Amart Furniture AZURA 73981 User manual

15-1573981
SAFETY BRACKETS INSTRUCTIONS
1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach the
Mounting Plate into a stud. If mounting into brick or masonry you will need to acquire
wall anchors. Please enquire with your local hardware supplier for appropriate fixings.
2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
3. Move the furniture to its final position. Thread a Wall Strap through the both Mounting
Plates and tighten until snug. Do not over tighten.
4. Make sure that the Mounting Plates are firmly attached to the wall and furniture and
that the Wall Strap is snug.
HARDWARE
Mounting Plate x 2 Wall Strap x 1 Large Screw x2 Small Screw x2
This furniture poses a tipping risk and as such must be secured to a wall using the provided
tipping kit.

PRODUCT CARE:
To protect your furniture, we suggest the following:
• Avoid placing your furniture in direct sunlight.
• Do not place furniture directly under windows.
• Do not place sharp materials (knife, fork, etc.) directly onto your furniture as
sharp material may scrape and damage the finish.
• Do not place material with high temperature directly onto the surface of your
furniture.
• Clean up spills quickly. Water left over a prolonged period of time may cause
damage. Alcohol, perfume, nail polishes, aftershave and some medication may
cause severe finish damage if not cleaned immediately.
• Use a clean, soft, dry, lint free absorbent cloth to clean your furniture. Do not
use any detergent as they may contain ingredients that may react and damage
the finish.
• NOTE: If the above care advise is not adhered to your product warranty may
become void