Alpine CDE-180R User manual

<
Cautions for Safe Repair Work>
The following cautions will prevent accidents in the workplace and will ensure safe products.
*The symbols indicate caution is needed to prevent injuries and damage to property.
The symbols and their meanings follow.
If you ignore this symbol and handle the product incorrectly or unsafely,
serious injury or death may result.
If you ignore this symbol and handle the product incorrectly or unsafely,
injury or only material damage may result.
*The following symbols indicate two levels of cautions.
When you see this symbol, you have to be very careful.
When you see this symbol, you have to follow the instructions there.
Do not look squarely into the laser light
Fuse Caution
coming from the pickup.
Always use a designated fuse.
You may loose you sight.
Use of an incorrect fuse may result in a fire.
Do not allow wiring to be caught in the
Battery Caution
screw/chassis.
Use the designated battery.
If wiring is caught in the screw/chassis, it may
Confirm the correct polarity and seat of the
cause a short circuit, resulting in a fire. battery.
An incorrect battery or an improperly connected
or seated battery may result in a fire.
High Temperature Caution
Designated Parts Caution
Touching the heat sink may cause severe burns.
Look up the part list and ensure that only
designated parts are used to prevent problems or
accidents.
Reverse Power Supply Connections or
Wiring Caution
Misconnections Caution
Ensure that the wiring is correct when rewiring to
Reverse power supply connections or
prevent problems with ignition/breakdown.
misconnections may cause ignition problems and
smoke may result.
Soldering Caution
Wear Gloves
Hot solder from solder splash may cause severe
Wear gloves to prevent electrical shocks or injury
burns.
from the end face of the metal.
Warning
Caution
Warning
Caution

X4
X2
X1
X1
X1
X1
TOP side
Packing Method View
NOSE side
Back
101
104
103
103
102-2
102-1
101-5101-4101-3101-2101-1

Mark
Model Code
#1
CDE
-
180R Only,
$1
CDE
-
180RR Only,
%1
CDE
-
180RM Only,
Others:Common.
NOTE:The part that has not PART NUMBER will not be supplied.
#####
IC5001(*) :51
-
17726Z01(MTP,TMPM330FDWFG
-
QT)
Software is not written in to the part indicated with (*).

101-1 03S60820Y16 SCR,MCH 5X8 ZN A
101-2 03S60824Y01 SCR,WEV 1.7X4 ZN A
101-3 07-24382Z01 BKT,RELEASE
101-4 16-26941Z01 CAP,RUBBER
101-5 03A60836Y01 SCR,CUS 5X7 ZN A
102-1 68-10334Z62 O/M-CDROM AOTH
102-2 68-24567Z14 C/N-QRG AOEU AOTH
103 09-25216Z02 ASSY,ATTC-0083-01A
104 15-24676Z01 CARRYING,CASE ASSY

CB401
CH5200
(1)
(2)
(1)
01V42111S01
(2)
01E38367S01
Extension Cable
*Always connect the Extension Cable when making checks of voltage and repair.

Analog
AudioProcessor
BD37033
(IC2001)
Main uCOM (IC5001)
Remote
Sensor
DIMMER
B-DET
A-DET
POWER CONN (16P)
Block Diagram
FL/FR/RL/RR
POWER-AMP
TB2959
(IC8000)
(IC8301)
A-MUTE/P-AMP On
Steering
Remote Jack
(IC5100)
STREM I/F
USB USB Data
USB Power
DCDC
AN33016
BATT
VDD+3.3V
A/D Key
8th Gen.
Bare Mech.
RESET
(IC8005)
EEPROM
BR24T02F
2KBit
(IC5002)
SYSTEM REG
AN34002A (IC8001)
Motor Driver
BD8226EFV
(IC1002)
USB Controller
TMP92CD28AFG
(IC1000)
(IC8601)
Oasis
TC94A92FG
(IC1001)
ACC
Serial communication +
/CS + RESET + STBY
RESET
SERVO 7V
LCD
BSIF
AUDIO+B
RL/RR
Tuner NXP
TEF6616
(IC6000)
I2C-BUS
Control
signal
+3.3V
TMPM330FDWFG (100)
LCD DRIVER
(PT16580)
(IC401)
FL/FR
VDD+5V
SERVO7V
LED+B
TUNER+B
AUDIO+B
A-DET B-DET
VDD+3.3V
MODE1,2
I2C-BUS
PNJ4L02M
(IC402)
LED
P.ANT/
O.REM
BATT
A-MUTE
SUB-W/REAR
FRONT
Rotary Encoder
AUX

