Alpha ESS SMILE-BAT-10.3P Operating and maintenance instructions

QUICK INSTALLATION MANUAL
BATTERY MODULE
SMILE-BAT-10.3P

6 x M8*60
SMILE5-BAT
6 x M4*106 x M5*10
1 x manual8 x M6 washer 2 x power cord
(1 black, 1 red)
2 x Hanging hook

Disassemble the battery packaging and battery installation
Place the battery close to the wall
perpendicular to the floor and drill
holes in the wall using the impact drill
corresponding to the M8*60.
Open the battery pack.
+ -
1-1 2-1
1-2 Explosion-proof valve position
Explosion-proof valve
Use a Phillips screwdriver to attach the battery mounting hooks to
the battery top cover.
M5*10
Note: Please place a protective
layer on the battery when drilling to
prevent dust from falling into the
battery.
3-1

Connect the battery and
inverter using the power
cord (black) in the parts
list.
Wiring
Battery fixing and wiring
Remove the debris shutter and secure the battery to the wall with the
screws.
4-1
Connect the battery and inverter using the power cord (red) in the
parts list.
Step4
Step6 Step7
Step5
M8*60
M8*60
-
Take off the battery decorating panel and remove the
communication wiring barrier on the left side. Use the inverter's own
communication cable to connect to the battery communication port.
Lock all covers after all the above connections are completed.
5-1
6-1 7-1 7-2