Amart Furniture KALABAN 72093 User manual

Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
ASSEMBLY INSTRUCTION
KALABAN DINING TABLE
ITEM CODE 72093
Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia.
For any assistance with assembly or for missing parts please phone
Amart Furniture, Customer Service Free call 1800 351 084
172093

PRE-ASSEMBLY PREPARATION
Before you start:
1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may
damage the product
2. Take care when lifting. Product should be assembled as near as possible to
the point of use
3. Ensure that you have all required contents for complete assembly
4. Always read the assembly instructions carefully before beginning assembly.
5. Keep all hardware parts and packaging out of reach of small children.
6. Do not over tighten the screws and bolts as this may damage the threads
272093

PARTS LIST
1 TABLE TOP
2 TABLE SUPPORT LEG
3 TABLE BOTTOM LEG
4 TABLE BOTTOM LEG
372093

STEP
1: Join table bottom leg(4) to table botom leg(3).Fasten
allen bolt(H) to table bottom legs(4)
(3) with steel washer(F),
allen key (G).
STEP 2:
Fasten threaded rod(A) to table support legs(2).Repeat
with the remaining
table support legs(2).
472093

STEP
3: Attach the table support legs (2) to table bottom legs
(3)(4)with half moon shape (B),nut(C) and spanner(D).
STEP
4: Flip the table top (1)
upside down, carefully . Fasten the
table
support legs (2)to the table top (1) with allen bolt (B) and
steel
washer (F) separately using allen key (G).
After all done,Fully tighten all the screw!
572093
Note : Do not fully tighten
the screw at this moment.

STEP
4: Flip the table upright, carefully .
Assembly is complete.
672093

772093
CARE AND MAINTENANCE
Timber
•As our timber is supplied from sustainable forests there will be natural variations in
surface texture and grain like knots, mineral streaks
•and sap runs that may affect the finish. These differences in character are not defects,
but distinctions that make each piece of
•furniture unique
•Our furniture is built to last. Following these steps for basic care should protect your
investment for years to come
•• Dust frequently with a clean damp lint-free cloth. This will help remove abrasive build
up which can damage a finish over time
•• Do not place hot objects on any furniture surface. Always use a hot plate or placemat.
Laminate and lacquer finishes on table tops
•provide added scratch and heat resistance to our furniture, but they can still be
damaged without proper care
•• Avoid exposing your furniture to strong sunlight, heat outlet, open windows or
dampness. Prolonged exposure to direct sunlight can
•fade the finish of your furniture, while extreme temperature and humidity changes can
cause cracking or splitting
•• Do not expose your furniture to any liquids. Never allow water to sit on your
furniture. Alcohol, nail polish and perfume are also
•dangerous as they will dissolve the lacquer finish on contact and may require
professional repairs
•• Do not allow plastic to come in direct contact with your furniture. Chemicals in the
plastic of placemats etc. may soften and mark the
•finish if left in contact with the furniture for a period of time