Altronix NetWay1512 User manual

More than just power.TM
Rev. 042109
I.T.E. 43KC
Adapters for Non-PoE
Compliant IP Devices
Installation Guide
Models Include:
NetWay1512
- 12VDC/15W adapter for non-PoE compliant IP devices
NetWay3012
- 12VDC/30W adapter for non-PoE compliant IP devices

- 2 - NetWay1512 / NetWay3012
Overview:
Altronix NetWay1512 and NetWay3012 adapters convert PoE or PoE+ into a 12VDC output and pass IP data.
Specifications:
Features:
Installation Instructions:
NetWay1512/NetWay3012 is compatible with PoE+ switches or midspans. The unit is not intended to be con-
nected to outside plant leads.
NetWay1512 for 12VDC IP Devices up to 15W:
1. Mount NetWay1512 in proximity to IP device (Fig. 1, pg. 2). Affix one side of velcro (supplied) to
NetWay1512 and place the second side of the velcro in the desired location.
2. Connect structured cable from port marked [IN] on NetWay1512 to any ports marked [OUT] of NetWay1,
NetWay8, NetWay8M, NetWay16, or NetWay16M (Fig. 1, pg. 2).
3. Connect structured cable from port marked [OUT] on NetWay1512 to the IP device (Fig. 1, pg. 2).
4. Connect 12VDC output from NetWay1512 terminals marked [+ 12VDC –] to the power input of the
IP device (Fig. 1, pg. 2). Polarity must be observed.
5. Power LED indicator will illuminate on NetWay1512 under normal conditions (Fig. 1, pg. 2).
Fig. 1
Agency Listings:
• UL 60950-1 Information Technology Equipment.
• CE European Conformity.
Additional Features:
• Power LED indicator.
• Compact insulated housing.
• Plug-and-play installation.
NetWay1512:
• 12VDC/15W adapter for non-PoE compliant
IP devices.
• PoE Mode “B” compliant.
NetWay3012:
• 12VDC/30W adapter for non-PoE compliant
IP devices.
• PoE+ Mode “A / B” compliant.
12VDC
Power to
Device
--
+
Structured Cable from
NetWay1, NetWay8,
NetWay8M, NetWay16
or NetWay16M
Structured Cable
from IP Device
Netway1512
Adapter
IN OUT
12VDC
+ Output –
I.T.E.
43KC
www.altronix.com
Made in U.S.A.

NetWay1512 / NetWay3012 - 3 -
NetWay3012 for 12VDC IP Devices up to 30W:
1. Mount NetWay3012 in proximity to IP device utilizing mounting hole (Fig. 2, pg. 3). Use a proper fastener
and/or wall anchor when securing NetWay3012 to the wall.
2. Connect structured cable from port marked [IN] on NetWay3012 to ports marked [OUT] of NetWay8,
NetWay8M, NetWay16, or NetWay16M (Fig. 2, pg. 3).
3. Connect structured cable from port marked [OUT] on NetWay3012 to the IP device
(Fig. 2, pg. 3).
4. Connect 12VDC output from NetWay3012 terminals marked [+ 12VDC –] to the power input of the
IP device (Fig. 2, pg. 3). Polarity must be observed.
5. Power LED indicator will illuminate on NetWay3012 under normal conditions (Fig. 2, pg. 3).
Fig. 2
Power LED
12VDC Power
to Device
--
+
Structured Cable
from IP Device
Structured Cable
from PoE+
Switch or Midspan
Netway3012
Adapter
www.altronix.com
Made in U.S.A.
IN OUT
12VDC
+ Output ---
I.T.E. 43KC

- 4 - NetWay1512 / NetWay3012
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA | phone: [phone] | fax: [phone]
website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty | Made in U.S.A.
IINetWay1512/NetWay3012 E29R MEMBER
Video Monitor
NVR/Network Server
Network Switch
NetWay1512
(Mode “B”)
NetWay1512
(Mode “B”)
NetWay1512
(Mode “B”)
NetWay3012
(Mode “A / B”)
NetWay3012
(Mode “A / B”)
12VDC
IP PTZ
12VDC
IP PTZ
12VDC
IP camera
12VDC
IP camera
12VDC
IP camera
Typical Application:
Fig. 3