Amart Furniture DIAMOND 50951 User manual

PAGE 1 OF 5 50951
ASSEMBLY INSTRUCTION
DIAMOND 2 SEATER SOFA
ITEM CODE 50951
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
PAGE 2 OF 5 50951

PARTS LIST
Hardware
PAGE 3 OF 5 50951
PLEASE TAKE NOTE:
PIECES REQUIRE FOR ASSEMBLY ARE LOCATED INSIDE THE DUST
COVER UNDERNEATH SOFA

Step 1
DETAILS (1) - Align each foot (D) with the pre-threaded holes in the undersides of the sofa as
shown in the below diagram. Insert Screw (C) and tighten by turning clockwise using power
tool.
Step 2
PAGE 4 OF 5 50951
IMPORTANT:
PLEASE ENSURE FEET ARE TIGHTENED SECURELY BEFORE USE!
Step 3 ASSEMBLY COMPLETED
A
B
C
D
DETAILS (2) - When assembling back to arms ,place Bracket B Into Sleeve A ,and press top of
back down firmly to lock the retaining clip into place. Listen for the clip to pop into place –
and your KD back is securely in place!

CARE LABEL
PAGE 5 OF 5 50951