Alotcer AD2000-G User manual

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 1of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
AD2000 IP Modem User Manual
Support 2G/3G/4G Data Transfer Unit
Xiamen Alotcer Communication Technology Co., Ltd.
Tel:[phone]
Fax:[phone]
Web:en.alotcer.com
E-mail:[e-mail]
Add:NO.146-148, 2nd XingBei Road, JiMei District,
XiaMen,China.

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 2of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
Applicable Models：
Product Type
Model
Product Name
Standard
AD2000-G
GPRS IP MODEM
AD2000-C
CDMA IP MODEM
AD2000-W
WCDMA IP MODEM
AD2000-E
EVDO IP MODEM
AD2000-D
TDD/FDD-LTE IP MODEM
AD2000-GP
GPS+GPRS IP MODEM
AD2000-CP
GPS+CDMA IP MODEM
AD2000-WP
GPS+WCDMA IP MODEM
AD2000-EP
GPS+EVDO IP MODEM
AD2000-DP
GPS+TDD/FDD-LTE IP MODEM

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 3of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
Contents
Contents
Chapter 1 Brief Introduction of Product........................................................................................ 4
1.1 General................................................................................................................................ 4
1.2 Product Feature................................................................................................................. 5
1.3 Block Diagram.................................................................................................................... 7
1.4 Product Spec...................................................................................................................... 7
1.5 Ordering Information....................................................................................................... 10
Chapter 2 Installation Introduction...............................................................................................10
2.1 General.............................................................................................................................. 10
2.2 Encasement List.............................................................................................................. 11
2.3 Installation and Cable Connection................................................................................ 11
2.4 Power................................................................................................................................. 15
2.5 Indicator Lights Introduction...........................................................................................15
Chapter 3 Configuration................................................................................................................ 16
3.1 Configuration Connection...............................................................................................16
3.2 Configuration Introduction.............................................................................................. 16
3.3 Run the configure Tool: AR_IPModemConfigTool.exe.............................................. 17
3.4 Re-power IP MODEM..................................................................................................... 18
3.5 Guide..................................................................................................................................20
3.6 Configuration.................................................................................................................... 21
3.6.1 Server Settings..................................................................................................... 21
3.6.2 IP MODEM Settings.............................................................................................25
3.6.3 Serial.......................................................................................................................31
3.6.4 Keep Alive..............................................................................................................33
3.6.5 Advanced............................................................................................................... 33
3.6.6 SMS........................................................................................................................ 39

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 4of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
3.6.7 GPS........................................................................................................................ 41
3.7 Work Mode Switch...........................................................................................................42
Chapter 1 Brief Introduction of Product
1.1 General
AD2066 IP MODEM is a kind of cellular terminal device that developed based on 2G/3G/
4G technology. It adopts high-powered industrial 32 bits CPU and embedded real time
operating system. It supports RS232 and RS485 (or RS422) port that can conveniently
and transparently connect one device to a cellular network, allowing you to connect to
your existing serial devices with only basic configuration.
It has been widely used on M2M fields, such as intelligent transportation, smart grid,
industrial automation, telemetry, finance, POS, water supply, environment protection, post,
weather, and so on.

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 5of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
IP MODEM Application Topology
1.2 Product Feature
Items
Contents
Industrial
Design
High-powered industrial cellular module
High-powered industrial 32bits CPU
Low power consumption design, support multi-sleep and trigger
modes
Housing: iron, providing IP30 protection
Power range: DC 5~35V
High
Support hardware and software WDT

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 6of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
Reliability
Support auto recovery mechanism, including online detect, auto
redial when offline to make it always online
RS232/RS485/RS422 ports:15KV ESD protection
SIM/UIM port: 15KV ESD protection
Power port: reverse-voltage and overvoltage protection
Antenna port: lightning protection(optional)
Standard and
Convenience
Support standard RS232/RS485 ports that can connect to serial
devices directly
Support intellectual mode, enter into communication state
automatically when powered
Support several work modes
Convenient configuration and maintenance interface
High-perform
ance and
Security
Support TCP server
Support double data centers, one main and another backup
Support multi data centers and it can support 5 data centers at the
same time
Support multi online trigger ways, including SMS, ring and data.
Support link disconnection when timeout
Support dynamic domain name(DDNS) and IP access to data center
Design with standard TCP/IP protocol stack
Support APN/VPDN

