ALZA ID205U User manual

Smart Bracelet ID205U
USER MANUAL • UŽIVATELSKÁ PŘÍRUČKA •
POUŽÍVATEĽSKÁ PRÍRUČKA •
HASZNÁLATI ÚTMUTATÓ • BENUTZERHANDBUCH

2
English
3 – 16
Čeština
17 – 30
Slovenčina
31 – 44
Magyar
45 – 59
Deutsch
60 – 74

3
The user manual contains product features, instructions for use, and the operating
procedure. Read the user manual carefully to get the best experience and avoid
unnecessary damage. Keep this manual for future reference.
Importer: Alza.cz a.s., Jankovcova 1522/53, 170 00 Praha 7, www.alza.cz
Pairing Your Watch
1. Downloading and Installing App
You can set up the watch through the VeryFitPro app for iOS or Android devices. The
steps are as shown below.
Note: hardware and system of devices must meet the requirements.
iOs 8.0 & above
Android 4.4 & above
Bluetooth support (4.2 &
above)
Correct operation: Scan the QR
code below or download the
VeryFitPro app through the
mobile app store. Pair the watch
up with your device using the
app.
Wrong operation: Pairing the
watch directly using the
bluetooth connection in your
mobile phone’s settings.

4
2. Pairing Process
1. Turn on the Bluetooth
and GPS on your
mobile phone.
2. Find the binding
request on the pull-
down list on the
homepage of the app.
Select product
model: ID205U
Click “OK“ to
complete binding.
Notes:
•During the pairing process, the VeryFitPro app will prompt you to enable GPS and
Bluetooth, and to authorize the VeryFitPro app to get access to the GPS on your
mobile device.
•iPhones will not prompt you with any information unless you complete Bluetooth
pairing on your ID205U watch in the built-in Bluetooth in your mobile phone after
binding.

5
Synchronous Data
In daily wear, the watch can detect all kinds of product data. The user needs to connect
the watch with bluetooth on the app before synchronous operation. The detailed
operations are shown as follows:
Open the mobile APP > swipe down the page > sync prompt appears.
Notes:
•Please synchronize the data at least once every 7 days to avoid data loss at the
watch end.

6
Instructions for Use
1. Charging Schematic
Connect and charge the watch according to the picture. It needs to be charged to
activate the watch when it is started up for the first time.
2. Wearing / Installation
Wear
Replace the strap
Wear the device a finger’s distance from
the wrist bone and adjust the tightness of
the wristband to a comfortable position.
Flip the switch and take
out the wristband.
Tip: Wearing the device too loosely may affect the accuracy of heart rate data.

7
Operating Instructions
1. Definition of Key Functions
Press the right key
to return to previous
interface.
2. Watch Dial Switch
Replacing the dial
interface will appear
after pressing and
holding the dial.

8
3. Main Interface Operation
Swipe the screen to enter different interfaces (interactive interface tile diagram).

9
Function Introduction
1. Icon Function Introduction
Enter the sports window,
and choose different
sports modes. Change
the sports moe on the
app.
Perform a heart rate
test to check your heart
rate data for the day.
Suitable for measuring
blood oxygen levels.
Suitable for measuring
diastolic/systolic blood
pressure.
*Blood pressure
measurements are for
reference only.
Help yourself to
regulate your breathing
and relax your mood.
View, turn off or turn on
the alarm clock. You need
to add an alarm clock on
the mobile APP.
Control music play on
your mobile phone
(watch cannot store
music)
Timing and countdown
functions.
Record recent sports.
Notes: For more functions (sleeping) and operations, please check the VeryFitPro
software of the mobile phone.

10
2. Starting Sports Mode
1. Enter Sports Mode
Click the sports icon →select your desired sports type → enter the sports
countdown automatically.
2. During Sports Mode
Pause sports: press the right key.
Restore sports: press the right key.
3. Ending Sports Mode
End sports: press and hold the right key → select the end button on the screen.
3. Women’s Health Tracking
Display location: in the data bar.

11
Product Parameters
Model
ID205U
Screen Type
1.3-inch colour
screen
Battery Capacity
210mAh
Charging Voltage
5V±0.2V
Charging Time
About 2.5 hours
Battery Life
7-9 days
Waterproofing
Level
5ATM
Weight of Product
39g
Operating
Temperature
-20°C – 45°C
Bluetooth Version
BLE 4.2
Product Frequency
2402-2480MHz
Max. Transmission
Power Consumption
0.75dBm
Range of charging temperature: 10°C – 45°C
Battery life: Actual battery life and charging time will vary depending on usage,
environment, etc.
Waterproof: Not suitable for diving, swimming in the sea, or saunas, but suitable for
swimming in swimming pools or showers (cold water) and shallow beaches.
Cleaning and Maintenance
It is recommended to wear and maintain the product according to the following three
points:
1. Keep the product clean.
2. Keep the product dry.
3. Do not wear it too tight.
•Do not use household cleaners to clean the watch, but use soap free detergent.
•It is not recommended to use alcohol to scrub stains that are not easy to remove.