Specifications
< FM RADIO >
Intermediate Frequency
150
±
0.1kHz
Frequency Range
87.5~108.0MHz
Usable Sensitivity (30dB S/N, Mono, at 98.1MHz)
17.2dBf
-
3dB Limiting Sensitivity (at 98.1MHz)
19.2dBf
Residual Noise (Ref. 1kHz, at 98.1MHz)
25
±
5dB
S/N Ratio (at 98.1MHz)
Stereo : 55dB
Mono : 60dB
Image Rejection (at 106.1MHz)
40dB
IF Rejection (at 90.1MHz)
60dB
Distortion (Input 60dB
µ
,
at 98.1MHz)
1%
Frequency Response (Ref. 400Hz, at 98.1MHz)
100Hz : 0
±
3dB
10kHz :
-
12
±
3dB
Stereo Separation (1kHz, at 98.1MHz)
25dB
PS Sensitivity (at 98.1MHz)
36.2dBf
< MW RADIO >
Intermediate Frequency
25kHz
Frequency Range
531~1,602kHz
Usable Sensitivity (20dB S/N, at 999kHz)
35dB
S/N Ratio (at 999kHz)
44dB
Image Rejection (at 1,404kHz)
50dB
IF Rejection (at 603kHz)
60dB
Distortion (at 999kHz)
1.0%
Frequency Response (Ref. 400Hz, at 999kHz)
100Hz :
-
3
±
4dB
2.5kHz :
-
5 +3/
-
5dB
< LW RADIO >
Intermediate Frequency
25kHz
Frequency Range
153~281kHz
Usable Sensitivity (20dB S/N, at 216kHz)
41dB
S/N Ratio (at 216kHz)
42dB
Image Rejection (at 270kHz)
40dB
IF Rejection (at 162kHz)
50dB
Distortion (at 216kHz)
1.5%
Frequency Response (Ref. 400Hz, at 216kHz)
100Hz :
-
3
±
4dB
2.5kHz :
-
5 +3/
-
5dB
< CD SECTION >
System
Optical (Compact Disc System)
Channel Balance (1kHz)
CD : TCD
-
782 : 0
±
3dB
MP3 : SCD
-
7885 (FOLDER5
-
128kbps) : 0
±
3dB
WMA : SCD
-
7885 (FOLDER10
-
128kbps) : 0
±
3dB
AAC : SCD
-
7885 (FOLDER2
-
128kbps) : 0
±
3dB
Distortion (1kHz)
CD : TCD
-
782 : 0.1%
MP3 : SCD
-
7885 (FOLDER5
-
128kbps) : 0.3%
WMA : SCD
-
7885 (FOLDER10
-
128kbps) : 0.3%
AAC : SCD
-
7885 (FOLDER2
-
128kbps) : 0.3%
Frequency Response (Ref. 1kHz, 0dB)
CD : TCD
-
782 : 17Hz : 0
±
3dB
127Hz : 0
±
2dB
10.007kHz : 0
±
2dB
19.997kHz : 0
±
4dB
MP3 : SCD
-
7885 (FOLDER5
-
128kbps) : 17Hz : 0
±
3dB
127Hz : 0
±
2dB
10.007kHz : 0
±
2dB
19.997kHz : 0
±
4dB
WMA : SCD
-
7885 (FOLDER10
-
128kbps) : 17Hz : 0
±
3dB