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 7of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
1.3 Block Diagram
1.4 Product Spec
Items
Contents
Hardware
System
CPU
Industrial 32 bits CPU
FLASH
1MB (Extendable to 8MB)
SDRAM
256KB(Extendable to 1MB)
Interface
Serial
1 RS232 port and 1 RS485(or RS422) port, 15KV
ESD protection
Data bits: 5, 6 ,7, 8
Stop bits: 1, 1.5(optional), 2
Parity: none, even, odd, space, mark

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 8of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
Baud rate: 110~230400 bps
Antenna
Cellular: Standard SMA female interface, 50 ohm
GPS(optional):Standard SMA female interface, 50
ohm
SIM/UIM
Standard 3V/1.8V user card interface, 15KV ESD
protection
Power
Standard 3-PIN power jack, reverse-voltage and over
voltage protection
Indicator
“PWR”、”RUN”、”Online”、”GPS”(optional)
Network
Wireless
Network
GSM/GPRS/EDGE: 850/900/1800/1900MHz
CDMA: 800/1900MHz
WCDMA/HSUPA/HSPA+: 850/900/1900/2100MHz
CDMA2000 1x/ EVDO Rev. A: 800/1900MHz
TD-SCDMA: 1880-1920/2010-2025MHz(A/F)
TDD-LTE: Band 38/39/40/41& Band 61/62
FDD-LTE: Band 1/2/3/4/5/7/8/13/17/20/25/28
PPP Protocol
Support PPP Protocol
PPP Heartbeat
Maintaining links with the cellular network to prevent
forced sleep, to ensure the stability of dial-up link.
Network
Authentication
Support CHAP/PAP Authentication
TCP Heartbeat
Monitor the server connection
GPS
(optional)
Receiver Type
50-channle
GPS L1（1575.42MHz）C/A code
SBAS: WAAS,EGNOS,MSAS,GAGAN

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 9of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
Max. update
rate
5 Hz
Accuracy
Position: 2.5m CPE
SBAS: 2.0m CPE
Acquisition
Cold starts: 32S
Warm starts: 32S
Aided starts: <1S
Hot starts: <3S
Sensitivity
Tracking: -160dBm
Reacquisition: -160dBm
Cold starts: -146dBm
Timing
accuracy
RMS: 30ns
99%: <60ns
Granularity: 21ns
Time pulse
Configurable, 0.25 to 1000Hz
Power
supply
Standard
Power
DC 12V/1.5A
Power range
DC 5~35V
Communication
Current
<100mA (@12VDC)
Standby
Current
<20mA（@12VDC）
Sleep current
<10mA（@12VDC）
Physical
Dimensions
91x59x23mm
Weight
175g

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 10 of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
Environm
ental
Limits
Operating
Temperature
-35~+75ºC (-31~+167℉)
Storage
Temperature
-40~+85ºC (-40~+185℉)
Operating
Humidity
95% ( unfreezing)
1.5 Ordering Information
Model
Choice
Network
Optional
AD2000
-G: GPRS
-C: CDMA
-W: WCDMA
-E: EVDO
-F: FDD-LTE
-D: TDD/FDD-LTE
P: GPS
B: BeiDou
Example
AD2066-GP: AD2066 CPRS IP MODEM
Chapter 2 Installation Introduction
2.1 General
The IP MODEM should be installed correctly to make it work properly.
Warning: Forbid to install the IP MODEM when powered!

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 11 of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
2.2 Encasement List
Please take care of you when opening the packing material for future use.
Name
Quantity
Remark
IP MODEM host
1
Cellular Antenna（SMA Male）
1
Power adapter
1
RS232 data cable
1
RS485 data cable
1
Optional
Manual CD
1
Optional
Certification card
1
Maintenance card
1
GPS Antenna
1
Optional
2.3 Installation and Cable Connection
Dimension (The fixing piece is detachable): (Unit:mm)

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 12 of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
Installation of antenna:
Cellular antenna (Standard) GPS antenna (Optional)
Screw the SMA male pin of the cellular antenna to the female SMA interface of the modem

