Altronix ALTV2432300UL3 User manual

ALTV2432300UL3
- 24VAC @ 12.5A (300VA)
or 28VAC @ 10A (280VA).
- Thirty-two (32) Fuse Protected Outputs.
ALTV2432600UL3
- 24VAC @ 25A (600VA)
or 28VAC @ 20A (560VA).
- Thirty-two (32) Fuse Protected Outputs.
ALTV2432300ULCB3
- 24VAC @ 12.5A (300VA)
or 28VAC @ 10A (280VA).
- Thirty-two (32) PTC Protected Outputs.
ALTV2432600ULCB3
- 24VAC @ 25A (600VA)
or 28VAC @ 20A (560VA).
- Thirty-two (32) PTC Protected Outputs.
ALTV2432UL3 Series
CCTV Power Supplies with
Factory installed 3-wire line cord
Models Include:
Rev. 040506 More than just power.TM
Installing Company: _______________ Service Rep. Name: __________________________________
Address: _____________________________________________ Phone #: __________________
Installation Guide

- 2 - ALTV2432UL3 Series Installation Guide
Overview:
Altronix ALTV2432UL3 Series CCTV Power Supplies provide 24VAC or 28VAC distributed via thirty-two (32) fuse
or PTC protected outputs for powering CCTV cameras, heaters and other video accessories.
Thirty-Two (32) Output ALTV2432UL3 Reference Chart:
Altronix
Model Number
Output Voltage Total Output Current (Power) Number of Outputs PTC Protected auto- resettable Outputs (Class 2 Rated power- imited for Dry locations, Class 3 for Wet locations) Fuse Protected Class 1 Outputs Individual Output Current (max per output, not to exceed total output current) Fuse Ratings 115VAC 60Hz Input Current Agency Listings
ALTV2432300UL3 24VAC
12.5A 32
–P3.5A 3.5A 2.7A
28VAC 10A
ALTV2432300ULCB3 24VAC
12.5A 32
P– 2.5A – 2.7A
28VAC
10A
ALTV2432600UL3
24VAC 25A 32
–P3.5A 3.5A 5.4A
28VAC 20A
ALTV2432600ULCB3
24VAC 25A 32
P– 2.5A – 5.4A
28VAC
20A
Specifications:
Agency Listings:
• UL Listed for Commercial CCTV Equipment (UL 2044).
CUL Listed - CSA Standard C22.2 No.1-98,
Audio, Video and Similar Equipment.
• CE European Conformity.
Input:
• 115VAC, 50/60Hz.
Output:
• Thirty-two (32) fuse or PTC protected outputs.
• 24VAC or 28VAC output
• Outputs are rated @ 3.5A (fused) or 2.5A (PTC).
• Surge suppression.
Features:
• AC power LED indicator.
• Illuminated power disconnect circuit breaker
with manual reset.
• Unit maintains camera synchronization.
• Ease of installation saves time and eliminates
costly labor.
• Spare fuses included (on fuse protected models).
• Factory installed 3-wire line cord.
Enclosure Dimensions (H x W x D):
13.5” x 13” x 3.25”
(342.9mm x 330.2mm x 82.6mm).
Installation Instructions:
Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/NFPA 72/ANSI, and with all
local codes and authorities having jurisdiction. Product is intended for indoor use only.
1. Mount unit in the desired location. Mark and predrill holes in the wall to line up with the top two keyholes
in the enclosure. Install two upper fasteners and screws in the wall with the screw heads protruding. Place
the enclosure’s upper keyholes over the two upper screws, level and secure. Mark the position of the lower
two holes. Remove the enclosure. Drill the lower holes and install the three fasteners. Place the enclosure’s
upper keyholes over the two upper screws. Install the two lower screws and make sure to tighten all screws
(Enclosure Dimensions, pg. 8). Secure enclosure to earth ground.
2. Turn OFF main switch on the unit (Figs. 1 - 2, pgs. 4 - 5).
3. All units are factory set for 24VAC operation.
For 28VAC operation (where available) adjust unit prior to mounting and applying power as follows:
Change the wire position so that the black wire [28V] is connected to the terminal marked [P] and
the yellow wire [24V] is connected to the terminal marked [S].
4. Plug-in 3-wire line cord (Figs. 1 - 2, pgs. 4 - 5).

