Amart Furniture PHOEBE 57672 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
PHOEBE 2 SEATER SOFA
ITEM CODE 57672
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
PAGE 1 OF 5 57672

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
PAGE 2 OF 5 57672

PARTS LIST
Hardware List
PAGE 3 OF 5 57672
PLEASE TAKE NOTE:
PIECES REQUIRE FOR ASSEMBLY ARE LOCATED INSIDE THE DUST
COVER UNDERNEATH SOFA

①
①
①
①
①
Step 1
DETAILS (1) - Align base plate of each foot (B) with the pre-threaded holes in the undersides
of the sofa as shown in the below diagram. Insert Bolt (A ) and tighten by turning clockwise
using Allen key (C) . Insert Bolt (F) using additional tool.
Step 2 ASSEMBLY COMPLETED
PAGE 4 OF 5 57672
IMPORTANT:
PLEASE ENSURE FEET ARE TIGHTENED SECURELY BEFORE USE!
A
B F

CARE LABEL
PAGE 5 OF 5 57672