Altimium MC61-BYOD User manual

MC61-BYOD
Multiformat Presentation Switcher
All Rights Reserved
Version: MC61-BYOD
User Manual

Multiformat Presentation Switcher
Preface
Read this user manual carefully before using the product. Pictures shown in this manual
are for reference only. Different models and specifications are subject to real product.
This manual is only for operation instruction, please contact the local distributor for
maintenance assistance. The functions described in this version were updated till
August, 2018. In the constant effort to improve the product, we reserve the right to make
functions or parameters changes without notice or obligation. Please refer to the dealers
for the latest details.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.

Multiformat Presentation Switcher
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
⚫Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
⚫Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
⚫Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
⚫Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
⚫Refer all servicing to qualified service personnel.
⚫To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
⚫Do not put any heavy items on the extension cable in case of extrusion.
⚫Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
⚫Install the device in a place with fine ventilation to avoid damage caused by
overheat.
⚫Keep the module away from liquids.
⚫Spillage into the housing may result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module immediately.
⚫Do not twist or pull by force ends of the optical cable. It can cause malfunction.
⚫Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
⚫Unplug the power cord when left unused for a long period of time.
⚫Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

Multiformat Presentation Switcher
Table of Content
1. Product Introduction ................................................................................................1
1.1. Features...............................................................................................................1
1.2. Package List.........................................................................................................1
2. Specification .............................................................................................................2
3. Panel Description .....................................................................................................3
3.1. Front Panel...........................................................................................................3
3.2. Rear Panel...........................................................................................................4
4. System Connection ..................................................................................................5
4.1. Usage Precaution.................................................................................................5
4.2. Bracket Installation...............................................................................................5
4.3. System Diagram...................................................................................................7
4.4. System Operation.................................................................................................8
5. Firmware Upgrade ....................................................................................................9
6. Panel Drawing.........................................................................................................10
7. Troubleshooting & Maintenance ...........................................................................11
8. Customer Service ...................................................................................................12

Multiformat Presentation Switcher
1
1. Product Introduction
The MC61 BYOD is a Multiformat Presentation Switcher converting AV signal from
Lightning, USB-C, MINI DP, DP, HDMI type-A and HDMI type-D to HDMI.
The BYOD is a green low energy consumption product which has a various application
in different places, such as classroom, small meeting room, lecture hall, and etc.
1.1. Features
⚫Supports Lightning, USB-C, MINI DP, DP, HDMI type-A, and HDMI type-D input
signals to be converted to HDMI signals.
⚫Auto-detects the input signal, the last connected signal source will be switched to the
output automatically.
⚫Starts to scan from Lightning to HDMI type-D and switch the first detected source to
the output.
⚫Supports HDMI, DP and USB input video resolution up to 4Kx2K@30 Hz.
⚫Supports HDMI output video resolutions up to 4Kx2K@30Hz 4:4:4.
⚫The Lightning device can be powered over the Lightning cable.
1.2. Package List
⚫1x BYOD
⚫1x Power Adapter (24V DC, 1.25A)
⚫1x Mounting Bracket
⚫1x USB-A to Micro-USB Cable
⚫1x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.

Multiformat Presentation Switcher
2
2. Specification
Input
Connector Type
(1) Lighting, (1) Type-C USB, (1) Mini DP, (1) DP,
(1) Type-A HDMI, (1) Type-D HDMI
Lighting Video Resolution
Up to 1080P@60Hz
USB-C Video Resolution
Up to 4Kx2K@30Hz
DP Video Resolution
Up to 4Kx2K@30Hz
HDMI Video Resolution
Up to 4Kx2K@30Hz
HDMI Version
1.4
HDCP Version
2.2
Video Bandwidth
10.2Gbps
Output
Connector Type
Type-A HDMI
HDMI Version
1.4
HDCP Version
1.4
Video Resolution
Up to 4Kx2K@30Hz 4:4:4
General
Operation Temperature
-10 ~ +55℃
Storage Temperature
-25 ~ +70℃
Relative Humidity
10% ~ 90%
Input Power
24V DC 1.25A
AC Adapter Input Power
100 ~ 240V AC, 50/60 Hz
Dimension (W*H*D)
135mm x 135mm x 30mm; Cable Length:1.3m
Net Weight
770g (Including cables)

Multiformat Presentation Switcher
3
3. Panel Description
3.1. Front Panel
HDMI AUSB - C DP full sized HDMI type-D
12345 6
①Lightning port to connect iOS device, such as iPhone or iPad with charging
capability.
②USB-C port to connect MacBook, Chromebook or other devices with SlimPort
output.
③Mini DP port to connect Mac MINI or other devices with Mini DP output.
④DP port to connect the device with DP output.
⑤Type-A HDMI port to connect the device with HDMI output.
⑥Type-D HDMI port to connect the device with HDMI type-D output.

