Allied Telesis PR-400 MI User manual

PR-400 MI Set-Up Guide
*Note Themodem can also functionas awireless Router
1

Overview of Modem Lights
2

Plug-in your PC
Step 1: Plug-in the Ethernet
cable (RJ-45)from your PC or
MAC into the LAN 1 port on
the NTT Router
Step 2:
Verify that the
Step 2:
Verify that the
connection on both ends
are connected
Step 3: Make sure that you
have the OCN username
and password that was sent
to you via e-mail. (Without your
username and password, you cannot complete the
set-up process)
3

Launch your Browser
Step 1: Type “http://192.168.1.1” in your
web browser
Step 2: Press Enter or click here with your
mouse
mouse
Note: These stepswill allow access
into the NTT Router
4

Enterlogin for router access
You will be prompted twice for a user name
and password. Type in user (lower case) for the login and user
(lower case) for the password both times.
5

ConfigurePPPoE on the NTT Router
Step1:
Make sure that you have the user name and
password that was sent to you available via
email
Step2: In the top portion ISP1 will be
located in the first block
Step3: Type in your PPPoE UserName
(i.e., [email protected]) in the next block
below ISP1
Step4: Type in your 6 character
password in the block below
Step5: Click the button below and the
modem will reboot
Step 6: Verify connectivity by typing in
your favorite website in the internet browser
6

Wireless Set-up for PR-400MI NTT Router
Step 1: Unplugthe Ethernet cablefrom the modem
Step 2: Search for the wireless networks and look for the
SSID-1 (i.e. pr400mi-308c7f-1) of the NTT Router
Step 3:Locate the label on the back of theNTT Router thathas
the MAC Address andSSID
the MAC Address andSSID
Step 4: Click on the SSID and it will prompt you for a
password
Step 6:Type in the MAC address of the NTT Router
Step 7: Test your wireless connection by tryingto
connect to your favorite website and repeatsteps 2-4 on your
other wireless devices for wireless connectivity.
7