12
Frequently Asked Questions
1. Mobile app search for the watch failed.
a. It is recommended to update VeryFitPro to the latest version.
b. It is recommended to close all programs, restart your Bluetooth
connection, and then try to connect again.
c. Confirm, whether the mobile phone system meets the minimum system
requirements listed above.
2. The watch received no alerts, text messages or phone calls.
a. You need to turn on the smart reminder function and the call reminder
switch in the app, and synchronize it to the watch.
b. Your phone needs to be paired with the watch via Bluetooth. (Please
check the “Synchronous Data“ section in this manual for details.)
c. You need to keep your watch connected to Bluetooth.
3. The Bluetooth connection disconnects often.
a. If the distance between the watch and the mobile phone is too large
(more than 7 meters), the connection effect is weakened.
b. Make sure that there are no objects or people between the device and
your mobile device. Wearing metal jewellery, etc., will interfere with the
Bluetooth connection signal.
c. Check, whether the Bluetooth function on your phone is working properly.
4. Data Backup
a. The data of the watch is synchronized at least once every 7 days to the
mobile phone (the watch end only keeps the data from the last 7 days).
5. Restarting the Device
a. Shutdown operation: Watch → Set → Shutdown → Right-key → Restart

13
6. Do I need to keep my Bluetooth on when I wear my watch?
a. For the three functions, i.e. counting steps, sleeping and alarm clock, you
do not need to have the watch connected to your mobile device at all
times. If you only need to wear a watch when you exercise, you can
connect the watch and your mobile phone to view the data synchronously
after the exercise.
b. For the functions of call alert, message alert, and find the phone, you need
to turn on the mobile phone’s Bluetooth and maintain the connection with
the mobile phone.
•More detailed questions can be answered with help and feedback in the app.
Operation steps: VeryFitPro →→ Help and Feedback.
Safety and Product Information Notes
Battery Warning
Do not disassemble, bore or damage the battery. Do not disassemble the built-in
batteries or non-replaceable battery devices. Do not use sharp objects to remove the
battery.
Health Warning
If you are wearing a pacemaker or other implanted electronic devices, please consult
your doctor before using the heart rate monitoring strap.
The watch’s optical heart rate sensor glows green and flashes. If you suffer from
epilepsy or are sensitive to blinking light sources, please consult your physician if you
can wear this product.
The device tracks your daily activities through sensors. This data is intended to tell you
about your daily activities, such as steps, sleep, distance, heart rate and calories, but
may not be completely accurate.
By using this product, you agree that the measurements are indicative, cannot be taken
into account and do not in any way replace a doctor’s evaluation (or other therapies)!
Therefore, do not evaluate the measured values yourself and do not determine the
therapy yourself according to them. Follow your doctor's instructions and trust his
diagnosis. Take your medicine as instructed by your doctor and never change the dose.
The measured values determined by you can only be used for your information - they
do not replace a medical examination! Discuss your measured values with your doctor,
definitely do not make any medical decisions based on them (for example, the use of
drugs and their dosage)!
The importer is not liable for the measured values.

14
Do not use the watch in extreme temperatures (below -10 ° C and above 40 ° C).
Reassembling or modifying the product impairs its safety. All modifications and repairs
to the equipment or accessories must be carried out by a specialist. Never open or
repair the product yourself! Handle the product carefully. It can be damaged by blows,
falling from a height, etc.
Technical specifications are subject to change without notice. Never heat the battery
above 50°C and do not dispose of in fire, risk of explosion / fire! Do not short-circuit the
battery. Do not subject the battery to mechanical stress. Avoid dropping, bumping,
bending, twisting or cutting the battery. If the battery overheats, stop charging
immediately. A battery that overheats or deforms during charging is defective and
should not be used. Never discharge the battery completely, as this will shorten its
lifespan.
Store out of direct sunlight at room temperature.
Keep the product out of the reach of small children – there is a risk of suffocation by
small parts.
Do not place the device near heat sources.
Connect to the correct power sources.
Cycling Warning
Please maintain good judgment at all times and ride in a safe manner. Make sure your
bike and hardware are properly maintained, and all components are properly installed.
Matters Needing Attention
•Watch data needs to be stored once every 7 days to avoid data loss.
•The watch has no waterproof effect on seawater, acidic and alkaline solutoons,
chemical reagents and other corrosive liquid. The damage or defects caused my
misuse or improper use are not covered by the warranty.
•Sports mode supports up to 6 hours of exercise at a time.
•Avoid wearing the watch too tightly in daily use. Please keep the parts of the
watch touching the skin dry.
•When your heart rate is measured, keep your arm still during the test.

