Altronix TMV2 User manual

TMV2 - Altronix / Mercury / HID VertX Door Backplane - 1 -
Overview:
TMV2 accommodates a variety of Mercury/HID VertX®boards with or without Altronix sub-assemblies for access systems of up to
twelve (12) doors.
Specifications:
• 16 Gauge backplane.
Dimensions (H x W x D): 23.75” x 18.125” x 0.3125” (603.3mm x 460.3mm x 7.9mm).
Backplane Accommodates a Combination of the Following:
• Up to three (3) ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), VR6, GB1 (Genetec Synergis Cloud Link adapter plate).
• Up to six (6) Mercury EP1502, MR52, MR16IN, MR16OUT, EP2500, MUX8.
• Up to six (6) Vertx®V100, V200, V300, V1000, V2000.
Hardware:
Snap on Standoff Nylon Standoff 7/8” Pan Head Screw Lock Nut
TMV2_Rev. 110217
Access & Power Integration
TMV2
- Altronix/Mercury/HID VertX®door backplane for Trove2 and Trove3
Installation Guide
SIGNALING

- 2 - TMV2 - Altronix / Mercury / HID VertX Door Backplane
A
A
A
A
A
A
B
B
B
B
B
B
C
C
C
TMV2: Configuration of Mercury and/or Altronix Boards
Mercury Access Controllers:
1. Fasten snap on standoffs onto metal pems configuration (A) (B) of backplane depending on the access controller (Fig. 1, pg. 2).
2. Position access controller module over corresponding standoffs and depress onto snap on standoffs (Fig. 1a, pg. 2).
3. Mount backplane to enclosure with hardware.
Altronix Sub-Assemblies and/or Adapters:
1. Fasten nylon / snap on standoffs to pems which match the hole pattern for Altronix Sub-Assemblies (Fig. 1, 1a, pg. 2).
2. Mount boards to standoffs utilizing pan head screws provided with the product or by depressing board onto snap on standoff
(Fig. 1, pg. 2).
Note: For GB1 please use standoffs supplied with the adapter.
Access Controller Position Chart for the Following Models:
Mercury
Access Controller Pem Mounting
EP1502, MR52, MR16IN, MR16OUT A
EP2500, MUX8 B
Altronix
Sub-Assembly or Adapter Pem Mounting
ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), VR6, GB1 (Genetec Synergis Cloud Link adapter plate) C
Fig. 1
Snap on
Standoff
N
ylon
Standoff
Sub-Assembl
y
Backplane
Pem
Fig. 1a

TMV2 - Altronix / Mercury / HID VertX Door Backplane - 3 -
TMV2: Configuration of HID VertX®and/or Altronix Boards
HID VertX®Access Controllers:
1. Fasten standoffs (provided) to pems which match the hole pattern for HID VertX®V100, V200, V300, V1000 or V2000 boards
(Fig. 2, pg. 3).
2. Mount boards to standoffs (Fig. 2, pg. 3) utilizing 7/8” pan head screws (provided).
3. Fasten backplane to Trove2 enclosure door utilizing lock nuts (provided).
Altronix Sub-Assemblies and/or Adapters:
1. Fasten nylon / snap on standoffs to pems which match the hole pattern for Altronix Sub-Assemblies (Fig. 1, 1a, pg. 2).
2. Mount boards to standoffs utilizing pan head screws provided with the product or by depressing board onto snap on standoff
(Fig. 1, pg. 2).
Note: For GB1 please use standoffs supplied with the adapter.
Access Controller Position Chart for the Following Models:
HID VertX®
Access Controller Pem Mounting
V100, V200, V300, V1000 or V2000 A
Altronix
Sub-Assembly or Adapter Pem Mounting
ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), VR6, GB1 (Genetec Synergis Cloud Link adapter plate) B
Fig. 2
A A
A A
A A
B
B
B
Pem
Standoff
Access Controller
or Sub-Assembly Backplane
Pan Head
Screw
Fig. 2a

- 4 - TMV2 - Altronix / Mercury / HID VertX Door Backplane
TMV2 Backplane Dimensions (H x W x D):
23.75” x 18.125” x 0.3125” (603.3mm x 460.3mm x 7.9mm)
13.7”
(350mm)
13.7”
(350mm)
7.4”
(188mm)
8”
(203.2mm)
7.85”
(199.4mm)
7.5”
(190.5mm)
18.125”
(460.3mm)
10.82”
(274.8mm)
2.075”
(52.7mm)
23.75”
(603.3mm) 0.45”
(11.4mm)
8.7”
(221mm)
11.8”
(299.7mm)
8.7”
(221mm)
0.156”
( 4mm)
Altronix is not responsible for any typographical errors.
140 58th Street, Brooklyn, New York 11220 USA | phone: [phone] | fax: [phone]
web site: www.altronix.com | e-mail: [email protected] | Made in U.S.A.
IITMV2 A16S
MEMBER