ALTV2432UL3 Series Installation Guide - 3 -
Keep power-limited (PTC protected outputs only) wiring separate from non power-limited wiring.
Minimum 0.25” spacing must be provided. Use separate knockouts.
5. Measure output voltage before connecting devices. This helps avoid potential damage.
CAUTION: Determine the maximum operating voltage of the equipment being powered before
adjusting the output voltage.
6. Connect devices to terminals marked [1P - 1N] through [16P - 16N] on PD16W/PD16WCB board
(Figs. 1 - 2, pgs. 4 - 5), carefully observing polarity. Terminals marked [1P - 16P] are of the same polarity.
7. Turn main switch on unit to the ON (RESET) position (Figs. 1 - 2, pgs. 4 - 5).
8. Green LED(s) will illuminate when unit is powered.
9. Upon completion of the wiring secure enclosure door with screws (supplied).
Caution: Equipment to be installed/serviced by authorized/trained personnel only.
Shut branch circuit power before installing/servicing equipment.
WARNING: To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. This
installation should be made by qualified service personnel and should conform to the National Electrical
Code and all local codes. Use 75˚C or higher rated UL insulated wiring for connecting the unit to the
mains. Replace fuses with the same type and rating (refer to Thirty-Two (32) Output ALTV2432UL3
Reference Chart, pg. 2).
Terminal Identification:
PD16W/PD16WCB - Distribution Module
1P - 16P AC output.
1N - 16N AC output.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of an insulated DANGEROUS VOLTAGE within the product’s enclosure that may be of
sufficient magnitude to constitute an electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of impor-
tant operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: To reduce the risk of electric shock do not open enclosure.
There are no user serviceable parts inside.
Refer servicing to qualified service personnel.

- 4 - ALTV2432UL3 Series Installation Guide
Illuminated Power Disconnect
Circuit Breaker with manual reset
N
XFMR INPUT SP
P N
312 45678
PROTECTED
OUTPUTS
OUTPUTS
COMMON
111091213
P
161514
N
3.5A 250V
N
XFMR INPUT SP
P N
312 45678
PROTECTED
OUTPUTS
OUTPUTS
COMMON
111091213
P
161514
N
3.5A 250V
N
XFMR INPUT SP
P N
312 45678
PROTECTED
OUTPUTS
OUTPUTS
COMMON
111091213
P
161514
N
Used on
ALTV2432300ULCB3
Power-Limited Class 2
Power Distribution Board
PTCs
Green
Ground Wire
non power-limited
Black Lead
White Lead
Green Lead
(ground)
Input
115VAC, 50/60Hz
Fig. 1 - ALTV2432300UL3, ALTV2432300ULCB3

ALTV2432UL3 Series Installation Guide - 5 -
Fig. 2 - ALTV2432600UL, ALTV2432600ULCB
Illuminated Power Disconnect
Circuit Breaker with manual reset
Black Lead
White Lead
Green
Lead
(ground)
non power-limited
Input
115VAC, 50/60Hz
N
XFMR INPUT SP
P N
312 45678
PROTECTED
OUTPUTS
OUTPUTS
COMMON
111091213
P
161514
N
3.5A 250V
N
XFMR INPUT SP
P N
312 45678
PROTECTED
OUTPUTS
OUTPUTS
COMMON
111091213
P
161514
N
3.5A 250V
N
XFMR INPUT SP
P N
312 45678
PROTECTED
OUTPUTS
OUTPUTS
COMMON
111091213
P
161514
N
Power Distribution Board
PTCs
Used on
ALTV2432600ULCB3
Power-Limited Class 2

- 6 - ALTV2432UL3 Series Installation Guide
Notes:

ALTV2432UL3 Series Installation Guide - 7 -
Notes:

- 8 - ALTV2432UL3 Series Installation Guide
Enclosure Dimensions (H x W x D):
13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.6mm)
1.40”
(35.6mm)
1.40”
(35.6mm)
1.40”
(35.6mm)
4.85” (123.2mm) 4.85” (123.2mm)
3.25” (82.6mm)
0.75”
(19.1mm)
0.75”
(19.1mm)
11.0” (279.4mm)
12.5” (317.5mm)
1.20”
(30.5mm)
1.20”
(30.5mm)
0.9375” (23.8mm)
0.9375” (23.8mm)
5.10” (129.5mm)
1.40”
(35.6mm)
5.10” (129.5mm)
6.5625” (166.7mm)
3.25” (82.6mm)3.25” (82.6mm)
3.25” (82.6mm)
10.5” (266.7mm)
1.0”
(25.4mm)
1.0”
(25.4mm)
1.0” (25.4mm)
13.0” (330.2mm)
5.10” (129.5mm)
1.20”
(30.5mm)
Altronix is not responsible for any typographical errors.
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
140 58th Street, Brooklyn, New York 11220 USA | phone: [phone] | fax: [phone]
website: www.altronix.com | e-mail: [email protected] | Lifetime Warranty
IIALTV2432UL3 Series L03U MEMBER