Alpha Professional Tools WSPKIT User manual

Part No: WSPKIT
Version 1
www.alpha-tools.com
Alpha® Wet Sanding
and Polishing Kit
Instruction Manual
MANUAL
*Tool sold separately

2
WSPKIT Overview........................................................................................................................2
Attaching the Water Hose Assembly ............................................................................................3
Attaching the WSPKIT to the Variable-Speed Grinder/Sander/Polisher.......................................3
Using the Hook & Loop Strap.......................................................................................................4
Installation of the GFCI.................................................................................................................4
TABLE OF CONTENTS
SERVICE
Use only Alpha Professional Tools®accessories and spare parts. Should components which have been
described need to be exchanged, please contact your dealer or Alpha Professional Tools®.
NEED MORE INFORMATION
For information on Alpha Professional Tools®complete product line, visit us on the web at www.alpha-tools.com.
CAUTION
• AttachtheWetSanding&PolishingKitcorrectlybyfollowingtheprocedureinthisinstructionalmanual.
• Duringoperation,besuretowearpersonalsafetyequipment.

3
ALPHA®WET SANDING & POLISHING KIT OVERVIEW
Adapter
Plastic Tie
Positioning Holes
Splash Guard
Loc-line Assembly
Memory Wrap
(3ft. / 1m)
Water Hose Assembly
(15ft. / 4.5m)
Quick Connect Adapter
GFCI

4
ATTACHING THE WATER HOSE ASSEMBLY
1. Attach and tighten the Water Hose Assembly onto the Adapter.
ATTACHING THE WSPKIT TO THE VARIABLE-SPEED GRINDER /
SANDER / POLISHER
Loc-line Assembly Water Hose Assembly
Adapter
Water Hose Assembly
Water Hose Assembly
Side Handle
Splash Guard
Loc-line Assembly
Electric Power Cord
Memory Wrap (3ft. / 1m)
Small Grinder
Large Grinder

5
INSTALLATION OF EASYON-EASYOFF SLEEVE
1. Wrap the EasyOn-EasyOff Sleeve around the Water Hose Assembly and electrical cord.
2. Finish the wrapping procedure until the entire EasyOn-EasyOff Sleeve is secured.
USING THE HOOK & LOOP STRAP(S)
NOTE: Use the Hook & Loop
Straps as necessary to attach the
hose assembly to the Variable-
Speed Grinder/Sander/Polisher.
NOTE: Position the straps away
from the vent ports of the Variable-
Speed Grinder/Sander/Pollisher.
Small Angle Grinder
Large Angle Grinder
Hook & Loop Strap
1-1/2”(W) x 12”(L)
Hook & Loop Strap
1-1/2”(W) x 18”(L)
Hook & Loop Strap
1/2”(W) x 12”(L)

INSTALLATION OF THE GFCI
1. Install the GFCI to the power tools power cord as shown. Connect to Power and check the
GFCI for proper function.
GFCI
TESTING IN-LINE GFCI UNIT
1. Connect GFCI to a single-phase AC power supply
2. Verify that the indicator lens shows red (indicating output voltage).
3. Press the test button to verify that the red in the indicator lens disappears.
4. Press the reset button to verify the red indicator is visible.
5. The GFCI is now ready to use.
RESET BUTTON
TEST BUTTON
• Indicator view lens.
• REDlensindicatespower
• CLEAR lens indicates no power

7
ALPHA®WSPKIT SCHEMATIC & PART LISTS
ITEM NO. PART NO. DESCRIPTION QUANTITY
1 133791 Splash Guard 1
2 140004 Loc-Line Assembly 1
3PDH-CABLETIES Plastic Tie 2
4 133780 Adapter (1/4 NPT>>>M10*P1.0) 1
5 210129 Water Hose Assembly (15ft./4.5m) 1
6 210124 Memory Wrap (3ft./1m) 1
7 133773 Quick Connect Adapter 1
8 GFCI-1 GFCI Plug (120V) 1
9 133551 Hook & Loop Strap (1/2”x12”) 1
10 140003 Hook & Loop Strap (1-1/2”x 12”) 1
11 140008 Hook & Loop Strap (1-1/2”x18”) 1
INSTALLATION OF THE QUICK CONNECT ADAPTER
1. Secure the Quick Connect Adapter to the Water Hose Assembly.

Copyright © 2019 Alpha Professional Tools. All rights reserved.
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: [phone]
www.alpha-tools.com