Amart Furniture KOBI 65770 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
KOBI LADDER DESK
ITEM CODE 65770
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
165770

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product.
2. Take care when li ing. Product should be assembled as near as possible to
the point of use.
3. Ensure that you have all required contents for complete assembly.
4. Always read the assembly instruc ons carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over ghten the screws and bolts as this may damage the threads.
30
265770
2

PARTS LIST
365770
20xD
C1
D
C2
C3
C5
C6
C7
2
1
1
1
2
1
1800x415x15mm
570x142x15mm
570x208x15mm
570x394x15mm
393x40x15mm
570x60x15mm
A B C
8xA 8xB 8xC
C4 2570x50x15mm
C8 1570x90x15mm
EF
4xD

EXPLODED VIEW
465770
C1
C2
C3
C4
C5
C6
X2
X2
C7
C8
X2

CAM LOCK INSTALLATION
565770

STEP 1
STEP 2:
665770
C2
C3
Ax4
Cx4
C2
C3
C4 x2
Cx4
Fix Cam bolt (A) to Panels (C2&C3).
Fix Dowels (C) to Panels (C2&C3).
Fix Cam Lock (B) to Panels (C4).
Fix to Panels Repeat for the Panel C3,C2&C4 by
Ax4
Bx4
．

STEP 3
STEP 4:
765770
C5
Ax4
Cx4
C6 x2
C5
Fix Cam bolt (A) to Panel (C5).
Fix Dowel (C) to Panel (C5).
Fix Cam bolt (B) to Panel (C6).
Cam lock (B) and dowels (C).
Bx4
Ax4
Cx4

STEP 5
STEP 6:
865770
C1 x2
C7
C8
Dx4
C5
Dx4
Repeat for (C8).
Dx4
C1 x2
,
Fx4
.
D+F

STEP 7
Finish
965770
C3
C2
Dx4
Dx4
C1 x2
Repeat for (C3).
,

10 65770
SAFETY BRACKETS INSTRUCTIONS
1. A ach one Moun ng Plate to the wall with the Large Screws. Make sure to a ach the
Moun ng Plate into a stud. If moun ng into brick or masonry you will need to acquire
wall anchors. Please enquire with your local hardware supplier for appropriate fixings.
2. A ach the second Moun ng Plate to the furniture frame with the Short Screws.
3. Move the furniture to its final posi on. Thread a Wall Strap through the both Moun ng
Plates and ghten un l snug. Do not over ghten.
4. Make sure that the Moun ng Plates are firmly a ached to the wall and furniture and
that the Wall Strap is snug.
HARDWARE
Moun ng Plate x 2 Wall Strap x 1 Large Screw x2 Small Screw x2
This furniture poses a pping risk and as such must be secured to a wall using the provided
pping kit.