
INSERT YOUR SOLAR PANEL TO GROUND
1. Connect the ground stake to the ground base.
2. Attach your solar panel to the mount.
3. Adjust the angle of the solar panel on the mount to receive maximum sunlight.
4. Insert the stake to the ground near to your eufy cam.
WIRE SOLAR PANEL TO CAM
Attach the Solar Panel to your Eufy Cam 2C with the specially constructed
outdoor charging cable. The charging cable is designed to provide a
continuous charge to your camera even on days with minimal direct
sunlight. In order to plug this charger in the camera, open the rubber cap
located at the bottom of your camera, and plug in the cable's connector.
Press - firmly after you have plugged in the cable to make sure it is sealed
well.
Cautions:
Do not use harsh industrial-strength cleaning materials to clean the surface of solar panel, potable, non-heated water
or with a 3% soap-and-water with normal pressure is adequate.
Never lift or move the solar panel using the cable under any circumstances.
Solar panel may be mounted at any angle, from horizontal to vertical. To reduce soiling, modules should be mounted
at a minimum of 10 degrees.
Any shade on solar panel will result in decreased power output.
Warranty:
Thank you for purchasing the solar battery charger , should you experience any defects due to the manufacture of this
product, we will provide you with extended 12 months warranty. You are entitled to a replacement or refund for a major
failure.
If
y
ou
have
any
questions,
feel
free
to
con
tact
us
by
email-
Support-[email protected]om, we will get back to youwithin 12H and MAKE IT RIGHT!!
www.alltosolar.com
ALLTO SOLAR TEAM