Overview:
Pace1PRMHT is a long range Ethernet receiver which transmits data at 100Mbps full duplex and power via a
CAT5e or higher cable in a PoE(+) compliant format. Pace1PRMHT receiver is powered via a PoE midspan, such
as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over the cable
to the Pace1PTM transceiver which, in turn, passes this power to an enabled IP camera/device. These plug and
play units facilitate cost-effective solutions for IP devices that need to be installed at distances greater than 100m.
Features:
Agency Listings:
• CE European Conformity.
Input:
• Powered by midspan or endspan.
PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W).
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair CAT5 structured cable.
• Distance: up to 500m.
• Speed: 100BaseT, full duplex, auto negotiation.
PoE compliant to IEEE 802.3af (15W) and
PoE+ compliant to IEEE 802.3at (30W)
delivered to camera by Pace1PTM.
Power provided by Pace1PRMHT to Pace1PTM by
PoE protocol.*
• Throughput is rated to pass 100Mbps of data at
distances up to 500m. With proper headend
equipment, this supports Megapixel, HD720, HD1080.
CAT5e or Higher:
• Distance: up to 500m @ 100Mbps
(see Maximum Length of CAT5e
vs. Camera Power/PoE Class, pg. 4).
LED Indicators:
• Green - PoE ON (by respective RJ45 jack).
• Yellow and Green LED IP Link status,
100Base-T/active.
Environmental:
• Operating Temperature:
Pace1PRMHT:
For 15W: – 40ºC to 75ºC (– 40ºF to 167ºF).
For 25W: – 40ºC to 49ºC (– 40ºF to 120ºF).
Pace1PTM:
For 15W: – 40ºC to 75ºC (– 40ºF to 167ºF).
For 25W: – 40ºC to 70ºC (– 40ºF to 158ºF).
For 30W: – 40ºC to 60ºC (– 40ºF to 140ºF).
• Storage Temperature:
– 40ºC to 75ºC (-40ºF to 167ºF).
• Humidity: 20 to 85%, non-condensing.
Functions:
• Auto detection and protection of legacy
non-PoE cameras/devices.
Applications:
• Extend Network link distance in an industrial
environment over 700m.
• Retrofit digital IP cameras in an analog CCTV
CAT5e wired installations.
• Works with Megapixel, HD720, HD1080,
and VGA (SD) cameras.
Mechanical:
• Dimensions (W x L x H approx.):
3.5” x 3.5” x 1” (88.9mm x 88.9mm x 25.4mm).
* See note on Page 3.
Pace1PRMTHT
IP and PoE+ Over
Extended Distance CAT5e
Kit includes Pace1PRMHT Receiver and Pace1PTM Transceiver
Installation Guide