15
WARRANTY CONDITIONS
A new product purchased in the alza.cz sales network is warranted for 2 years. If you
need repair or other services during the warranty period, contact the product seller
directly, you must provide proof of purchase with the original date of purchase.
The following are considered to be a conflict with the warranty conditions, for
which the claimed claim may not be recognized:
•Use of the product for a purpose other than that for which the product is intended
or failure to follow the instructions for maintenance, operation and service of the
product.
•Damage to the product due to a natural disaster, the intervention of an
unauthorized person or mechanical damage through the fault of the buyer (e.g.
during transport, cleaning by inappropriate means, etc.).
•Natural wear and aging of consumables or components during use (such as
batteries, etc.).
•Exposure to adverse external influences, such as sunlight and other radiation or
electromagnetic fields, ingress of fluid, intrusion of objects, mains overvoltage,
electrostatic discharge voltage (including lightning), faulty supply or input voltage and
inappropriate polarity of this voltage, chemical processes, e.g.used power supplies,
etc.
•If modifications, alterations, design changes, or alterations have been made to
anyone to change or extend the product's features over the purchase or use of non-
genuine components.

16
EU DECLARATION OF CONFORMITY
Identification data of the manufacturer's / importer's authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
IČO: 27082440
www.alza.co.uk
Subject of the declaration:
Title: Smart HRM Bracelet
Model: ID205U
The above product has been tested in accordance with the standard (s) used for
demonstration in accordance with the essential requirements laid down in the
Directive (s):
Directive No. 2014/53 /EU
Directive No. 2011/65/EU as amended by 2015/863/EU
Reference to harmonized standards:
EN 62479:2010
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
EN 301 489-1 V2.1.1
Draft EN 301 489-17 V3.2.0
EN 300 328 V2.1.1
Prague, 09/23/2020
WEEE
This product must not be disposed of as normal household waste in accordance with the
EU Directive on Waste Electrical and Electronic Equipment (WEEE - 2012/19 / EU). Instead
it shall be returned to the place of purchase or handed over to a public collection point
for the recyclable waste. By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste handling of
this product. Contact your local authority or the nearest collection point for
further details. Improper disposal of this type of waste may result in fines in
accordance with national regulations.
All rights reserved. ©2020 Alza.cz a.s.

17
Uživatelská příručka k výrobku obsahuje funkce výrobku, způsob použití a provozní
postup. Přečtěte si uživatelskou příručku pozorně, abyste získali ty nejlepší zkušenosti a
předešli zbytečnému poškození. Příručku uschovejte pro další použití.
Dovozce: Alza.cz a.s., Jankovcova 1522/53, 170 00 Praha 7, www.alza.cz
Párování vašich hodinek
1. Stažení a instalace aplikace
Pro zařízení iOS a Android můžete nastavit vaše hodinky skrze aplikaci VeryFitPro. Kroky
pro nastavení jsou uvedeny níže.
Poznámka: hardware a systém vašeho zařízení musí splňovat následující požadavky.
iOs 8.0 a vyšší
Android 4.4 avyšší
Bluetooth podpora (4.2a
vyšší)
Správný postup: Naskenujte níže
uvedený QR kód nebo stáhněte
aplikaci VeryFitPro skrze app
store (obchod s aplikacemi) ve
vašem mobilu. Spárujte hodinky
s vaším zařízením použitím
stažené aplikace.
Špatný postup: Spárování
hodinek přímo skrze nastavení
Bluetooth připojení ve vašem
zařízení.

18
2. Proces spárování
3. Zapněte Bluetooth a
GPS na vašem telefonu.
4. Žádost o spárování se
zobrazí na domovské
obrazovce po stažení
prstem dolu.
Zvolte model produktu:
ID205U
Stiskněte “OK” pro
dokončení propojení.
Poznámky:
•Během procesu spárování vás aplikace VeryFitPro vyzve k zapnutí GPS a
Bluetooth a k autorizaci aplikace VeryFitPro pro umožnění přístupu k GPS ve
vašem zařízení.
•iPhony vás nebudou vyzývat k žádným informacím pokud po spárování
nedokončíte párování Bluetooth na hodinkách ID205U skrze Bluetooth ve vašem
zařízení.

19
Synchronizace dat
Během běžného denního nošení mohou hodinky shromáždit mnoho druhů dat. Před
provedením synchronizace musí uživatel připojit hodinky k aplikaci skrze Bluetooth.
Postup procesu je následovný:
Otevřete mobilní aplikaci > potáhněte prstem dolu > zobrazí se výzva k sychnronizaci.
Poznámky:
•Prosím, sychnronizujte data alespoň jednou za 7 dní, předejdete tím tak možné
ztrátě dat z vašich hodinek.

20
Instrukce před použitím
1. Nabíjení
Připojte a nabijte hodinky podle obrázku. Pro aktivaci při prvním použití hodinky nabijte.
2. Nošení/ Instalace
Jak nosit
Výměna řemínku
Noste hodinky ve vzdálenosti jednoho
prstu od zápěstních kostí a upravte těsnost
řemínku do vámi pohodlné pozice.
Přepněte pojistku a vyjměte řemínek
Tip: Příliš volné nošení vašich hodinek může ovlivnit přesnost údajů o vaší tepové
frekvenci.
Pojistk