Multiformat Presentation Switcher
4
3.2. Rear Panel
1080P
RES.
4K
SERVICE DC 24V
123456
①Security lock slot for Kensington lock installing.
②Micro-USB port for firmware upgrade.
③DIP switch for setting the HDMI output resolution as 4K or 1080P base on the EDID
of connected display and source.
EDID of Display
Source
DIP Switch Status
HDMI Output Resolution
4K
1080P
1080P
1080P
4K
4K
1080P
1080P
4K
1080P
4K
4K
4K
4K
4K
4K
1080P
1080P
1080P
1080P
1080P
1080P
4K
1080P
1080P
4K
4K
1080P
1080P
4K
1080P
1080P
④Type-A HDMI port to connect display.
⑤The bicolor indicator:
⚫Red when DC power source is connected.
⚫Green when one valid signal source is detected.
⑥Power port for 24V DC 1.25A power adapter.

Multiformat Presentation Switcher
5
4. System Connection
4.1. Usage Precaution
⚫Make sure all components and accessories included before installation.
⚫System should be installed in a clean environment with proper temperature and
humidity.
⚫All of the power switches, plugs, sockets, and power cords should be insulated and
safe.
⚫All devices should be connected before power on.
4.2. Bracket Installation
If the BYOD will be permanently mounted to a surface, the included bracket can be
mounted to lock the unit according the below procedures.
①Take out the bracket and self-tapping screws from the package.
②Fix the bracket to a surface by using three self-tapping screws.
Self-tapping screws

Multiformat Presentation Switcher
6
③According the below installing direction arrow to insert the BYOD to bracket.
Front Panel
Rear Panel

Multiformat Presentation Switcher
7
4.3. System Diagram
HDMI AUSB- C DPfu ll s ized HDMI typ e-D
1080P
RES.
4K
SERV ICE D C 24V
USB-C
Cellphone/PAD
iPad MacBook Mac Mini PC Graphics card Laptop
TV
1080P
RES.
4K
SERVICE DC 2 4V
Preview

Multiformat Presentation Switcher
8
4.4. System Operation
①Connect TV to the HDMI output on the rear panel.
②Power on TV and the switcher, and then the TV will show “Please connect your
device”. If the switcher doesn’t detect any source within 10 minutes, it will
automatically turn off TMDS.
③If the switcher is back to work or detect source input, it will auto turn on TMDS, and
the TV will show “Switching, please wait”.
Notes:
⚫The system diagram shown in this manual is for reference only.
⚫The last connected source will be automatically switched to output.
⚫Start to scan from 1 (Lightning) to 6 (HDMI type-D) and switch the first detected
signal source to the output only if there is no active source.

Multiformat Presentation Switcher
9
5. Firmware Upgrade
Notes:
⚫Firmware should be in USB storage Home Directory and its name is MERGE.bin.
⚫Do not remove the USB cable from BYOD during the firmware upgrade.
⚫Firmware upgrade process takes around up to 90 seconds until reboot.
Steps:
⚫Connect the USB storage to the BYOD service port with micro-USB to USB-A cable.
⚫Plug power cable into the BYOD.
⚫The BYOD will update firmware automatically. It will output OSD to indicate firmware
process on the display, and the power indicator blinks red.
⚫The BYOD will automatically reboot when the upgrade is completed. The red power
indicator normally keeps on.
⚫Remove the USB cable.

Multiformat Presentation Switcher
10
6. Panel Drawing
1080P
RES.
4K
SERVICE DC 24V
HD MI AUS B - C DP f ull si zed HD MI ty pe-D
135.00 mm
135.00 mm 30.00 mm

Multiformat Presentation Switcher
11
7. Troubleshooting & Maintenance
Problems
Potential Causes
Solutions
Color losing or no video signal
output in HDMI display.
The connecting
cables may not be
connected correctly or
it may be broken.
Check whether the cables
are broken or connected
correctly and in working
condition.
No HDMI signal output in the
device while local HDMI input is
in normal working state.
Output image with snowflake.
POWER indicator doesn’t work
or no respond to any operation.
Loose or failed power
cord connection.
Ensure the power cord
connection is good.
Static becomes stronger when
connecting the video
connectors.
Bad grounding.
Check the grounding and
make sure it is connected
well.
Note: If your problem still remaining after following the above troubleshooting steps,
please contact your local dealer or distributor for further assistance.

Multiformat Presentation Switcher
12
8. Customer Service
The return of a product to our Customer Service implies the full agreement of the terms
and conditions hereinafter. There terms and conditions may be changed without prior
notice.
1) Warranty
The limited warranty period of the product is fixed three years.
2) Scope
These terms and conditions of Customer Service apply to the customer service
provided for the products or any other items sold by authorized distributor only.
3) Warranty Exclusion
⚫Warranty expiration.
⚫Factory applied serial number has been altered or removed from the product.
⚫Damage, deterioration or malfunction caused by:
✓Normal wear and tear.
✓Use of supplies or parts not meeting our specifications.
✓No certificate or invoice as the proof of warranty.
✓The product model showed on the warranty card does not match with the
model of the product for repairing or had been altered.
✓Damage caused by force majeure.
✓Servicing not authorized by distributor.
✓Any other causes which does not relate to a product defect.
⚫Shipping fees, installation or labor charges for installation or setup of the product.
4) Documentation
Customer Service will accept defective product(s) in the scope of warranty coverage
at the sole condition that the defeat has been clearly defined, and upon reception of
the documents or copy of invoice, indicating the date of purchase, the type of
product, the serial number, and the name of distributor.
Remarks: Please contact your local distributor for further assistance or solutions.