Amart Furniture Signature Nero 63758 User manual

ASSEMBLY INSTRUCTION
NERO LAMP TABLE
ITEM CODE 63758
650mm
650mm
500mm
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
163758

2
suitable
and sudden
63758

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
3. Ensure that you have all required contents for complete assembly
63758
3

PARTS LIST
2
1 Top table 1 pc
NO. PARTS LIST QT'Y
Leg table 2 pcs
4
1
2
2
63758
Bolt M8x20mm 12 pcs
NO. HARDWARE LIST QT'Y
BFlat washer M8 12 pcs
A
CSpring washer M8 12 pcs
DAllen Key 4mm 1 pc
EAdhesive felt pad
20x20x5mm 8 pcs
F1 pc
Tipping Kit Strap
G
H
Screw(M4X20) 1 pc
1 pc
Flat washer
M4/Ø10x1mm

2
2
1
D
A(X12)
C(X12)
B(X12)
63758
E(X8)
STEP 1: Attach legs (2) onto top (1) using the bolts M8x20 (A), flat washers (B)
and spring washers (C), tighten it up by using an allen key (D).
Attach adhesive felt pad (E) onto the legs (2)
5
STEP 2: Attach Tipping Kit Strap (F) to the table top (1) by using screw (G) and
flat washer (H),tighten it up by using screw driver.
1F
H
G

63758
6
WALL
ASSEMBLY IS COMPLETE
WALL
Fixing the strap to the wall
As the wall materials vary,
screws for fixing to the wall
are not included.
For advice on suitable screws
systems, contact your local
specialised dealer.