Amart Furniture KIRBY 74942 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
KIRBY4 SEATER LHF CHAISE
ITEM CODE 74942
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
74942
PAGE OF 71

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose aclean, level, spacious assembly area.Avoid hard surfaces that may
damage the product
2. Take care when lifting.Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
74942
PAGE OF 72

PARTS LIST
Hardware
PAGE 3 OF 774942
PLEASE TAKE NOTE:
PIECES REQUIRE FOR ASSEMBLY ARE LOCATED INSIDE THE DUST
COVER UNDERNEATH SOFA
PART ⅠPART Ⅱ
PART ⅠPART Ⅱ
6cm 6cm

Step 1
With 2 people carefully turn lounge over onto a sheet or a piece of cardboard.
DETAILS -Align base plate of each foot (A and B) in the undersides of the sofa as shown in
the below diagram. Insert Screw (C ) and tighten by turning clockwise using screwdriver
Step 2 PART ⅠASSEMBLY COMPLETED
PART Ⅰ
74942
PAGE 4 OF 7
C
B
A
C

PART Ⅱ
Step 3
Step 4 PART ⅡASSEMBLY COMPLETED
74942
PAGE 5 OF 7
With 2 people carefully turn lounge over onto a sheet or a piece of cardboard.
DETAILS -Align base plate of each foot (A and B) in the undersides of the sofa as shown in
the below diagram. Insert Screw (C ) and tighten by turning clockwise using screwdriver
C
B

Step 5 ASSEMBLY COMPLETED
PART ⅡPART Ⅰ
PART ⅡPART Ⅰ
74942
PAGE 6 OF 7
IMPORTANT:
PLEASE ENSURE FEET ARE TIGHTENED SECURELY BEFORE USE!

CARE LABEL
74942
PAGE OF 77