Security Warning：
1. Never operate the floodlight with wet hands or if you are staying on wet ground
2. Before changing the PCB or LED bulb, disconnect the power, unplug.
3. Do not look directly at lighted floodlight.
4. The floodlight is not qualified for operation in environment with existing danger of
explosion.
5. Keep the light away from flammable surfaces and objects. Danger of fire!!!
6. Installation and maintenance and repair should be done by a qualified electrician.
7. Always disconnect the power, unplug before off working.
8. Whenever the safety glass breaks, it should be replaced immediately.
Assembly and Use
Mount the floodlight housing to the stand pole by tighten the center knob clocking wise
until secure. Do not over tighten.
