Alpine ALP423 Series User manual

STAINLESS STEEL
SOAP
DISPENSER
ALP423-SERIES
USER
GUIDE

Known in the industry for excellent products,
Alpine Industries is a manufacturer of innovative,
solution-based products for the commercial and
institutional markets worldwide.
Combining commitment to the customer, design innovation and
skilled, dedicated workforces, they have produced a range of
products that are an essential part of every commercial facility.
Every product is designed to the highest standards, enabling you
to get your requirements done in a reliable and cost-eective way.
THANK YOU
FOR YOUR PURCHASE.

1 Parts and Hardware
3 Installation
6 Maintenance Instructions
7 Limited Warranty
8 Disclaimer
Table of Contents

1
Parts and Hardware
A. Dispenser
B. Spout
C. Filler Door
A
C
B

2
Parts and Hardware
Tools Required (But Not Included):
• Screwdriver
• Pencil
• Drill
• Drill Bit
1. Mounting
Plate
3. Plastic Anchors (x3)
2. Screw (x3)
4. Key

3
Installation
STEP 1:
A. Locate the Dispenser (A) and ensure the Spout (B) is over the vanity:
B. Position the Dispenser (A) where you want to mount it.
C. Allow a minimum of 5” clearance between the top of the Dispenser (A)
and the bottom of your projected site. This allows you enough space to
fill the Dispenser (A).
A
B
B
A

4
Installation
STEP 2:
A. Place the Mounting Plate (1) against the wall and mark the holes with a
pencil where the Screws (2) will go.
B. Drill three holes and place the three Plastic Anchors (3) in them.
C. Mount the Mounting Plate (1) in a vertical position, with the wide part of
the “V” shape at the top.
D. The surface on which the unit is to be mounted determines the type of screws
required for optimal installation.
E. For plaster or hollow walls, use toggle bolts or expansion bolts.
F. For tile and marble wall, use fiber plugs.
G. Screw the three Screws (2) through the Mounting Plate (1) until secure.
3
1

5
Installation
STEP 3:
A. Insert a screwdriver through the Filler Door (C) from the front of the tank.
B. Loosen the screw inside the tank; do not fully remove.
C. Slide the Dispenser (A) into the Mounting Plate (1).
D. Position the Dispenser (A) against the wall, over the Mounting Plate (1)
and slide it down.
A
C
4

6
Installation
Maintenance Instructions
• To fill the Dispenser (A), open the Filler Door (C), and fill the Dispenser (A)
with soap.
• The Dispenser (A) can dispense liquid soaps, lotions and detergents.
• Do not use thick liquid, chloride, or high PH liquid soaps.
• Wipe the outside of the unit daily, including the Spout (B) using a damp cloth.
• Never use abrasive cleaners, only water-soluble cleaners.
• Periodically clean the inside of the Dispenser (A) by flushing it with
warm water mixed with soap from the Dispenser (A) through the Filler
Door (C) and Spout (B).
STEP 4:
A. Tighten the screw and close the Filler Door (C).
A
C

7
Limited Warranty
1. Alpine Industries (the company) warrants to the purchaser that the product will be free from
defects in workmanship and materials for a period of one (1) year from the date of purchase.
2. These warranties are not assignable or transferable to any other person.
3. Any damage to the product as a result of misuse, tampering, abuse, neglect, accident,
improper installation, modification, unauthorized service, destruction, or the alteration of
the serial number or use violates of the instructions furnished by the Company will void this
warranty.
4. The sole responsibility of the Company shall be limited to the repair or replacement (in its sole
discretion) of any component of the product which fails to conform to this warranty at no cost
to the purchaser for the period of the warranty.
5. Contact the Company directly to obtain service under this warranty. If it becomes applicable
to send a defective product to the Company, a Return Authorization Number must first
be obtained from the company. In order to obtain service under this warranty, purchaser
must provide the Company with the following items (a) proof of purchase, (b) police or fire
department report, (c) photographs of damaged sad, and (d) written testimonial.
6. Products shipped without prior Return Authorization and Return Authorization Number may
not be accepted, and the Company will not be responsible for their disposition and/or cost of
return to the owner.
7. The Company will not assume any responsibility for any loss or damage incurred in shipping.
All return authorized products should include a copy of the original invoice in order that this
warranty may be Honored.
8. This warranty is not an insurance policy. The Company is not responsible for any manner of
damage to or theft of the Purchaser’s product or its contents.
9. We recommend that the product being returned is accompanied by the sales receipt with all
relevant information regarding the purchase of the item and is returned to the Company within
ten (10) days of the claim date of purchase to validate this warranty.
10. Any implied warranties that the purchaser may have are limited to the duration of the
warranties described above. There are no further warranties that extend or apply beyond
the face hereof, and the company expressly disclaims and excludes any and all warranties of
merchantability or fitness for a particular purpose. Some states do not allow limitations on how
long an implied warranty lasts, so the above limitation may not apply to you.
11. Repair or replacement shall be the sole remedy for the purchaser under this warranty. The
company shall not be liable for any direct, indirect, incidental or consequential damages,
losses or expense arising from the use or misuse of the product. Some states do not allow the
exclusion or limitations of incidental or consequential damages, so the limitation may not apply
to you.
12. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.

