Amart Furniture MARSEILLE 67369 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
MARSEILLE ROUND TABLE
ITEM CODE 67369
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please
phone Amart Furniture , Customer Service Free call 1800 351
084
1ITEM CODE 67369

PRE-ASSEMBLY PREPARATION
Before you start:
1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the
product
2.Take care when lifting. Product should be assembled as near as possible to the point of
use
3.Ensure that you have all required contents for complete assembly
4.Always read the assembly instructions carefully before beginning assembly.
5.Keep all hardware parts and packaging out of reach of small children.
6.Do not over tighten the screws and bolts as this may damage the threads
2 ITEM CODE 67369
ALLOW 20 MINITES 2 PEOPLE REQUIRED
TOOLS REQUIRED
12
11
10
9
8
765
4
3
2
1

3ITEM CODE 67369
PARTS LIST
C. ALLEN KEY
B. BOLT M8X70MM
AX12 BX8
D. FLAT WASHER
DX20
CX1
A. BOLT M8X50MM
1Round Table Top
2Upper Support Bar
3Lower Support Bar
4Pedestal
5Feet

ITEM CODE 67369
•Join Upper and Lower support bar(2)(3) together and
secure onto Pedestal (4) with Bolt (A) and Flat Washer
(D).
•Tighten with Allen Key (C).
4
C. ALLEN KEY
A. BOLT M8X50MM
4PCS 1PCS
ITEMS REQUIRED
1D. FLAT WASHER
4PCS

ITEM CODE 67369
•Flip table top(1) up side down onto the ground and
secure Upper, lower support bar(2)(3) and the
Pedestal(4) onto the table top(1)with Bolt (A) and Flat
Washer (D).
•Tighten with Allen Key (C).
5
C. ALLEN KEY
A. BOLT M8X50MM
8PCS 1PCS
ITEMS REQUIRED
2D. FLAT WASHER
8PCS

ITEM CODE 67369
•Secure feet(5) onto the Pedestal(4) with Bolt (B) and Flat
Washer (D).
•Tighten with Allen Key (C).
6
C. ALLEN KEY
B. BOLT M8X70MM
8PCS 1PCS
ITEMS REQUIRED
3D. FLAT WASHER
8PCS

7TEM ICODE 67369
ASSEMBLY IS COMPLETE

8TEM ICODE 67369
CARE AND MAINTENANCE
•A multi-step finish is applied to all our furniture, but all wood comes
from nature. Because of this, there will be natural variations in surface
texture and grain like knots, mineral streaks and sap runs that may
affect the finish. These differences in character are not defects, but
distinctions that make each piece of furniture unique.
•Our furniture is built to last. Following these steps for basic care
should protect your investment for years to come.
•Dust frequently with a clean damp lint-free cloth. This will help
remove abrasive build up which can damage a finish over time.
•Do not place hot objects on any furniture surface. Always use a hot
plate or placemat. Laminate and lacquer finishes on table tops provide
added scratch and heat resistance to our furniture, but they can still
be damaged without proper care.
•Avoid exposing your furniture to strong sunlight, heat outlet, open
windows or dampness. Prolonged exposure to direct sunlightcan fade
the finish of your furniture, while extreme temperature and humidity
changes can cause cracking or splitting.
•Do not expose your furniture to any liquids. Never allow water to sit
on your furniture. Alcohol, nail polish and perfume are also dangerous
as they will dissolve the lacquer finish on contact and may require
professional repairs.
•Do not allow plastic to come in direct contact with your furniture.
Chemicals in the plastic of placemats etc may soften and mark the
finish if left in contact with the furniture for a period of time.