Alpine BAZ422 User manual

BAZ422
White Metal Garden Bench
with Butterfly Backrest
Limited Warranty Information
Thank you for choosing an Alpine product! We aim to please with our wide range of products
including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed
from the highest quality materials. In the event that we have not achieved our usual standard of
excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of
purchase, with the purchase date clearly indicated, must be provided. Photos of defective
merchandise will also be required to help distinguish the actual cause of the defect. Please read
below for a detailed description of warranty coverage.
• Water Damage
Alpine products are not manufactured to withstand extreme temperatures. Improper storage that
allows water to freeze within a product may cause damage and is considered negligence and
will, therefore not be covered under this warranty. The use of “hard water” and/or caustic cleaners
can affect the paint or other finishes. Failure to keep the unit clean, and use of such
additives/cleaners, will also void the warranty. Please note: for fountains, it is normal for some
splashing to occur and protecting the immediate surfaces is not the responsibility of Alpine
Corporation
• Paint & Color (Retention and/or Loss)
The use of water will cause natural erosion to the color. This area can be touched up using
standard paint. The paint is designed to protect the entire finish against breakdown of color. As
with any product, all finishes with time will gradually fade and discolor. The warranty will only
cover against severe or complete fading within the first year from date of purchase with the
above exclusion.
• Procedure/Service
Should a warranty/claim be needed, you should contact the retailer from whom you purchased
the product. If that is not an option, you can contact Alpine Corporation at www.alpine4u.com.
When contacting Alpine Corporation, you must be prepared to show proof of purchase, provide
photographs and any other information needed to validate your claim. This may be necessary
to distinguish between a partial or complete replacement of a defective product. The warranty
does not cover any items with multiple parts; the warranty will ONLY cover the individual
component of the unit/item that may be defective. Replacement parts can be made available to
a consumer through the original selling party, or an approved parts retailer. If this is not an
option, contact our customer service department. Item is covered under one year limited
warranty from the date of purchase. If your purchase was after our 30-day grace period,
payment information will be requested for shipping charges.
• Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to
1. Inadequate care and/or neglect
2. Environmental and/or natural elements
3. Immersion in water, unless specified
4. Improper Installation/Storage and/or Maintenance
This warranty is void if the product has been damaged by accident, misuse, negligence, improper
installation and/or modifications have occurred. This includes any and/or all defects arising out of
freezing water damage, hard water damage, failure to keep the unit clean and free of harmful
additives such as bleach, chlorine, etc…. which affects the paint and/or parts. This warranty also
does not cover any additional charges or installation, removal, disposal and/or shipping costs or
consequential damage associated with any warranty claim.
V1.0
3

Assembling & Using Your Product
Unpack all components carefully. Please check to ensure all parts have
been removed from the packaging.
Components:
Assembly:
Stand the Left Side Panel (B) upright and align with the left side of
the Seat (A). Insert the three bolts on the left side of the seat with the
two upper tabs at the back of the side panel and middle tab on the
front Left Side Panel (B). Place Cap Nuts (E) on all three bolts and
tighten securely with the Wrench (F).
Repeat the process with the Right Side Panel (C) on the right end of
the Seat (A).
Align the bolt on one end of Support Bar (D) with the tab at the bottom of
the Left Side Panel (B). Place a Cap Nut (D) on the bolt and tighten
securely with the Wrench (E). Repeat on the right side.
Congratulations. Your bench is now completely assembled.
Place it in a relaxing setting and enjoy!
Troubleshooting
If you have any questions or problems, please contact the retail store
where you purchased this Bench.
1
2
B
Left Side Panel
1x
C
Right Side Panel
1x
F
Wrench
1x
2
1
A
Seat
1x
D
Support Bar
1x
E
Cap Nuts
8x
3
1
2
2
1
3
3