8
Disclaimer
By purchasing products from Alpine Industries, the user agrees as follows:
TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCTS AND INFORMATION ON
THIS SITE IS PROVIDED “AS IS” AND WITH ALL FAULTS AND ALPINE INDUSTRIES. MAKES NO
PROMISES, REPRESENTATIONS, OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY,
OR OTHERWISE, WITH RESPECT TO THE PRODUCTS AND INFORMATION, INCLUDING ITS
CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE
OF ANY LATENT OR PATENT DEFECTS, AND ALPINE INDUSTRIES. SPECIFICALLY DISCLAIMS ALL
IMPLIED (IF ANY) WARRANTIES OF TITLE, MERCHANTABILITY, NON INFRINGEMENT, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, AND QUIET
POSSESSION. THE ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE PRODUCTS
AND INFORMATION LIES WITH USER.
TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL ALPINE INDUSTRIES
PRODUCTS OR ITS SUPPLIERS BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL,
INDIRECT, OR EXEMPLARY DAMAGES WHATSOEVER ARISING OUT OF OR IN ANY WAY
RELATING TO THIS AGREEMENT OR USER’S USE OF OR INABILITY TO USE THE PRODUCTS AND
INFORMATION, OR THE PROVISION OR FAILURE TO PROVIDE SUPPORT SERVICES, INCLUDING,
BUT NOT LIMITED TO, LOST PROFITS, LOSS OF CONFIDENTIAL OR OTHER INFORMATION,
BUSINESS INTERRUPTION, PERSONAL INJURY, LOSS OF PRIVACY, FAILURE TO MEET ANY DUTY
(INCLUDING OF GOOD FAITH OR REASONABLE CARE), NEGLIGENCE, COSTS OF PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES, OR ANY OTHER CLAIM FOR PECUNIARY OR OTHER LOSS
WHATSOEVER, OR FOR ANY CLAIM OR DEMAND AGAINST USER BY ANY OTHER PARTY, EVEN
IF ALPINE INDUSTRIES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THESE
LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY
LIMITED REMEDY.
NOTWITHSTANDING ANY DAMAGES USER MAY INCUR FOR ANY REASON WHATSOEVER
(INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED ABOVE AND ALL DIRECT OR
GENERAL DAMAGES), THE ENTIRE LIABILITY OF ALPINE INDUSTRIES AND ANY OF ITS SUPPLIERS
UNDER ANY PROVISION OF THIS AGREEMENT AND YOUR EXCLUSIVE REMEDY FOR ALL OF THE
FOREGOING SHALL BE LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID FOR THE
PRODUCTS AND INFORMATION OR U.S. $1. THE FOREGOING LIMITATIONS, EXCLUSIONS, AND
DISCLAIMERS SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, EVEN
IF ANY REMEDY FAILS ITS ESSENTIAL PURPOSE.
If any provision of this Agreement is declared invalid or unenforceable, the remaining provisions
of this Agreement will remain in eect. Alpine Industries has the right to modify these terms and
conditions at any time.

ALP423-SERIES
27 Selvage Street • Irvington, NJ • 07111 • © 2021 Alpine Industries.
alpineindustries.com