Amart Furniture BENNY 75094 User manual

1
ASSEMBLY INSTRUCTION
BENNY QUEEN BED
ITEM CODE 75094
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phoneAmart Furniture, Customer Service Free call 1800 351 084
DS165V2.( V1 ) 75094

PRE-ASSEMBLY PREPARATION
Before you start :
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
2. Take care when liing. Product should be assembled as near as possible to
the point of use.
3. Ensure that you have all required contents for complete assembly.
4. Always read the assembly instrucons carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over ghten the screws and bolts as this may damage the threads.
ALLOW 25 MINUTES 2 PEOPLE REQUIRED
x 2
2
A B
2 DRAWER ( x 1 )
1 HEADBOARD ( x 1 )
4CENTRE RAIL 1540mm ( x 1)
3 SIDE RAIL ( x 2 )
6
SLAT 1540mm x 62mm x 14mm ( x12 )
CENTRE SUPPORT LEG 200mm ( x 1 )
5
C
Nylon Nut
M8 1 x C
Allen Key
M8 1 x D
D
M8x45mm 1 x B
Bolt
Bolt
M8x25mm
( Pre - assembled ) 12 x A
PARTS LIST
DS165V2.( V1 )
4.
5.
3.
2.
1.
6.
3.
75094

STEP 1 : Loosen the screw (A). Attach Side Rail (3) to Headboard(1) and Drawer(2) by
pushing the bracket down.
A. M8 X 25mm ~ 8nos
( Pre - assembled )
STEP 2 : Attach Centre Support Leg(6) to Centre Rail(4) using screw B.M8 X 45mm with
C.Nylon nut M8. Then tighten them.
B
D
C4
66
Adjustable
4.
6.
C. NYLON NUT M8
~1nos
STEP 3 : Loosen and pull the screw (A) out. Attach Centre Rail(4) to Headboard(1) and
Drawer(2) by screwing in clockwise direction and tighten them.
A.
1 & 2
4
A. M8 X 25mm ~ 4nos
( Pre - assembled )
DS165V2.( V1 )
3
1.
2.
3.
3.
A
3
1 & 2
A
D
3
1 & 2
1.
2.
3.
3.
1.
2.
4.
B. M8 X 45mm ~ 1nos
75094

Step 4 : Secure slats (5.) to Side Rail (3.) using the velcro hook and loops
System. Start from the Drawer(2.) moving towards Headboard (1.).
3
5
2
ASSEMBLY IS COMPLETED
Note : Please Lift up the bed to move, DO NOT push or pull the bed as this
may cause the support legs to bend/break or damage to flooring.
DS165V2.( V1 ) 475094

5
Product Name: BENNY QUEEN BED
75094 Item Code:
Made In MALAYSIA
Imported By:
Amart Furniture Pty Ltd,
Brisbane, Qld, Australia
Item Code: 75094
Product Name: BENNY QUEEN BED
CARE AND MAINTENANCE
PRODUCT CARE:
REGULAR CARE: PROTECT FROM DIRECT SUNLIGHT.
VACUUM REGULARLY USING LOW SUCTION.
CLEANING:
DO NOT WASH.
DO NOT DRY CLEAN.
DO NOT SHAMPOO CLEAN.
CLEAN WITH HOT-WATER EXTRACTION MACHINE.
(HOT) PROFESSIONAL CLEANING RECOMMENDED
DO NOT USE DISHWASHING OR LAUNDRY DETERGENTS.
USE ONLY UPHOLSTERY DETERGENTS.
DO NOT WET FILLING.
DRY IN SHADE AWAY FROM DIRECT HEAT AND SUNLIGHT
ALLOW TO DRY THOROUGHLY BEFORE RE-USE.
SPOT CLEANING:
DO NOT RUB.
DO NOT SPOT CLEAN WITH ANY SOLVENT.
TREAT SPILLS AND STAINS AS SOON AS POSSIBLE.
GENTLY SCRAPE ANY SOIL OR MOP ANY LIQUID FROM
THE SURFACE OF THE FABRIC.
APPLY PROPREITARY CLEANING AGENTS STRICTLY
ACCORDING TO INSTRUCTIONS TO REMOVE THE
RESIDUE OF THE SPILL.
DO NOT SATURATE THE FABRIC OR INTERIOR WITH
WATER OR OTHER CLEANING LIQUIDS.
WARNING: APPLY ONLY WATER-BASED SOIL RESIST
(FABRIC PROTECTION) TREATMENTS. DO NOT USE
AEROSOL PRODUCTS.
DS165V2.( V1 ) 75094