Courtyard Creations RUS0188-WM User manual

1
PART
NO. PART NO.
PARTS LIST RUS0188-WM
Attention:
Make sure that each bolt needed for all steps match the
corresponding figure to ensure proper assembly.
STEP 1:
Insert the right and left arms (#1 and #2) into the cross braces (#3)
on both sides. Fasten them together by using bolts (#6), washers
(#9), and plastic nuts (#10). Keep the bolts loose. See Figure 1.
NOTE:
1. The labels marked “L” and “R” on the arms (#1 and #2) should
coincide with Figure 1 to ensure proper assembly.
2. The arrows mark on the right and left arms (#1 and #2) must
coincide with Figure 1 to ensure proper assembly.
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PAGE 1 OF 2 COURTYARD CREATIONS INC.
Do not discard any of the packaging until you have checked that you have all the parts and pack of fittings.
Keep children away during assembly. This item contains small parts which can be swallowed by children.
Children should always be under direct adult supervision while using the product.
Retain the assembly instructions for future reference.
Please quote following FQC NO. when contacting service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
!
!
!
!
STOP DON’T RETURN TO STORE!
MATERIAL CODE MATERIAL CODEPART PARTQ’TY Q’TY
2
3
4
5
6
7
1
1 9
84
2
1
1
#6 BOLT M6*30
Arm
assembly
FIGURE 1
L
R
RUS0188-CS01
RUS0188-CS02
62RUS023DH101
RUS0175-CS02
RUS0188-CS03
17C01A0710002Y4
17C01A0719072Y4
17C01A0726011Y4
17FA05040301-Y4
1800C23001
1800337002
61R0188C00001BA
17KAA0201----Y4
17KAB1101----Y4
RIGHT ARM
LEFT ARM
CROSS BRACE
BOTTOM FRAME
SEAT ASSEMBLY
BOLT M6*30
BOLT M6*80
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
BOLT CAP M6
CUSHION
HEX.KEY WRENCH 6MM
NUT WRENCH 10&13MMBOLT M6*55
32
12
16
2
1
1
4
4 14
13
12
11
10

FRONT
HIGHER TUBE
#7 BOLT M6*55
FIGURE 4
FIGURE 3FIGURE 2
#8 BOLT M6*80
FIGURE 5
STEP 2:
Place the arm assembly on to the bottom frame (#4). Ensure that the
higher tube on the bottom frame (#4) is facing the front of the glider.
See Figure 2.
STEP 3:
Fasten the swing bars of the arm assembly to the bottom frame (#4)
by using bolts (#7), washers (#9), and plastic nuts (#10). Keep the
bolts loose. See Figure 3.
STEP 4:
Place the seat assembly (#5) on to the arm assembly.
See Figure 4.
STEP 5:
Fasten the seat assembly (#5) to the right and left arms (#1 and #2)
by using bolts (#8), washers (#9), and plastic nuts (#10). See Figure 5.
Completely tighten all of the bolts and cover them with bolt caps (#11).
See Figure 5.
STEP 6:
Place the cushions (#12) onto the seat assembly. Fasten the cushions
to the seat assembly by using the velcro straps. See Figure 6.
Cleaning and Maintenance
• Wash fabric and frame parts with mild soap and water, rinse
thoroughly, and dry frame completely. Do not use bleach, acid, or
other solvents on the fabric or frame parts.
• Cushions may be washed on the surface only by using mild soap
and water or commercial foaming upholstery cleaner if necessary.
If washed, rinse well and hang dry. Do not machine wash or dry.
• We recommend the use of furniture covers to protect your glider
when not in use.
• Please inspect and tighten all bolts or fasteners on a regular basis
to ensure proper performance and safety of your glider.
• In order to prolong the life and beauty of your glider, we recommend
that it be stored in a dry and protected area during off season periods.
FIGURE 6
PAGE 2 OF 2
STOP DON’T RETURN TO STORE!

Missing A Part?
No Need To Go Back To
TheStore!
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
Call Toll Free
TEL: [phone]
FAX: [phone]
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free
TEL: [phone]
FAX: [phone]
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
SHOULD YOU NOTLOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECTALL
PACKING MATERIAL FOR ANYSMALL PARTSTHAT MAYHAVEBECOME
SEPARATED IN SHIPMENT.
SHOULD YOU EXPERIENCEANY DIFFICULTYDURING ASSEMBLYOR IF ANY
PARTIS MISSING OR DAMAGED,PLEASE CALL THE HELP LINE 1-877-539-7436
BEFORERETURNING THEITEM TO THESTORE.
PLEASE PROVIDE THEFOLLOWING INFORMATION:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS LIST
SHOWN ON ASSEMBLY INSTRUCTIONS.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS PRODUCT
TO THERETAILER.