AM CHOICE RSL06-240-ARGB User manual





Components List
1.
- 1 -
2. 2* Fans
3. 8* Case Screws
4. 8* Fan Screws
5. 4* INTEL Back Plate Fixing Nuts
6. 1* INTEL Back Plate
1* CPU Integrated Water Cooling Radiator 7. 4* Fixing Nuts
8. 4* INTEL Double-ended Screw Bolts
9. 4* AMD Double-ended Screw Bolts
10. 2* INTEL Brackets
11. 2* AMD Brackets
12. 1* Adapter Cable
X1
X8
X4
X2
X2
X4
X4
X2
X8
X1
X4
X1
1 2 3
4 5 6
7 8 9
10 11 12

INTEL LGA115X/1366 Assembly Instructions
Put the rubber pads into the supporting foots of the back plate and remove the fixing nuts
from the screws.
Assemble the back plate on the back of the motherboard, and ensure that the fixing nuts
stick out from the back of the motherboard to the front.
Install the INTEL bracket on the water cooling head and fasten it with the fixing nuts.
Fasten the water cooling head with the bracket assembled and the back plate by using the
fixing nuts.
1.
2.
3.
4.
- 2 -

INTEL LGA2066/2011 Assembly Instructions
Fix the INTEL double-ended screw bolts on the motherboard.
Assemble the INTEL bracket on the water cooling head and fix it with the fixing nuts.
Fasten the water cooling head with the bracket assembled and the INTEL bracket
double-ended screw bolts by using the fixing nuts.
1.
2.
3.
- 3 -

AMD Assembly Instructions
Take out the AMD assembly frame.
Fix the AMD double-ended screw bolts on the motherboard.
Assemble the AMD brackets on the water cooling head and fix it with the fixing nuts.
Fasten the water cooling head with the brackets assembled and the AMD double-ended
screw bolts by using the fixing nuts.
1.
2.
3.
4.
- 4 -

Radiator Assembly Instructions
1.
2.
3.
4.
- 5 -
If the radiator is directly assembled inside the computer, please use the fan screws and
washers to fix the fan and the radiator first. Then use the case screws and washers to
fasten the radiator on the case.
If the radiator is directly assembled on the case of the computer, please assemble the fan
with the fan screws and washers first. Then, assemble the radiator with the case screws
and washers.
If the fan is assembled between the radiator and the case, please fix it with the fan screws
and washers.
If the fan is assembled between the radiator and the base of the computer, please fix it
with the fan screws and washers.

Connection
Connect the power cable on the water cooling head with the 4-pin plug on the mother-
board.
Connect the adapter cable with the 4-pin plug on the motherboard, and then connect the
power cable of the fan with the adapter cable.
Connect the ARGB cable of one fan with the 3-pin plug on the motherboard, and the ARGB
cable of another fan is connected in series with the power cable of the fan through the
adapter cable.
1.
2.
3.
- 6 -
4-PIN/CPU_FAN/CPU_OPT
AIO_PUMP/W_PUMP
CPU_FAN/CPU_OPT
Connection

Contact Us
Thank you for purchasing this product. If you have any questions or encounter any problems
in the process of using this product, please contact us via [email protected].
Please provide a detailed description of the problems and proof of purchase when contacting
us. If you have any comments or suggestions, please contact our design team via
[email protected].
For more information about the product, please scan the QR code on the product for inquiry.
- 7 -