Alpinter XPERT 24 Manual

CONTENT full set :
This bag CONTENT:
48m2
XPERT
TENT
1/9
BAG
HUB-24-V1.5 Specifications & design may be altered without notice due to continuous product development.
CONTENT : 1/9
2/9
V3.6
SETUP INSTRUCTIONS
Needed to assemble
All rights reserved. Specifications & design of the product may be altered without notice due to continuous product development. No part of this document may be reproduced or used in any form without the express written permission of Alpinter SA. © 2018 Alpinter SA
36 m2
Nr. S9999999
UN46530076
24 m2
Nr. S9999999
UN46530075
72 m2
Nr. S9999999
UN 46530095
Nr. S9999999
UN46530085
48 m2
Production date: See box
https://www.alpinter.com/download/

CONTENT - 02
CONTENT
1.
24 m236 m248 m272 m2
CABLE WITH SOCKET,
PLUGS AND SWITCHES
(WITH RIP-TIE) 1 x 1 x 1 x 1 x
POWERSTRIP 4 SOCKET
WITH 30 MA PROTECTION < 30 MS
5 M CABLE - IP44 1 x 1 x 1 x 1 x
LED BULB 9 W / 220 V - E27 - 800 LM 2 x 2 x 2 x 2 x
LED BULB 13 W / 220 V - E27 - 1400 LM 6 x 11 x 16 x 26 x
POWER EXTENSION CORD - 5 M 1 x 1 x - -
POWER EXTENSION CORD - 10 M - - 1 x 1 x
V
W
U
S
XPERT
CONNECT

DESCRIPTION - 03

SETUP INSTRUCTIONS - 04
01
MAIN
ENTRANCE REAR
PLACE the lighting kit on the ground,
in the correct position under the frame.
STEP
1/2
This setup instruction is an example, based on the setup of the Electrical Lighting Kit
for XPERT tent 48m2. Electrical Lighting Kits for other models (XPERT CONNECT or
other tent sizes) can be set up following the same steps.
2.
SETUP INSTRUCTIONS

SETUP INSTRUCTIONS - 05
Go back to your add-on setup instruction.
02
03 03 bis
2
12
1
1 First
Last
2
3
4
FRONT REAR
W
01
STEP
1/2
STEP
2/2
02
05
03
03
04
Go back to Or continue this setup
if your tent is already built
2/3
18
SETUP INSTRUCTIONS
5 x
06
2 x
S
16 x
W
S
S
WW
WW
WW
W
W
W
W
W
U
2
12
1
1 First
Last
2
3
4
FRONT REAR
W
01
STEP
1/2
STEP
2/2
02
05
03
03
04
Go back to Or continue this setup
if your tent is already built
2/3
18
SETUP INSTRUCTIONS
5 x
06
2 x
S
16 x
W
S
S
WW
WW
WW
W
W
W
W
W
U
If you have
or
Or continue this setup if your tent is already
built.
First
START HERE
Example of XPERT 48 Electrical Lighting Kit
Attach all RIP-Tie cable wraps to the FRAME.
START at CENTER of the RIDGE,
continue attaching Rip-Ties
to the ridge and roof poles.
Finish with plug and switch cable.
Go back to your
TENT SETUP MANUAL

SETUP INSTRUCTIONS - 06
04
Attach remaining STRAPS to the FRAME
2
12
1
1 First
Last
2
3
4
FRONT REAR
W
01
STEP
1/2
STEP
2/2
02
05
03
03
04
Go back to Or continue this setup
if your tent is already built
2/3
18
SETUP INSTRUCTIONS
5 x
06
2 x
S
16 x
W
S
S
WW
WW
WW
W
W
W
W
W
U
2
12
1
1 First
Last
2
3
4
FRONT REAR
W
01
STEP
1/2
STEP
2/2
02
05
03
03
04
Go back to Or continue this setup
if your tent is already built
2/3
18
SETUP INSTRUCTIONS
5 x
06
2 x
S
16 x
W
S
S
WW
WW
WW
W
W
W
W
W
U
STEP
2/2
Example of XPERT 48 Electrical Lighting Kit

SETUP INSTRUCTIONS - 07
05
Screw in BULBS
and all inside the tent
outside the tent
Example of XPERT 48 Electrical Lighting Kit
13 w
9 w

SETUP INSTRUCTIONS - 08
12
V
06
07
Connect to the grid
Go back to your to finalise you tent setup.
TENT SETUP MANUAL

AVAILABLE TENT ADD-ONS FOR XPERT 48 M2- 09
3.
AVAILABLE TENT ADD-ONS FOR XPERT Tents
2 x = 24 m2
3 x = 36 m2
4 x = 48 m2
6 x = 72 m2

AVAILABLE TENT ADD-ONS FOR XPERT 48 M2- 10
3.
AVAILABLE TENT ADD-ONS FOR XPERT Tents

HEAD OFFICE
ALPINTER BELGIUM
CHARLES DE GAULLESTR. 7
B-9600 RENAIX - RONSE | BELGIUM | EUROPE
Tel: [phone]
REGIONAL OFFICES
ALPINTER BULGARIA
35-37 KLOKOTNITZA ST | AP.1
1233 | SOFIA
BULGARIA
ALPINTER DUBAI
INTERNATIONAL HUMANITARIAN CITY
BUILDING N° 1 | SECOND FLOOR | OFFICE 207
DUBAI INDUSTRIAL CITY | PO BOX 506047
DUBAI | U.A.E. | MIDDLE EAST
ALPINTER UGANDA
PLOT 224-226, KYEYUNE ROAD | KIGGUNDU ZONE
KANSANGA | PO BOX 25525
KAMPALA | UGANDA | EAST AFRICA
ALPINTER ASIA
ALPINTER ASIA LTD.
RM 1902, HUA FU COMMERCIAL BLD.
111 QUEENS ROAD WEST
SHEUNG WAN | HONG KONG | ASIA
PRODUCTION SITE & PARTNER
[e-mail] | www.alpinter.com
4.
CONTACT
CONTACT - 11