Jabra Elite 7 Pro User manual

Jabra Elite 7 Pro - Black
How do I pair my Jabra Elite 7 Pro/Active with my mobile
device?
To pair your headset with your mobile device or tablet, follow these
steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn on your earbuds by removing them from the charging case.
Alternatively, simultaneously press and hold (1 second) the Left and
Right buttons.
The LEDs on both earbuds will turn green.
3. To enter pairing mode, simultaneously press and hold (3 seconds) the
Left and Right buttons on the earbuds, until the LEDs on the earbuds
flash blue.
The earbuds are now ready to pair with your mobile device.
Note
If you want to use just one earbud, you must still pair both earbuds
with your mobile device. After the pairing, you can place one of the
earbuds in the charging case.
4. To pair, go to the Bluetooth menu on your mobile device and select
the Jabra Elite earbuds from the list. If the Jabra device is listed more
than once, select the entry showing the headphone icon. Enter
“0000” (four zeros) if you are asked for a pin code.
In daily use, when you turn on the earbuds, they will automatically
15/12/2023 23:57
https://www.jabraheadsets.ch/supportpages/jabra-elite-7-pro/100-99172000-
60/faq/917e2eae-5fb4-49d9-9d5e-b3fcef409320
Seite 1 von 2

reconnect with the last previously paired device, if it is turned on and
within range.
If pairing is not successful, try the pairing steps again, or try pairing with
a different Bluetooth device. For troubleshooting tips, see
here. Optionally, try using the Bluetooth Pairing Guide which provides
detailed steps for pairing with a mobile device.
15/12/2023 23:57
https://www.jabraheadsets.ch/supportpages/jabra-elite-7-pro/100-99172000-
60/faq/917e2eae-5fb4-49d9-9d5e-b3fcef409320
Seite 2 von 2