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 13 of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
with sign “ANT”.
Screw the SMA male pin of the GPS antenna to the female SMA interface of the modem
with sign “GPS”.
Warning: The cellular antenna and the GPS antenna can not be connected wrongly. And
the antennas must be screwed tightly, or the signal quality of antenna will be influenced!
Installation of SIM/UIM card:
Installation of SIM/UIM card
Firstly power off the modem, and press the out button of the SIM/UIM card out with a
needle object. Then the SIM/UIM card sheath will flick out at once. Put SIM/UIM card into
the card sheath (Pay attention to put the side which has metal point outside), and insert
card sheath back to the SIM/UIM card outlet.
Warning: Forbid to install SIM/UIM card when powered!
DB9 Interface Signal Definition
Pin Number
Signal Name
Default Function
Extensible Function
1
N/A
N/A
RS232 DCD/UART RX
2
RX
RS232 RX
N/A
3
TX
RS232 TX
N/A
4
N/A
N/A
RS232 DTR/UART TX
5
GND
RS232 GND
N/A

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 14 of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
6
A
RS485 anode
RS232 DSR/RS422 R+
7
N/A
N/A
RS232 RTS/RS422 R-
8
N/A
N/A
RS232 CTS/RS422 T-
9
B
RS485 cathode
RS232 RI/RS422 T+
Installation of cable:
RS232 cable（standard）
Ip Modem adopts industrial DB9 Female interface. The cables as is following.

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 15 of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
2.4 Power
Power adapter (Standard)
The power range of the IP MODEM is DC 5~35V
Warning: When we use other power, please ensure the stability of the power supply
(ripple less than 300mV, and the instantaneous voltage does not exceed 35V), and the
power supply is above 4W.
We recommend user to use the standard DC 12V/0.5A power adaptor.
2.5 Indicator Lights Introduction
There are three indicator lights: “Power”, “RUN”, “Online”,”GPS”(Optional).
Indicator Light
State
Introduction
Power
ON
IP MODEM is powered on
OFF
IP MODEM is powered off
RUN
BLINK
Data is communicating
OFF
No data
Online
ON
IP MODEM has logged on network
OFF
IP MODEM hasn’t logged on network
GPS
ON
Effective GPS
OFF
No Effective GPS

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 16 of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
Chapter 3 Configuration
3.1 Configuration Connection
Before configuration, please connect the IP MODEM with the configure PC by the
supplied RS232 or RS232-485 conversion cable as following.
3.2 Configuration Introduction
There are two ways to configure the IP MODEM:
Configuration software tool: All the settings are configured by the configure tool running
on PC.

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 17 of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
Extended AT command: In this configuration, the user only need to have a serial
communication program can configure all the parameters of the digital terminal, such as
WINDOWS HyperTerminal, LINUX minicom, putty, etc., or directly by the user's micro
controller system on the device.
Note: Before configuration with extended AT command, you should make IP MODEM
enter configure state.
The steps how to make IP MODEM enter configure state, please refer to appendix. Each
extended AT command should end with a carriage return.
3.3 Run the configure Tool: AR_IPModemConfigTool.exe
After the device is connected with the computer, run the configuration tool and select the
corresponding COM port, select 115200 baud rate with no parity (internal system fixed,
other settings are invalid), and then open the serial port, output information column will
give Prompt message:
Please open the serial port first with the correct parameters, then switch the device on.
Start worker...

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 18 of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
3.4 Re-power IP MODEM
After Re-power IP MODEM, configure tool will enter configure state. At the same time, the
software will load current settings. It’s ready to configure.

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 19 of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.

AD2000 IP Modem Specification
Tel:[phone] Fax:[phone] E-mail:[e-mail] Page 20 of 43
Web:en.alotcer.com Add:NO.146-148, 2nd XingBei Road, JiMei District, XiaMen, China.
3.5 Guide
Work mode: Select the mode of the device and default is TCP;
Baudrate: Configure the same Baudrate with terminal equipment;
Extend:Configure the same Extend parameter with terminal equipment;
Device ID:Each device with a unique ID that is distinguished and identified;
Device SIM:Number of SIM card inserted into the device. This item can be default and
does not affect actual use;
Main center:The server address and port to send the data. If there are no fixed IP
addresses, dynamic DNS can be used;
Backup center:When the main server network is blocked, the device will connect to the
backup center. Recommend to leave the backup IP and Port for blank.