Alpine eX-10 User manual

English
Start Here.
Here’s how to use the eX-10
with your iPod®and Bluetooth phone.

2
Ready, set, go.
eX-10 in-car setup is quick and easy. First, place the display on the
dashboard in your field of vision. Then plug the power supply unit into
the cigarette lighter. Finally use the supplied Full Speed cable to con-
nect the eX-10 to your iPod®.
1
2
3

3
Set a frequency.
The eX-10 broadcasts audio to your car stereo just like an FM radio station.Tune to an
FM frequency on your radio where there is no radio station reception. Set the same
frequency on the eX-10 from ‘Transmitter’ in thesetup menu. Then, set the type of
audio output required. Access the setup menuand select ‘General’ and then ‘Output
Mode’. Select ‘Transmitter’ or ‘WireTransmitter’ depending on which method you
would like to use. Select ‘Wire Transmitter’ when you use FM switching box.

4
Choose your language.
Access the main menu via the SETUP switch on the remote control
and select ‘General’ and then ‘Language’. Select the language you
want to use for your song information.

5
Listen to your iPod®music.
Use the SEARCH button on your remote control to access your
search options. You can search by songs, artists, albums, playlists,
podcasts, audiobooks, composers and genres. When you find the
song you want, press ENTER and the song will start to play through
your car speakers.

6
See what’s playing.
You can select three display modes by pushing the VIEW button on
your remote. The first is the standard view, which shows the song,
artist and album, and a small picture of the album artwork. The sec-
ond shows the song name and an enlarged view of the artwork. The
third shows the song, artist and album names with no artwork.

7
Get the best sound.
You can pick one of ten equalizer presets for great sound with any
type of music. First select ‘Audio’ from the setup menu, then use the
LIST switch to select the desired EQ setting.

8
Place the microphone.
Secure the microphone in a convenient location in front of you so it
will pick up the sound of your voice. For example, on a pillar or on the
dashboard. Do not install the microphone in any position that could
interfere with the functionality of airbags in your vehicle. Consult your
local car dealer for more information.

9
Pair your Bluetooth phone.
Ready your Bluetooth enabled phone for pairing. Select ‘Pairing
Mode’ in the ‘Bluetooth’ menu, then search for the connection device
from your Bluetooth phone and enter the PIN code displayed on the
eX-10. When pairing is complete, ‘Paired’ will be displayed on the
eX-10. Next, complete the connection settings from your Bluetooth
phone. When connection is complete, ‘Connected’ will be displayed
on the eX-10.

10
Turn auto connection on.
To make the eX-10 automatically connect your phone when you enter
your car, turn on the automatic connection function. To do that, go to
the ‘Bluetooth’ menu and set ‘Auto Connect’ to ‘On’.