philips screw driver,
remove the four screws from
the bottom of the unit.
STEP 3
Gently grasp wheels.
Remove base by gently pulling
on the wheels
STEP 4
Remove only one of the white, felt,
donut-shaped gaskets from the inside
of the purifier body.
STEP 5
Insert the carbon filter (either a
Model 600D Carbon)
STEP 6
Replace the gasket that had been
removed in STEP 4.