Amart Furniture ROSCO 64397 User manual

Furniture
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture , Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
ROSCO- BED SIDE
ITEM CODE
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture , Customer Service Free call 1800 351 084
64397
64397
1

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product
2. Take care when lifting. Product should be assembled as near as possible to the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
64397
2
2

PART LIST
a. Bolt M6x35
6pcs
b. Allen key M4
1pc
NO
1
2
DESCRIPTION
1
2
CHEST
LEG
QTY
1
1
64397
3

1ITEMS REQUIRED
a. Bolt M6x35
6pcs
b. Allen key M4
1pc
1
·With two people,carefully turn bedside over.
·Attach leg (2) to Chest (1) using bolts (a).
·Tighten with Allen Key (b).
ab
64397
4

SAFETY BRACKETS INSTRUCTIONS
1.Attach one bracket to the wall, with the long screws as shown. Make
sure to attach the bracket into a stud. If mounting onto brick or
masonry, you will need to acquire wall anchors.
2.Attach a bracket to the furniture frame under the top with the short
screws provided.
3.Move the furniture into its final position. Thread a strap through the
bracket as shown in the illustration, tighten strap until snug. Do not
over tighten.
4.Make sure the bracket is firmly attached to the wallboard and furniture,
and the strap is snug.
Bracket
Furniture top
Wallboard
N
64397
5

ASSEMBLY IS COMPLETE
6

Product Care for Timber Items Furniture
As our timber is supplied from sustainable forests there will be
natural variations in surface texture and grain like knots, mineral
streaks and sap runs that may affect the finish. These differences in
character are not defects, but distinctions that make each piece of
furniture unique
Our furniture is built to last. Following these steps for basic care
should protect your investment for years to come
•Dust frequently with a clean damp lint-free cloth. This will help
remove abrasive build up which can damage a finish over time
•Do not place hot objects on any furniture surface. Always use a
hot plate or placemat. Laminate and lacquer finishes on table tops
provide added scratch and heat resistance to our furniture, but
they can still be damaged without proper care
•Avoid exposing your furniture to strong sunlight, heat outlet,
open windows or dampness. Prolonged exposure to direct sunlight
can fade the finish of your furniture, while extreme temperature
and humidity changes can cause cracking or splitting
•Do not expose your furniture to any liquids. Never allow water
to sit on your furniture. Alcohol, nail polish and perfume are also
dangerous as they will dissolve the lacquer finish on contact and
may require professional repairs
•Do not allow plastic to come in direct contact with your
furniture. Chemicals in the plastic of placemats etc. may soften and
mark the finish if left in contact with the furniture for a period of
time