Alpha ESS Backup Box V02 Operating and maintenance instructions

INSTALLATIONMANUAL
ENERGYSTORAGESYSTEM(ESS)
STORION-SMILE-T10(INDOOR)
QUICK INSTALLATION MANUAL
BACKUP BOX
V02
Alpha ESS Co., Ltd.
[phone]
[email protected]
www.alpha-ess.com
JiuHua Road 888, Nantong High-Tech Industrial
Development Zone, Nantong City, 226300
Alpha ESS Suzhou Co., Ltd.
[phone]
[email protected]
www.alpha-ess.com
Level 15,SIPC 158 Wangdun Road SIP Suzhou,
215028
Alpha ESS Europe GmbH
[phone]
[email protected]
www.alpha-ess.de
Paul-Ehrlich-Straße 1a, 63225 Langen, Hessen
Alpha ESS Australia Pty. Ltd.
[phone] (Sales)
[phone] (Technical Support)
[email protected]
www.alpha-ess.com.au
Suite 1, Level 1, 530 Botany Road, Alexandria,
NSW, 2015
Alpha ESS Italy S.r.l.
[phone]
[email protected]
www.alpha-ess.it
Via Loda,17-41013 Castelfranco Emilia(MO)
Alpha ESS Korea Co., Ltd
[phone]
[email protected]
2F, 19-4, Nohyeong 11-gil, Jeju-si, Jeju-do,
Republic of Korea
Alpha ESS UK Co., Ltd
[email protected]
Drake House, Long Street, Dursley, gl11 4hh
The backup box is a product of AlphaESS for switching on and off the grid.
Check the following parts list to ensure the package is complete.
A complete backup box system consists of:
SUMMARY 01
SUMMARY01
1.1. Parts List
Name Illustration Quantity
1 transfer 3 cable (for
SMILE5/SMILE-B3)
1
1
1
1
3
25
2
1 transfer 2
communication
connector
Meter patch cable
for backup box
Installation manual
Terminal
Cylindrical fuse
Fuse holder
Note: 1. Meter patch cable for backup box is different from backup patch cable for
backup box. Meter patch cable for backup box must be connected in the correct
place as the diagram shows.
2. We will install the cylindrical fuse in the fuse holder before shippment. Please
install the fuse part when installing the Backup Box.
1.2 Terminal Diagram
1.3 Technical Specification
Datasheet:
LED Status Indication
Figure 1: backup box Terminal Diagram
Phase
Display
Communication
Operating Temperature Range
Humidity
Protection Level
Dimension (W x D x H)
Warranty
Nominal Output Power
Grid Frequency
Nominal Current
Single Phase / Three Phase
LCD
RS-485
-20 ºC ~ 60 ºC
15% ~ 85%
IP20
208mm x 67mm x 127 mm
5 Years
20 kW
50/60 Hz
30 A *3
LED Display
PF
QF
Fault
Description
Active Power
Reactive Power
Communication Lost/Relay
SUMMARY
02
GRID_L1
LGRID_L2
GRID_L3
OFF
ON
COM

Note: Meter patch cable for backup box is different from backup patch cable for
backup box. Meter patch cable for backup box must be connected in the right place
as the diagram shows.
Note: Operated by qualified electrician only.
Note: The position where the fuse holder is installed in the distribution box is not
specified. The installer can adjust the installation position of the fuse holder
according to the actual installation scenario. The length of the related wire harness
on the fuse holder can be adjusted according to the actual needs. The terminals will
be in the parts list.
04SUMMARY 03
Communication Port RJ45
Fault
Backup
Grid
Communication Lost/Relay
Backup Normal
Grid Normal
Communication Cable Specification
Backup Box COM Inverter/EMS Meter Port
Meter Patch Cable for Backup Box
RJ45 Connector RJ45 Connector
CAT5 Recommended as Patch Cable
1
2
3
4
5
6
7
8
RJ45
Mode
Dimension
1.4 Installation of Fuse Holder
SMILE-T10 Connection
Mode System DIP Switch Description
Single Phase
Three Phase
Power Resumption
Latency Time 310s
Normal Power
Resumption
SMILE5/SMILE-B3
SMILE-T10
1
1
4
4
SMILE5/SMILE-B3/SMILE-T10
SMILE5/SMILE-B3/SMILE-T10
Turn on DIP switch 4
Turn off DIP switch 4.
Turn on DIP switch 1.
Turn off DIP switch 1.
