Amart Furniture ECHUCA 72826 User manual

1 72826
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance ith assembly or for missing parts please phone
Amart Furniture , Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
ECHUCA Dining Chair
ITEM CODE 72826
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance ith assembly or for missing parts please phone
Amart Furniture , Customer Service Free call 1800 351 084

2 72826
PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product
2. Take care hen lifting. Product should be assembled as near as possible to the point of use
3. Ensure that you have all required contents for complete assembly
4. Al ays read the assembly instructions carefully before beginning assembly.
5. Keep all hard are parts and packaging out of reach of small children.
6. Do not over tighten the scre s and bolts as this may damage the threads

3 72826
PARTS LIST
NO DESCRIPTION Qty
1 Chair back 1
2 Seat Frame
1
3 Leg 2
a. Bolt M8x45
4pcs
b. Bolt M6x60
4pcs
c. Flat Washer
(Φ8.5xΦ19)
4pcs
d. Lock Washer
(Φ8.5xΦ13)
4pcs
e. Flat Washer
(Φ6.5xΦ19)
4pcs
f. Lock Washer (Φ6.5xΦ9)
4pcs
g. Allen key M4
1pc

4 72826
ITEMS REQUIRED
• Attach chair back ( 1 ) to seat frame (2) using bolts (a), Flat Washers(c) and Lock
Washers(d).
• Tighten ith Allen Key (g).
a.
Bolt M8x45
4pcs
c.
Flat Washer
(Φ8.5xΦ19)
4pcs
d. Lock Washer
(Φ8.5xΦ13)
4pcs
g. Allen key M4
1pc

5 72826
ITEMS REQUIRED
•Attach leg (3) to seat frame (2) use bolt (b), flat asher (e) and lock asher (f).
•Tighten ith Allen Key (g).
b. Bolt M6x60
4pcs
e. Flat Washer
(Φ6.5xΦ19)
4pcs
f. Lock Washer
(Φ6.5xΦ9)
4pcs
g. Allen key M4
1pc

6 72826
ASSEMBLY IS COMPLETE
Do Not: Use chair/stool as a ladder Climb on the chair/stool. Stand on the foot-
rest of the chair/stool, as this could lead to the stool becoming unbalanced and
overturning

Care and maintenance
• A multi-step finish is applied to all our furniture, but all ood comes from
nature. Because of this, there ill be natural variations in surface texture
and grain like knots, mineral streaks and sap runs that may affect the finish.
These differences in character are not defects, but distinctions that make
each piece of furniture unique.
• Our furniture is built to last. Follo ing these steps for basic care should
protect your investment for years to come.
• Dust frequently ith a clean damp lint-free cloth. This ill help remove
abrasive build up hich can damage a finish over time.
• Do not place hot objects on any furniture surface. Al ays use a hot plate or
placemat. Laminate and lacquer finishes on table tops provide added scratch
and heat resistance to our furniture, but they can still be damaged ithout
proper care.
• Avoid exposing your furniture to strong sunlight, heat outlet, open indo s
or dampness. Prolonged exposure to direct sunlight
can fade the finish of your furniture, hile extreme temperature and
humidity changes can cause cracking or splitting.
• Do not expose your furniture to any liquids. Never allo ater to sit on your
furniture. Alcohol, nail polish and perfume are also dangerous as they ill
dissolve the lacquer finish on contact and may require professional repairs.
• Do not allo plastic to come in direct contact ith your furniture. Chemicals
in the plastic of placemats etc may soften and mark
the finish if left in contact ith the furniture for a period of time.