Amart Furniture PIRIE 71673 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
PIRIE ACCENT CHAIR
ITEM CODE 71673
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
171673

271673
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
Allow 15 min For 1 person

371673
PARTS LIST
AB C D
EFG
A
Seat*1pc
B
Leg 1*1pc
C
Leg 2*1pc
D
Bolt*4pcs
E
Spacer
*4pcs F
Allen Key
*1pc
H

471673
STEP 2: Attach Legs (B) (C) to Seat (A) with Spacers (E) and
Bolts (D) using Allen Key (F).

571673

671673
CARE AND MAINTENANCE
REGULAR CARE:
・Protect from direct sunlight
・Vacuum regularly using low suction
・Rotate reversible cushions regularly
・Avoid exposure to new clothing, cushions or throws as this may lead to dye
transfer and permanent staining
CLEANING:
・Do not remove cushion covers for separate cleaning even though they may have
zippers
・Do not wash, Do not dry clean, Do not shampoo clean
・Clean only with hot water extraction machine. Professional cleaning
recommended
・Do not use dishwashing liquid or laundry detergent. Use only upholstery
detergents
・Do not wet filling
・Dry in shade away from direct heat and sunlight
・Allow to dry thoroughly before re-use
SPOT CLEANING:
・Do not rub
・Do not spot clean with any solvent
・Treat spills and stains as soon as possible
・Gently scrape off any soil or blot any liquid from the surface of the fabric before
applying cleaner
・Apply proprietary cleaning agents strictly according to instructions to remove the
residue of the spill
・Do not saturate the fabric or interior with water or other cleaning liquids
WARNING:
Apply only water-based soil resist (fabric protection) treatments. Do not use aerosol
products
* PILLING IS NOT A FABRIC DEFECT OR FAULT AND IS NOT COVERED BY WARRANTY
* PILLING IS A NORMAL OCCURRENCE CAUSED BY WEAR AND TEAR AND DOES NOT
AFFECT THE DURABILITY OR FUNCTIONALITY OF THE FABRIC AND IS EASILY
REMOVED