127Hz : 0
±
2dB
10.007kHz : 0
±
2dB
19.997kHz : 0
±
4dB
AAC : SCD
-
7885 (FOLDER2
-
128kbps) : 17Hz : 0
±
3dB
127Hz : 0
±
2dB
10.007kHz : 0
±
2dB
S/N Ratio
CD : TCD
-
782 : 70dB
MP3 : SCD
-
7885 (FOLDER5
-
128kbps) : 70dB
WMA : SCD
-
7885 (FOLDER10
-
128kbps) : 70dB
AAC : SCD
-
7885 (FOLDER2
-
128kbps) : 70dB
Separation (1kHz)
CD : TCD
-
782 : 65dB
MP3 : SCD
-
7885 (FOLDER5
-
128kbps) : 65dB
WMA : SCD
-
7885 (FOLDER10
-
128kbps) : 65dB
AAC : SCD
-
7885 (FOLDER2
-
128kbps) : 65dB
De
-
Emphasis (Ref. 1kHz, 0dB)
CD : TCD
-
782 : 4kHz :
-
20
±
3dB
16kHz :
-
20
±
3dB
< USB Audio (MEMORY) >
Channel Balance (1kHz, SCD
-
7885 (FOLDER2
-
128kbps))
0
±
3dB
Distortion (1kHz, SCD
-
7885 (FOLDER2
-
128kbps))
0.3%
Frequency Response
17Hz : 0
±
4dB
(Ref. 1kHz 0dB, SCD
-
7885 (FOLDER2
-
128kbps))
127Hz : 0
±
2dB
10.007kHz : 0
±
2dB
19.997kHz : 0
±
4dB
S/N Ratio (SCD
-
7885 (FOLDER2
-
128kbps))
70dB
Separation (1kHz, SCD
-
7885 (FOLDER2
-
128kbps))
65dB
< CD Deck Mechanism >
Test Disc
CD
-
DA : ALMEDIO* TCD
-
782
CD
-
R : ALMEDIO* TCD
-
R082LMR or TCD
-
R082LMY
CD
-
RW : ALMEDIO* TCD
-
W082W / TCD
-
W082L / TCD
-
W082H
(*
Former maker name : A
-
BEX,
New maker name : ALMEDIO)
RF Waveform Amplitude
1.2+0.7/
-
0.5Vp
-
p
Quantity of Jitter (3T standard deviation)
Less than 30.0nsec
Measurement Angle Range
Front and Rear :
-
20°~50°
Right and Left :
±
20°
Laser Current
Initial value
±
5mA
(
The initial value of laser current is indicated on the Flexible Cable.)
< Pickup >
Wave Length
795nm
Laser Power
CLASS I
< GENERAL >
Power Supply
14.4V DC
Power Output (T.H.D.10%, TCD
-
782 (1kHz, 0dB)) / Impedance
18W / ch / 4ohm
Pre Output (T.H.D.1%, TCD
-
782 (1kHz, 0dB)) / Impedance
6 +5/
-
2dBV / ch / 10k ohm
Back
-
up Current (ACC
-
OFF after 1 minute)
5mA
Dimensions (W x H x D)
Chassis : 178 x 50 x 164.7mm
Nose : 188 x 58 x 25.43mm
Weight
1.24kg
NOTE : Due to Continuing product improvement, specifications and designs are subject to change without notice.

< Special DISC Playability >
Judging standard : Confirm following track are done in play and there is no skip. (However, the interpolation noise is excluded.)
Item Use DISC Confirmation item
CD-DA Standard DISC ALMEDIO* TCD-782 at playing track #1 and track #23.
Eccentric DISC Playability ALMEDIO* TCD-713R at playing track #1 and track #15.
Vertical deviation DISC Playability ALMEDIO* TCD-732RA at playing track #16.
Scratch DISC ALMEDIO* TCD-721 at playing track #6. (1.2mm)
Black dot DISC ALMEDIO* TCD-726 or TCD-725B at playing track #10. (1.0mm)
Fingerprint DISC ALMEDIO* TCD-726 or TCD-725B at playing track #15. (ø75µm)
Inetrruption DISC ALMEDIO* TCD-726 at playing track #6. (1.0mm)
CD-R Standard DISC ALMEDIO* TCD-R082LMR at playing track #1 and track #23.
or TCD-R082LMY
Scratch DISC ALMEDIO* TCD-R021W at playing track #6. (1.2mm)
Black dot DISC ALMEDIO* TCD-R025W at playing track #10. (1.0mm)
Fingerprint DISC ALMEDIO* TCD-R025W at playing track #15. (ø75µm)
Eccentric DISC Playability ALMEDIO* TCD-R012W at playing track #1 and track #16.
Vertical deviation DISC Playability ALMEDIO* TCD-R032W at playing track #16.
CD-RW Standard DISC ALMEDIO* TCD-W082W at playing track #1 and track #23.
ALMEDIO* TCD-W082L
ALMEDIO* TCD-W082H
Scratch DISC ALMEDIO* TCD-W021W at playing track #10. (1.2mm)
Black dot DISC ALMEDIO* TCD-W025W at playing track #9. (0.7mm)
Fingerprint DISC ALMEDIO* TCD-W025W at playing track #15. (ø75µm)
Eccentric DISC Playability ALMEDIO* TCD-W012W at playing track #1 and track #16.
Vertical deviation DISC Playability ALMEDIO* TCD-W032W at playing track #16.
(* Former maker name : A-BEX, New maker name : ALMEDIO)

No ELEP COAT
No ELEP COATNo ELEP COAT
No ELEP COAT
MAIN
-P.W.Board
Orange Color Pattern:Component Side Pattern

No ELEP COAT
No ELEP COATNo ELEP COAT
No ELEP COAT
Orange Color Pattern:Component Side Pattern
MAIN
-P.W.Board

No ELEP COAT
No ELEP COATNo ELEP COAT
No ELEP COAT
FRONT-P.W.Board
Orange Color Pattern:Component Side Pattern
Blue Color Pattern:Foil Side Pattern

No ELEP COAT
No ELEP COATNo ELEP COAT
No ELEP COAT
Orange Color Pattern:Component Side Pattern
Blue Color Pattern:Foil Side Pattern
FRONT-P.W.Board