Installation
To connect your headset simply insert
the clear plug at the end of the headset cable
into your phone.
In-Line Connector
By disconnecting the In-Line Connector you
are able to place the call on hold whilst you
move away from the phone, simply
reconnecting the connector will allow you to
continue on with the call.
In-Line Mute
Push and hold the button on the In-Line
connector to mute the call, release the button
to resume two way conversation.
Helpful tips
For the best audio results, always position the
noise cancelling microphone approximately
20mm away from the corner of your mouth.
Don’t forget to attach the clothing clip to your
clothing so reducing the weight of the headset
cord on the headband.
