Altius ATHUDW-SCA User manual

athudw-sca
car head up display
with wireless charging
user guide

2
We hope you enjoy your purchase!
ALTIUS products are carefully designed and produced to the
highest standards of performance and safety, backed by our
comprehensive 1 Year Warranty.
This user guide will provide all the information required for
you to setup and use your new product.
welcome

3
contents
Welcome 2
General Safety Warnings 4
Product Overview 6
Operation 8
Troubleshooting 10
Specications 11
Compliance and Responsible Disposal 12

4
general safety warnings
This product complies with Australian Safety
Standard AS/NZS 62368.1 to ensure the safety
of the product.
Plastic wrapping can be a suocation hazard for babies and
young children, so ensure all packaging materials are out of
their reach.
To prevent environmental factors (dampness, dust, food,
liquid etc.) harming the product, only use it in a well-
ventilated, clean and dry environment, away from excessive
heat or moisture.
Keep the product away from direct sunlight or heat sources.
In case of damage, do not disassemble, repair or modify
the product yourself. Contact After Sales Support for advice
on repair or replacement, or refer servicing to qualied
personnel only.
Children should be supervised to ensure they do not play
with the product.
Do not place or store appliance where it can fall or be
pulled into a bath or sink.

5
This product is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the product by a person responsible for their safety.
Do not expose the product to microwaves.
Clean using a dry cloth only - do not use water or
chemicals.
Keep the product away from oils, chemicals or any other
organic liquids.
Use this appliance only for its intended purpose as
described in this guide.
caution
Do not adjust the head up display whilst driving.

6
A. Car Head Up Display
B. Anti Slip Base
C. Micro USB Cable
What’s in the box:
product overview
D. User Guide
E. Warranty Certicate

7
1. Reective display lens
2. Adjustable hinges
3. Wireless charging anti slip pad
2
3
4
5
6
4. Micro USB port
5. LED indicator
6. Anti slip base
1

8
operation
1. Remove the protective lms
o the reective display
lens, ensuring that the side
with the blue lm is facing
towards you.
2. Insert the reective display
lens onto the hinges,
ensuring the side with the
blue lm is facing inside
and the side with the clear
lm is behind.
3. Remove the protective lm
o the anti slip base and
place onto desired location
on car.
4. Place the head up display
on top of the anti slip base.
5. Turn on your desired
Head Up Display app
(or download on the App/
Google Play store if you
don’t already have one)
and place onto the wireless
charging anti slip pad.
6. Your smartphones display screen can now be viewed
through the reective display lens.

9
The head up display can also wireless charge your
smartphone.
1. Connect the supplied micro USB cable to the micro
USB port on the unit. Connect to your car’s cigarette
lighter socket using an adaptor (not included).
2. Place your smartphone facing up on the wireless
charging anti slip pad.
3. When the smartphone is charging, the colour of the
LED indicator reects the charging status:
Red - Ready to charge
Blue - Charging
Red (ashing) - Error. Metal or other object on the pad
or smart phone does not support wireless charging.
4. If it doesn’t start charging, try adjusting the position
and/or remove your smart phone case.
Your smartphone must support wireless
charging for this function to work.

10
troubleshooting
problem solution
Wireless
charging not
working
• Check that your smart phone
supports wireless charging
• Adjust the position of the smart
phone to the centre of the wireless
charging/anti slip pad.
• Remove the smart phone case.
• Check and remove any metal or other
objects between the mobile phone
and wireless charging/anti slip pad.
• Make sure you are connected to a
power source.
Entire
smartphone
screen
not being
reected
• Adjust the hinges of the product until
the full display can be seen.

11
specifications
Power input 5VDC 2A
Wireless charging power
output 5W
Dimensions 150 x 95 x 24 mm
Weight 156 g

12
compliance and responsible disposal
Packaging
The packaging of your product has been selected from
environmentally friendly materials and can usually be recycled.
Please ensure these are disposed of correctly. Plastic wrapping
can be a suffocation hazard for babies and young children, please
ensure all packaging materials are out of reach and are safely
disposed of. Please recycle these materials rather than throwing
them away.
Product
At the end of its working life, do not throw this product out with
your household rubbish. An environmentally friendly method of
disposal will ensure that valuable raw materials can be recycled.
Electrical and electronic items contain materials and substances
which, if handled or disposed of incorrectly, could potentially be
hazardous to the environment and human health.
This product complies with the Australian Safety Standard
AS/NZS 62368.1 to ensure the safety of the product.

13
notes

14
notes

15
notes

customer helpline au:
1300 886 649
distributed by:
tempo (aust) pty ltd,
po box 6056,
frenchs forest
dc 2086