Connect the power cables from BackupBox Load – L1, L2, L3 to the top of the fuse holder, and then
connect cables from the bottom to the load.
NC
NC
RS485-A (Backup for Storion-T5)
RS485-A (Meter)
RS485-B (Meter)
RS485-B (Backup for Storion-T5)
NC
NC
NC
NC
RS485-A
—
—
RS485-B
NC
NC
GRID_L2
GRID_L3
GRID_N
GRID_PE
Storion-
SMILET10
PV-INV
BACKUP AC
PV
PV
Bat
meter
LOAD3 LOAD2 LOAD1
GRID
DSP_BackupBox
BAK_N
AC_N
LOAD_N
BAK_L3
AC_L3
LOAD_L3
BAK_L2
AC_L2
LOAD_L2
BAK_L1
AC_L1
LOAD_L1
Ś
ś
PV-INV_PE
PV-INV_N
PV-INV_L3
PV-INV_L2
GRID_L1
PV-INV_L1
COM
patch cable
Meter Port
RCD
FUSE
meter patch cable
for backup box
N
PE
L3
L2
L1
GRID_L2
GRID_L3
GRID_N
GRID_PE
SMILE-B3
SMILE5
PV-INV
BACKUP AC
PV
PV
Bat
meter
LOAD3 LOAD2 LOAD1
GRID
DSP_BackupBox
BAK_N
AC_N
LOAD_N
BAK_L3
AC_L3
LOAD_L3
BAK_L2
AC_L2
LOAD_L2
BAK_L1
AC_L1
LOAD_L1
Ś
ś
PV-INV_PE
PV-INV_N
PV-INV_L3
PV-INV_L2
GRID_L1
PV-INV_L1
COM
Patch Cable recommend CAT5
Meter Port
RCD
FUSE
meter patch cable
for backup box
N
PE
L3
L2
L1
Note: 1. Hybrid coupled with ①and ②. DC coupled with ②. AC coupled with ①
2. The load power of each phase must be within 5kW.
06INSTALLATION 05
SMILE5/SMILE-B3 Connection (single phase grid in house)
GRID_L2
GRID_L3
GRID_N
GRID_PE
Storion-
SMILET10
PV-INV
BACKUP AC
PV
PV
Bat
meter
LOAD3 LOAD2 LOAD1
GRID
DSP_BackupBox
BAK_N
AC_N
LOAD_N
BAK_L3
AC_L3
LOAD_L3
BAK_L2
AC_L2
LOAD_L2
BAK_L1
AC_L1
LOAD_L1
Ś
ś
PV-INV_PE
PV-INV_N
PV-INV_L3
PV-INV_L2
GRID_L1
PV-INV_L1
COM
Patch Cable recommend CAT5
Meter Port
RCD
FUSE
meter patch cable
for backup box
N
PE
L3
L2
L1
GRID_L2
GRID_L3
GRID_N
GRID_PE
SMILE-B3
SMILE5
PV-INV
BACKUP AC
PV
PV
Bat
meter
LOAD3 LOAD2 LOAD1
GRID
DSP_BackupBox
BAK_N
AC_N
LOAD_N
BAK_L3
AC_L3
LOAD_L3
BAK_L2
AC_L2
LOAD_L2
BAK_L1
AC_L1
LOAD_L1
Ś
ś
PV-INV_PE
PV-INV_N
PV-INV_L3
PV-INV_L2
GRID_L1
PV-INV_L1
COM
Patch Cable recommend CAT5
Meter Port
RCD
FUSE
meter patch cable
for backup box
N
PE
L
①
②
①
②
Note: Hybrid coupled with ①and ②. DC coupled with ②. AC coupled with ①.
①
②
②
①
INSTALLATION
INSTALLATION
It is not allowed to connect the cable as the following :
Dimension
SMILE5/SMILE-B3 Connection (three phase grid in house)
Or/W
G/W
G/W
BI/W
Br/W
Br Br
Br/W
BI/W
Or Or
BI
G
G
BI
Or/W
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
RJ45 Connector RJ45 Connector
Or/W
G/W
BI
BI/W
Br/W
Br Br
Br/W
G
Or Or
G/W
BI/W
G
BI
Or/W
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
127
AC
GRID ON-GRID INV
N
PE N L3 L2 L1
BAKLOAD AC L3 BAK LOAD AC L2 BAK LOAD AC L1 BAK LOAD
208
45
46
67
OFF
ON
COM
OFF
ON
COM
INSTALLATION02