Altronix Pace1STR User manual

Overview:
Pace1STR is a long range Ethernet adapter kit that transmits data at 100Mbps full duplex and
power via CAT5e or higher cable in a PoE(+) compliant format. Pace1PRM receiver is powered
via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the
PoE(+) compliant power over the cable to the Pace1ST mini transceiver which, in turn, passes this
power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions
for IP devices that need to be installed at distances greater than 100m.
Features:
Rev. 022015
Installation Guide
Pace1STR
IP and PoE+ over extended distance CAT5e
Kit includes Pace1PRM Receiver and Pace1ST Mini Transceiver
Agency Listings:
• UL/cUL Listed for Information
Technology Equipment (UL 60950-1).
• CE approved.
Input (Pace1PRM):
• Powered by midspan or endspan.
PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W).
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5e or higher.
• Distance: up to 500m.
• Speed: 10/100BaseT, half/full duplex, auto
negotiation. PoE compliant to IEEE 802.3af
(15W) and PoE+ compliant to IEEE 802.3at
(30W) delivered to camera by Pace1ST.
Power provided by Pace1PRM to Pace1ST
by PoE protocol.*
• Throughput is rated to pass 100Mbps of
data at distances up to 500m.
With proper headend equipment this
supports Megapixel, HD720, HD1080.
CAT5e or Higher:
• Distance: up to 500m @ 100Mbps
(see Maximum Length of CAT5e Type vs.
Camera Power/PoE Class, pg. 3).
LED Indicators:
• Pace1PRM and Pace1ST:
Green - PoE ON (by respective RJ45 jack).
• Pace1PRM and Pace1ST (RJ45 jack):
Yellow and Green LED IP Link status,
10/100Base-T/active.
Environmental:
• Operating Temperature:
Pace1PRM:
--- 20ºC to 49ºC (-- 4ºF to 120.2ºF).
Pace1ST:
For 15W: --- 40ºC to 75ºC (--- 40ºF to 167ºF).
For 30W: --- 40ºC to 49ºC (--- 40ºF to 120ºF).
• Storage Temperature:
--- 40ºC to 75ºC (-- 40ºF to 167ºF).
• Relative humidity:
20 to 85%, non-condensing.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Retrofit digital IP cameras in an analog
CCTV CAT5e installations.
• Extend Network link distance in an
industrial environment over 610m.
• Works with Megapixel, HD720, HD1080
and VGA (SD) cameras with proper
headend equipment.
Mechanical:
• Dimensions (W x L x H approx.):
Pace1PRM:
3.5” x 3.5” x 1”
(88.9mm x 88.9mm x 25.4mm).
Pace1ST:
2.27” x 2.645” x 1.12”
(57.7mm x 67.2mm x 28.4mm).
I.T.E. 43KC
*See note on Page 2.

- 2 - Pace1STR
Installation Instructions:
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and
with all local codes and authorities having jurisdiction. Wiring should be UL Listed and/or
Recognized wire suitable for the application.
Pace1ST and Pace1PRM are not intended to be connected to outside plant leads and should be
installed indoors within the protected premises. Pace1PRM and Pace1ST are intended for indoor
use only.
1. Pace1PRM installation:
a. Secure unit to the desired mounting surface with a proper fastening device utilizing the
unit’s mounting hole (Fig. 2a, pg. 3). Unit should be mounted in proximity to ethernet
switch/network, NVR or video server.
b. Connect structured cable from ethernet midspan or endspan device to RJ45 jack marked
[PoE Input] (Fig. 2, pg. 3).
c. CAT5e or higher: Connect CAT5e or higher to connector marked [RJ45 OUT] (Fig. 2, pg. 3).
2. Pace1ST installation:
a. Secure unit to the desired mounting surface with a proper fastening device utilizing the
case’s mounting hole. Unit should be mounted in the proximity of camera/device.
b. Connect structured cable from IP camera/device to RJ45 jack marked [PoE Out] (Fig. 2, pg. 3).
c. Connect CAT5e or higher to the connector marked [RJ45 IN] from receiver (Pace1PRM)
(Fig. 2, pg. 3).
Technical Specifications:
Parameter Description
Connections RJ45 for ethernet link.
Input power
requirements
Midspan or endspan port connected.
PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W)
Indicators
Yellow (RJ45 connector):On - Link, Off - No Link, Blinking - Activity.
Green (RJ45 connector):On - 100Base-TX, Off - 10Base-T.
Green: PoE Active.
Environmental
Conditions
Operating Ambient Temperature: UL60950-1
Pace1PRM: -- 20ºC to 49ºC (-- 4ºF to 120.2ºF).
Pace1ST: For 15W: --- 40ºC to 75ºC (--- 40ºF to 167ºF).
For 30W: --- 40ºC to 49ºC (--- 40ºF to 120ºF).
Storage Temperature: --- 40ºC to 75ºC (-- 40ºF to 167ºF).
Relative humidity: 20 to 85%, non-condensing.
Operating Altitude: -- 304.8 to 2,000m.
Regulatory
Compliance
UL/cUL Listed for Information Technology Equipment (UL 60950-1).
CE approved.
Weights (approx.) Product: 0.4 lbs. (0.18 kg) | Shipping: 1 lbs. (0.45 kg).
Fig. 1 Pace1PRM Pace1ST
*Note: Caution! Once PoE connection is established between Pace1PRM and Pace1ST, disconnection from
Pace1ST will not disable the PoE output voltage on the Pace1PRM. Although the Pace1ST can be reconnected,
caution should be taken not to connect the CAT5e from Pace1PRM to any non-PoE device.
Structured
Cable to
Midspan/
Endspan
Green LED
indicates
PoE Present
from Midspan/
Endspan
Green LED
indicates
PoE being
transmitted
to Pace1ST
CAT5 or higher
from Pace1ST
PoE
Out
Pace
Receiver IP Device
CAT5e or higher
Cable from
Camera/Device
Green LED
indicates
PoE out
to Device
CAT5e or higher
Cable out to
Pace Receiver
(Pace1PRM)

Pace1STR - 3 -
Single PoE Camera Connection:
Fig. 2 Fig. 2a
Maximum Length of CAT5e Type vs. Camera Power/PoE Class:
Cable Type Total Power
Consumption
Max.
Data Distance
Max.
Power Distance
CAT5e 15W 500m 846m
CAT5e 30W 500m 423m
Note: Calculations based on 56VDC starting voltage from power source and accounts for a
10VDC voltage drop. IEEE standards voltage range requirement for powered devices are:
PoE (15W) - 37VDC to 57VDC
PoE+ (30W) - 44VDC to 57VDC.
PoE compliant
100m max.
100m max.
Mounting Hole
PoE Camera
Pace1ST
Pace1PRM
RJ45
Link
Output
PoE
LED
Input
PoE
LED
UTP
Link
PoE
Input
I.T.E. 43KC
Z1409
RJ45 LEDs Yellow - Activity
Green - Speed
Green LED Power and PoE
www.altronix.com
IP-UTP Receiver
Passes PoE/PoE+
Pace1PRM - Receiver
Structured Cable
Legend:
PoE+ over CAT5e up to 500m max.
Powered Switch
or MidSpan
RJ45 LEDs Yellow - Speed
Green - Activity
Green LED Power and PoE
www.altronix.com
Supports PoE/PoE+
Pace
Receiver IP Device
PoE
Out
Pace1ST - Transceiver
I.T.E. 43KC

- 4 - Pace1STR
Notes:
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA | phone: [phone] | fax: [phone]
website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty | Made in U.S.A.
IIPace1STR H18Q MEMBER