Allied Telesis AT A35/SX AT-A35-SX/SC AT-A35-SX/SC User manual

Allied Telesis www.alliedtelesis.com
Datasheet | Expansion Modules
Rapier Series Uplink Modules
Gigabit & Fast Ethernet
AT-A35/SX
1xGigabit fiber uplink SC connector
AT-A35/LX
1xlong haul Gigabit fiber uplink SC
connector
AT-A39/T
1xauto-negotiating Gigabit copper uplink
RJ-45 connector
AT-A40/SC
Fast Ethernet multimode fiber uplink, SC
connector
AT-A40/MT
Fast Ethernet multimode fiber uplink, MT
connector
AT-A41/SC
Fast Ethernet singlemode fiber uplink, SC
connector
AT-A41/MT
Fast Ethernet singlemode fiber, MT connector
AT-A42/GBIC
Uplink module with 1 GBIC bay
Uplink Flexibility
Uplink modules provide a flexible range of
interface options, including Gigabit copper, Fast
Ethernet fiber, and Gigabit fiber. This flexibility
allows Rapier L3 switches to span a wide variety
of network topologies and physical media.
Uplink modules can be changed or replaced to
meet changing network requirements, reducing
backup inventory costs.
Model Compatibility
Rapier Rapier i Rapier G Rapier GF 8700XL
AT-A35/SX Yes Yes Yes Yes Yes
AT-A35/LX Yes Yes Yes Yes Yes
AT-A39/T Yes1Yes Yes Yes Yes
AT-A40/SC No Yes Yes Yes Yes
AT-A40/MT No Yes Yes Yes Yes
AT-A41/SC No Yes Yes Yes Yes
AT-A41/MT No Yes Yes Yes Yes
AT-A42/GBIC Yes Yes Yes Yes Yes
1. Does not offer auto-negotiation, operates at 1000T only.
Regulatory Standards
AT-A35/SX, AT-A35/LX & AT-A39T
EMC EN55022 class A, FCC class A, and
VCCI class A
Immunity EN55024
Safety Listing - UL, cUL, TUV
Standards - UL 60950, CAN/CSA-C22.2
NO. 60950-00, EN60950
AT-A40/SC, AT-A40/MT, AT-A41/SC, AT-A41/MT & AT-A42/GBIC
EMC EN55022 class A, FCC class A, and
VCCI class A
Immunity EN55024
Safety Listing - UL, cUL, TUV
Standards - UL 60950, CAN/CSA-C22.2
NO. 60950-00, EN60950
Environmental Specifications
Operating Temp. 0°C to 40°C (32°F to 104°F)
Storage Temp. -25°C to 70°C (-13°F to 158°F)
Relative Humidity 5 to 95% non-condensing
Key Features
•Gigabit fiber
•Gigabit fiber long haul
•Auto-negotiating Gigabit copper
•Fast Ethernet fiber (singlemode fiber
& muti-mode fiber)
•Flexible, hot-swappable GBIC
•Interoperable with Rapier i, Rapier G6,
Rapier G6F & 8700XL switches
•LED status indicators
•Compact size
Gigabit Interface Converter
(GBIC) Modules
AT-G8SX
500m SX GBIC, based on 50 Micron fiber
220m SX GBIC, based on 62.5 Micron fiber
AT-G8LX10
10km LX GBIC, based on 9 Micron fiber
AT-G8LX25
25km LX GBIC, based on 9 Micron fiber
AT-G8LX40
40km LX GBIC, based on 9 Micron fiber
AT-G8LX70
70km LX GBIC,based on 9 Micron fiber

USA Headquarters |19800 North Creek Parkway |Suite 200 |Bothell |WA 98011 |USA |T: [phone] |F: [phone]
European Headquarters |Via Motta 24 |6830 Chiasso |Switzerland |T: +41 91 69769.00 |F: +41 91 69769.11
Asia-Pacific Headquarters |11 Tai Seng Link |Singapore |534182 |T: [phone] |F: [phone]
www.alliedtelesis.com
©2006 Allied Telesis Inc. All rights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-00458-00 Rev. G
Rapier Series Uplink Modules |Gigabit & Fast Ethernet
Model Port Connector Cable Type1Max Cable Length
AT-A35/SX 1000SX SC 50/125 micron
multimode fiber
62.5/125 micron
multimode fiber
550 m (1,804ft)2
275 m (902ft)3
AT-A35/LX 1000LX SC 9/125 micron
singlemode fiber
50/125 or 62.5/125
micron multimode fiber
3km (1.8mi) increasing to
10km (6mi) if linking
two 1000LX models
550m (1804ft)2
AT-A39/T 10/100/1000T4RJ-45 CAT5
CAT5E
100 to 150m (328 to 492ft)
200m (656ft)
AT-A40/SC 100FX
(multimode fiber, 1300nM)
SC 50/125 or 62.5/125
micron multimode fiber
2km
AT-A40/MT 100FX
(multimode fiber, 1300nM)
MT-RJ 50/125 or 62.5/125
micron multimode fiber
2km
AT-A41/SC 100FX
(multimode fiber, 1300nM)
SC 50/125 or 62.5/125
micron multimode fiber
2km
AT-A41/MT N100FX
(singlemode fiber, 1300nM)
MT-RJ 9/125 micron
singlemode fiber
15km
AT-A42/GBIC 1000X Varies per GBIC Refer to GBIC documentation Refer to GBIC documentation
(ATR)
Model
singlemode/
multimode Wavelength Tx power (dBm) Sensitivity (dBm) Saturation (dBm)
AT-A35/SX multimode fiber 850 -4 to -9.5 -12.5 @ 62.5uM,
-13.5 @ 50uM
0
AT-A35/LX singlemode fiber
multimode fiber
multimode fiber
1310 -3 to -9.5@9uM,
-3 to [email protected],
-3 to -11.5@50uM
-20 -3
AT-A40/SC multimode fiber 1310 -14 to [email protected],
-14 to -22.5@50uM
-34.5 -14
AT-A40/MT multimode fiber 1310 -14 to [email protected],
-14 to -22.5@50uM
-34.5 -14
AT-A41/SC singlemode fiber 1310 -14 to -20 -31 -8
AT-A41/MT singlemode fiber 1310 -14 to -20 -31 -8
Competitive Matrix Ordering Information
AT-A35/SX
1 x 1000SX/SC uplink with SC connector
AT-A35/LX
1 x 1000LX/SC uplink with SC connector
AT-A39/T
1x1000T uplink with RJ-45 connector
AT-A40/SC
100FX multimode fiber uplink
with SC connector
AT-A40/MT
100FX multimode fiber uplink
with MT connector
AT-A41/SC
100FX singlemode fiber uplink
with SC connector
AT-A41/MT
100FX singlemode fiber uplink
with MT connector
AT-A42/GBIC
Uplink module with 1 GBIC bay
(Uses Allied Telesis standards-based
GBIC modules. GBIC ordered separately)
1. Refer to the IEEE 802.3 standards for further cable information.
2. Assumes a fiber optic cable rating of 500 Mhz/Km.
(Maximum cable length is 500m at a cable rating of 400 Mhz/Km.)
3. Assumes a fiber optic cable rating of 200 Mhz/Km.
(Maximum cable length is 220m at a cable rating of160 Mhz/Km.)
4. Early versions of the AT-A39/T operate at 1000Mbps only.
10/100/1000Mbps operation is available only if the AT-A39/T
Uplink Module is installed in a Rapier G6, Rapier G6F or
Rapier i model, otherwise operation is fixed at 1000Mbps.